Think Node M6 Meshtastic Device

Manwal għall-Utent

Informazzjoni dwar is-Sigurtà tal-Prodott

Twissija tan-Nar: Observe safety instructions and compliant operation, otherwise it may cause fire, electric shock or other injuries.
Twissija ta' Fgar: The product or gadgets inside the package present a risk of causing or contributing to asphyxiation.

The product has some waterproof function and is suitable for outdoor use. However, the product does not support underwater use, in order to prevent electric shock exposure:

• Do not immerse the solar panel underwater;
• Do not spill food or drink on the solar panel;
• Do not put oil or corrosive liquid in contact with the solar panel;
• Do not place the solar panel in an extremely humid environment,
• Do not use external heating equipment to dry the solar panel;
• Do not use a high-pressure water gun to rinse the solar panel:
• Do not use or touch the solar panel in lightning or thunderstorms;
• If your solar panel is damaged or cracked, stop using it immediately.
• Please use the accessories supplied with the product or those designed specifically for this product. The use of other third-party accessories may affect the performance of the device.
• If you want to use third-party accessories, please be sure to read all product warnings before using them.

For information on compatibility of your device, please consult our information channels or contact our specialized technicians.

Preparazzjoni għall-installazzjoni

Please refer to the following recommendations before installation, so that the solar panels can work more efficiently.

a: Choose a suitable orientation for installation.
If you are in the Northern Hemisphere, install the solar panels facing south,

If you are in the Southern Hemisphere, install the solar panel facing north.

b: Do not install the solar panels in an environment where there are objects covering the solar panels, so as not to affect the conversion of the solar panels.

Installazzjoni ta' Solar Panels

a: Bracket fixing
Select the appropriate tool to securely fasten the bracket to the wall at the desired installation location.

b: Mating solar panels to racking.

Deskrizzjoni tal-Funzjoni

Deskrizzjoni tal-buttuna

Isem	Metodu ta' Operazzjoni	Funzjoni
Buttuna tal-Funzjoni	Ikklikkja darbtejn	Update node/device location information
	Ikklikkja bi tlieta	Turn GPS on/off
	Press and hold for 5 seconds.	Ixgħel/itfi l-apparat
Irrisettja Buttuna	Klikk waħda	Reset the device; a restart is required

Deskrizzjoni tad-Dawl Indikatur

Isem	Status	Deskrizzjoni	Blink Frequency
PWR (Aħmar)	Qawwa Mixgħul	The red light stays on for 10 seconds.
	Qawwa Mitfi	It blinks 5 times.	Fast blink(1 Hz).
	Indikatur tal-iċċarġjar	When the device is charging via USB or solar power (when exposed to light), the indicator light stays on.
	Twissija Batterija Baxxa	A low battery warning is triggered when the power is s 3.3V.	Slow blink (0.5 Hz).
DATA (Blue)	Sending /Receiving Data	When the device is sending or receiving LoRa data, it blinks twice.	Fast blink (1 Hz).

Speċifikazzjonijiet tal-Prodott

Module: nRFLR1262
Bluetooth: Bluetooth Low Energy/Bluetooth 5.4
LoRa: US 915MHz/EU 868MHz (External Antenna)
Tip ta 'batterija: 18650 Li-ion Battery
Kapaċità tal-batterija: 7000mAh
Dimensions: 210 x 156 x 42mm (excluding antenna & bracket)
Piż Nett: 533.1g
Klassifikazzjoni tal-Protezzjoni: IP65
Temperatura operattiva: -20 ° C sa + 60 ° C
Temperatura tal-Ħażna: -30°C sa +70°C
Main Board Input: 5V1A
Solar Panel Output: Rated power 6W output

Lista tal-Ippakkjar

Solar Panel (M6) x 1
Parentesi x 1
Screw Pack 1
USB-A to USB-C × 1
LoRa Antenna x 1
GPS Antenna x 1
Manwal għall-Utent x 1

Mistoqsijiet Frekwenti

1: Why do solar panels charge slower and slower after a period of normal use?

-Solar panels are suitable for outdoor installation, after al period of time the surface of solar panels may be covered with dust, debris, etc. will affect the efficiency of solar energy conversion, Please clean the surface of the solar panel regularly.

2: Are solar panel products waterproof?

-The equipment is suitable for outdoor, is with certain waterproof function, but not suitable for use underwater, also can not use high-pressure water gun rinse equipment, avoid some corrosive liquid or material touch,

3: What is the purpose of these two sensor interfaces?

-Two SP11 model sensor interfaces are reserved, allowing users to connect external sensors for UART and IIC sensor communication.

Nota: After using the sensor interface and USB interface, please remember to cover the waterproof cap to prevent water from entering the device and affecting its use.

Appoġġ għall-Klijent

Jekk għandek xi mistoqsijiet, l-appoġġ għall-klijent huwa dejjem joqgħod.
info@elecrow.com
techsupport@elecrow.com
Għal aktar dettalji tekniċi, jekk jogħġbok żur is-sit rilevanti webpaġna.

TWISSIJA TAL-FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
Kwalunkwe tibdil jew modifika mhux approvata espressament mill-parti responsabbli għall-konformità tista' tħassar l-awtorità tal-utent biex iħaddem it-tagħmir.
NOTA: Dan it-tagħmir ġie ttestjat u nstab li jikkonforma mal-limiti għal apparat diġitali tal-Klassi B, skont il-Parti 15 tar-Regoli tal-FCC.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Orjenta mill-ġdid jew iċċaqlaq l-antenna li tirċievi.

• Żid is-separazzjoni bejn it-tagħmir u r-riċevitur.
• Qabbad it-tagħmir fi żbokk fuq ċirkwit differenti minn dak li miegħu huwa konness ir-riċevitur.
• Ikkonsulta lin-negozjant jew tekniku tar-radju/TV b'esperjenza għall-għajnuna.
• To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Manufacturer: Elecrow
Magħmul fiċ-Ċina

Dokumenti / Riżorsi

ThinkNode M6 Meshtastic Device [pdfManwal tal-Utent M6, M6 Meshtastic Device, Meshtastic Device, Device

Referenzi

• Manwal għall-Utent