Manwali u Gwidi għall-Utent ta' Cell2

Manwali tal-utent, gwidi tas-setup, għajnuna għas-soluzzjoni tal-problemi, u informazzjoni dwar it-tiswija għall-prodotti Cell2.

Suġġeriment: inkludi n-numru sħiħ tal-mudell stampat fuq it-tikketta taċ-Cell2 tiegħek għall-aħjar tqabbil.

Manwali ta' Cell2

L-aħħar postijiet, manwali dehru, u manwali marbuta mal-bejjiegħ bl-imnut għal din il-marka tag.

cell2 B18 LED Beacon Manwal għall-Utent

cell2 B18 LED Beacon Manwal għall-Utent

26 ta’ Frar, 2023
cell2 B18 LED Beacon INSTRUCTION WIRING RED: To +VDC BLACK: To Chassis Ground(-) FLASH PATTERN SELECTION Open: Twist the dome lens counter clockwise O , then lift the dome lens to open. Change: While activating Warning Mode, momentarily push the…
Marka: Cell2
Cell2 Microbar EXD Mini LED Lightbars Manwal għall-Utent

Cell2 Microbar EXD Mini LED Lightbars Manwal għall-Utent

26 ta’ Frar, 2023
Cell2 Microbar EXD Mini LED Lightbars Auto-Dimming Light Sensor Automatically activate or deactivate the Low-Power operation. Application to Colour 1. IMPORTANT: Do not cover the light sensor or place the minibar under vehicle shad (Auto-dimming may not function properly). 2-Button…
Marka: Cell2
Cell2 MINI-FALCON 1-Bolt Mount Minibar Manwal għall-Utent

Cell2 MINI-FALCON 1-Bolt Mount Minibar Manwal għall-Utent

26 ta’ Frar, 2023
Cell2 MINI-FALCON 1-Bolt Mount Minibar WIRING/OPERATION 4-Wire Cable 2-Button Cigar Plug FLASH PATTERNS (Split) Left-half alternating Right-half. To maintain ECE R65 compliance use flash pattern 1 (Double) Activating the dim function will invalidate the R65 approval. INSTALLATION (Actual Mounting Kit…
Marka: Cell2
cell2 LP4 LED PAD Manwal għall-Utent

cell2 LP4 LED PAD Manwal għall-Utent

26 ta’ Frar, 2023
cell2 LP4 LED PAD User Surface Mount (All heads should be set to the same pattern) NOTE: To obtain optimum adhesion, the surfaces must be clean, dry and well unified For Simultaneous or Alternating Flash Apply +VDC to WHITE and…
Marka: Cell2
cell2 86-M4310-0011.0 Manwal ta' Istruzzjoni Mini Lighthead

cell2 86-M4310-0011.0 Manwal ta' Istruzzjoni Mini Lighthead

26 ta’ Frar, 2023
cell2 86-M4310-0011.0 Mini Lighthead Instruction Manual Surface Mount For Synchronization: Connect BROWN wires of all heads together for synchronization (All heads should be set at the same Flash Pattern) For Simultaneous or Alternating Flash: Apply +VDC WHITE and BROWN wires…
Marka: Cell2
cell2 86-B02310-0001.1 Manwal għall-Utent tal-LED BEACON

cell2 86-B02310-0001.1 Manwal għall-Utent tal-LED BEACON

26 ta’ Frar, 2023
cell2 86-B02310-0001.1 LED BEACON WIRING OPERATION Flash Pattern Selection While Warning Mode has been activated, momentarily apply WHITE wire to +VDC: Once for next pattern Quick 3 times to FP#1 Simultaneous or Alternating Synchronization Setting Enter SETTING MODE by powering…
Marka: Cell2
cell2 LP26 LED PAD Istruzzjonijiet

cell2 LP26 LED PAD Istruzzjonijiet

26 ta’ Frar, 2023
cell2 LP26 LED PAD WIRING CAUTION: Ensure that the mounting surface is evenly flat; mounting this light head on non-flat surfaces may result in bending and/or water ingress. NOTE: When using an adhesive mount, ensure that the mounting surface is…
Marka: Cell2
cell2 B16 LED Beacon Manwal għall-Utent

cell2 B16 LED Beacon Manwal għall-Utent

25 ta’ Frar, 2023
cell2 B16 LED Beacon User Manual OPERATION RED: To +VDC BLACK: To Chassis Ground (-) FLASH PATTERN SELECTION Open Twist the dome lens counter clockwise , then lift the dome lens to open. Change Momentarily push the red button to…
Marka: Cell2