TECH F21 Mini Printer

Speċifikazzjonijiet

• Teknoloġija tal-Istampar: Thermal printing (inkless)
• Tip ta' Stampa: Iswed u abjad
• Tip ta' Karta: Rombli tal-karti termali
• Wisa' tal-Karta: 57 mm
• Riżoluzzjoni tal-Istampar: 203 DPI
• Veloċità tal-Istampar: Approx. 10–15 mm/s
• Konnettività: Bluetooth
• Apparati Kompatibbli: Android, iOS
• Apps appoġġjati: Dedicated mobile printing app (varies by region)
• Tip ta 'batterija: Batterija tal-litju rikarikabbli
• Kapaċità tal-batterija: ~1000 mAh
• Metodu tal-Iċċarġjar: USB (Type-C or Micro-USB, model dependent)
• Vol Operattivtage: 5V
• Materjal: plastik ABS
• Daqs: Compact / portable
• Piż: Lightweight (approx. 150–200 g)
• Supported Printing: Text, images, labels, QR codes, barcodes

Issolvi l-problemi

Il-printer mhux qed jixgħel

• Kun żgur li l-batterija tkun iċċarġjata.
• Ipprova kejbil USB differenti jew sors ta 'enerġija.
• Press and hold the power button for 3–5 seconds.

Il-Bluetooth mhux qed jgħaqqad

• Turn Bluetooth OFF and ON again on your phone.
• Ensure the printer is not connected to another device.
• Reinstall or update the printer app.
• Keep the printer within 1–2 meters during pairing.

Blank or unclear printing

• Check that thermal paper is loaded correctly (print side facing out).
• Use compatible thermal paper only.
• Clean the print head gently.
• Ensure battery level is sufficient.

Paper not feeding properly

• Reinstall the paper roll correctly.
• Avoid overloading the paper compartment.
• Remove jammed paper carefully.

App ma tirrispondix

• Agħlaq u terġa' tiftaħ l-app.
• Check app permissions (Bluetooth, storage).
• Ibda mill-ġdid it-telefon tiegħek.

Kura u Manutenzjoni

• Użu only recommended thermal paper to avoid print head damage.
• Keep the printer dry and away from heat or direct sunlight.
• Clean the print head periodically with a soft, dry cloth.
• Do not pull paper forcefully while printing.
• Charge the battery at least once every 2–3 months if not in use.
• Avoid dropping or applying pressure to the device.
• Store in a dust-free environment when not in use.

Introduzzjoni tal-Prodott

1.1 Lista tal-Ippakkjar

O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.

1.2 Istruzzjoni tal-Partijiet tal-Istampatur

Nibdew

2.1 Niżżel l-App
Fittex għal the “FaithTag” app on App Store@ or Google PlayTM for download and installation.

2.2 Gwida għall-Utent
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”

Biex tixgħel l-istampatur, agħfas fit-tul il-Butun tal-Enerġija għal tliet sekondi sakemm id-Dawl tal-Indikatur ikun mixgħul.
Open the “FaithTag”App.
Agħti permessi.
Ikklikkja [Qabbad] fil-parti ta' fuq.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
L-istampar tlesta.
Qargħ it-tikketta tul il-Ħruġ tal-Karta.
Neħħi l-kisi ta' wara.
Waħħal it-tikketta fuq wiċċ niexef u ċatt.

L-interface tas-softwer huwa għal referenza biss. Jekk jogħġbok irreferi għall-paġna operattiva attwali għal informazzjoni preċiża.

Tissostitwixxi r-Roll tal-Karta

Oħroġ romblu tal-karta ġdid fjamant.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Pull movable damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Insert one section of the spindle into the paper roll to be installed.
Erġa' installa l-Movable Damper u imbottaha sat-tarf tar-romblu tal-karta.
Neħħi l-Stiker Kontra l-Laxkar mir-romblu tal-karta.
Poġġi r-roll tal-karta fil-Kompartiment tal-Karta.
Iġbed ir-Romblu tal-Karta 'l barra sakemm jestendi lil hinn mill-Islott tal-Output tal-Karta, u mbagħad agħlaq il-Flip Cover.

Istruzzjonijiet tas-Sigurtà

5.1 Istruzzjonijiet dwar il-Cutter Manwali u r-Ras tal-Istampar

Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.

5.2 Istruzzjonijiet għall-Iċċarġjar
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.

5.3 Tindif u Manutenzjoni
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Jekk tiltaqa' ma' problemi bħal linji vojta, stampar imċajpar, jew karattri neqsin, dan jista' jkun ikkawżat minn ħmieġ fuq ir-Ras tal-Istampar. Jekk jogħġbok segwi dawn il-passi:
If you have just finished printing, wait for at least 30 minutes for the Print

01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.

Informazzjoni lill-Utent

6.1 TWISSIJA FCC
Dan l-apparat jikkonforma mal-parti 15 tar-Regoli tal-FCC.

Operation is subject to the ollowing two conditions:

(1) dan l-apparat ma jistax jikkawża interferenza ta 'ħsara, u
(2) dan l-apparat għandu jaċċetta kwalunkwe interferenza riċevuta, inkluża interferenza li tista 'tikkawża tħaddim mhux mixtieq.

Kwalunkwe tibdil jew modifika mhux approvata espressament mill-parti responsabbli għall-konformità tista' tħassar l-awtorità tal-utent biex iħaddem it-tagħmir.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.

L-apparat ġie evalwat biex jissodisfa dikjarazzjoni ġenerali ta' espożizzjoni RF.
L-apparat jista 'jintuża f'kundizzjoni ta' espożizzjoni portabbli mingħajr restrizzjoni.

6.2 AVVIŻ TAL-ISED (Kanada)
– Ingliż:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).

It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin:

(1) Dan l-apparat ma jistax jikkawża interferenza.
(2) Dan l-apparat għandu jaċċetta kwalunkwe interferenza, inkluża interferenza li tista 'tikkawża tħaddim mhux mixtieq tal-apparat.

Dikjarazzjoni ta' espożizzjoni IC RF:
L-apparat ġie evalwat biex jissodisfa r-rekwiżit ġenerali tal-espożizzjoni tal-IC RF. L-apparat jista 'jintuża f'kundizzjoni ta' espożizzjoni portabbli mingħajr restrizzjoni.

WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.

Noti Speċjali
Il-kumpanija tassumi r-responsabbiltà sħiħa għar-reviżjoni u l-ispjegazzjoni ta’ dan il-manwal, filwaqt li teżerċita l-akbar diliġenza biex tiggarantixxi l-eżattezza tiegħu.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.

 

Dokumenti / Riżorsi

TECH F21 Mini Printer [pdfGwida għall-Utent 2BSMY-F21, 2BSMY-F21, F21 Mini Printer, F21, Mini Printer, Printer

Referenzi

• Manwal għall-Utent