USAutomatic LCR 2-Button Basic Transmitter Instruction Manual

USAutomatic LCR 2-Button Basic Transmitter

Informazzjoni ġenerali

• The Transmitter has been designed to control automatic opening systems and anti-burglar systems.
• The operating frequency is 433.92 MHz.
• During installation, the receiver must be connected to the device it controls (gate, rolling shutters, awnings, anti-burglar appliances, lighting).
• The transmitter security code is created by 9 ways three-position dipswitches. This allows up to 19,683 code combinations.
• All the receivers for this transmitter type can store the code for multiple transmitters into the receiver’s memory.
• Each transmitter ( or its different buttons) can also be stored into multiple receivers to perform additional functions. 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations.

Speċifikazzjonijiet tekniċi

• Number of keys: Supply: 2 / 4
• Tip ta 'batterija: 1 Alkaline Battery 12V type 23A
• Ħajja tal-batterija: 12 – 18-il xahar
• Konsum kurrenti: 25 mA
• Frekwenza operattiva: 433.92 MHz
• Kombinazzjonijiet ta' kodiċi: 19683
• Modulazzjoni: AM / STAQSI
• Rated e.r.p.: 50 – 100 μW
• Firxa fl-ispazju ħieles: 180 – 360 piedi
• Temperatura operattiva: 0 – 130 °F
• Dimensjonijiet ġenerali: 3.26 x 1.88 x 0.62 pulzieri
• Piż: 20 gr.

Karatteristiċi ewlenin

• 2 button dip-switch transmitter: Punt 030210
• 4 button dip-switch transmitter: Punt 030212

KODIĊI TAS-SIGURTÀ

• Slide the access panel to the left to access the battery and the dip-switches.
• The position of the dip-switches create the security code. Warning: each transmitter is factory set with a default code.
• To help prevent unauthorized access, you must change this code by changing the positions of the dip-switches to a random pattern. Multiple transmitters can use the same switch pattern to simplify programming.

PROGRAMMAZZJONI

• The transmitter code has to be stored into the receiver memory before use.
• Simply hold down the button on the transmitter you want to use. While holding the transmitter button down, press the appropriate programming button (P1 or P2) on the receiver. Once the receiver indicator lights up, you are done. Any additional transmitters that are set to the same security code are also programmed at this time.
• Contact your dealer or distributor for additional functionality.

AĊĊESS TAL-BATTERIJA U DIP-SWITCH

• To access the battery rotate the access panel to the left. Place the 23A alkaline battery between the 2 contacts. Ensure the polarity is correct, as indicated on the bottom of the case.
• NOTA: Please dispose of used batteries properly. They are hazardous waste.

GARANZIJA

USAutomatic, LLC warrants this product to be free of defects in materials and workmanship for 1 YEAR. For a period of 1 YEAR following purchase, USAutomatic, LLC. will repair or replace the product free of charge, including parts, shop labor and return to customer shipping and handling.
Din il-garanzija ta 'SENA ma tkoprix il-kaxxa tal-plastik minn xedd normali jew ħsara minħabba użu ħażin.
Biex il-prodott jintbagħat għall-konsiderazzjoni tal-garanzija, għandu jintbagħat lura mal-prova tax-xiri u numru tal-awtorizzazzjoni tar-ritorn. Biex tikseb numru tal-awtorizzazzjoni tar-ritorn jekk jogħġbok ċempel 1-888-204-0174 għall-għajnuna. In-numru tal-awtorizzazzjoni tar-ritorn għandu jkun immarkat b'mod ċar fuq barra tal-pakkett tar-ritorn jew jista' ma jiġix aċċettat.

Tip: SETDS39433
ID tal-FCC: PWJDS433
Dan l-apparat jikkonforma mal-Parti. 15 tar-Regoli tal-FCC

It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin:

1. Dan l-apparat jista 'ma jikkawżax interferenza ta' ħsara, u
2. Dan l-apparat għandu jaċċetta interferenza riċevuta, inkluż interferenza li tista 'tikkawża operazzjoni mhux mixtieqa.

Avviż: Any changes or modifications to this equipment not expressly approved by USAutomatic could void the user’s authority to operate this equipment.

INFORMAZZJONI TA' KUNTATT

• www.usautomaticgateopeners.com
• (888)-378-1170
• sales@usautomaticgateopeners.com