Sunell Dome SN-IPV8046UAR-Z IP Camera

Speċifikazzjonijiet

• Prodott: Kamera IP
• Firmware Upgrade Method: Tools Software Preparation or Camera Web Interface
• Network Connectivity: PC and camera must be on the same network segment

Istruzzjonijiet għall-Użu tal-Prodott

Using Tools Software Preparation:

1. Download the correct firmware for your camera.
2. Download the Tools software.
3. Ensure that the PC and the camera are on the same network \segment.

Proċeduri:

1. Open the Tools software and click Search settings.
2. Input the camera password in the Password field and click OK.
3. Click the Search button. If the camera status is ‘Online’, proceed.
4. Click the Firmware Upgrade icon.
5. Select the camera/s you want to upgrade.
6. Sib il-firmware file by clicking Choose File.
7. Optionally tick Reset to restore default settings after upgrade. Click Upgrade to proceed.
8. Wait for the upgrade to complete. Do not close the tool.
9. Upon successful upgrade, ‘Upgrade success’ will display under Upgrade status.

Bl-użu tal-Kamera Web Interface:

1. Log in to the IP camera’s web interface and navigate to Camera Maintenance menu, then Update/Upgrade.
2. Agħżel il- web aġġornament file.
3. Click Update/Upgrade.
4. Do not close or refresh the web browser until the upgrade is completed.

FAQ

Q: What should I do if the Tools software shows 'Login failed' during the upgrade process?

A: If you encounter 'Login failed', it means the password entered is incorrect. Verify the password and try again. If issues persist, consult customer support.

Q: Can I update multiple cameras simultaneously using the Tools software?

A: Yes, you can select multiple cameras to upgrade at once using the Tools software. Ensure all selected cameras are compatible with the firmware version.

"`

How to upgrade the firmware of an IP camera
There are multiple ways to update an IP camera. Follow the appropriate method below based on your preferred update approach. Using the Tools Software Preparation:
1. Download the correct firmware for your camera. 2. Download the Tools software. 3. Ensure that the PC and the camera are on the same network segment. Procedures: 1. Open the Tools software and click Search settings.
1|Paġna

2. Input the camera password in the Password field. Then, click OK. 3. Click the Search button. If the entered password is correct, the camera status will be `Online’. If
it says `Login failed’, it cannot be updated using the tool.
2|Paġna

4. Click the Firmware Upgrade icon.
3|Paġna

5. Select the camera/s that you would like to upgrade. 6. Find the firmware file by clicking Choose File.
4|Paġna

7. You may also tick the box beside Reset to reset the camera to the default settings after the upgrade. Click Upgrade to proceed with upgrading the camera.
8. After the firmware has been uploaded to the camera, the upgrade will proceed. Do not close the tool until the update is completed.
9. Once the upgrade is successful, you will see ‘Upgrade success’ under Upgrade status on the tool.
5|Paġna

Uża l-kamera web interface 1. Log in to the IP cameras web interface and go to the Camera Maintenance menu. Go to Update/Upgrade. V3.6 Update Page
V5.0 Upgrade Page
2. Agħżel il- web aġġornament file. 3. Click Update/Upgrade. 4. Don’t close or refresh web browser until the upgrade is completed.

Login u Logout

Use a supported browser such as Microsoft Edge, Chrome, or Firefox to access the web
interface. Other browsers may result in limited functionality.
Idħol
Step 1 Open THE Chrome browser.
Step 2 Enter the IP address of the IP camera in the address bar (default: 192.168.0.120) and
agħfas Enter.
Step 3 On first login: You will be prompted to create a password. After setting the password,
you will be directed to the login page.
Note: DHCP is enabled by default. Use the provided tool to search for the camera IP. Default IP:
192.168.0.120.
Important: After changing the password, wait at least 3 minutes before powering off the device to ensure
the change is saved. Alternatively, log in again with the new password to verify.
• You can change the system language on the login page.
• Click Login to access the homepage.
Quick Overview
IPC
Web Gwida tal-Operazzjoni
2 Issue V1.0 (2025-05-28)
Oħloq password
Step 1 Enter your username and password to access the system, as shown in Figure 1-2.
• Default username: admin
• Password must be created during initial login.
IPC
Web Operation Guide Quick Overview
Issue V1.0 (2025-05-28) 3
Il-paġna tal-login
Note: DHCP is enabled by default. Use the provided tool to search for the camera IP. Default IP:
192.168.0.120.
Important: After changing the password, wait at least 3 minutes before powering off the device to ensure
the change is saved. Alternatively, log in again with the new password to verify.
• You can change the system language on the login page.
Step 2 Click Login to access the homepage.
Iffirma
Click Sign Out in the upper right corner to return to login screen.
Quick Overview
IPC
Web Gwida tal-Operazzjoni
4 Issue V1.0 (2025-05-28)
Ibdel il-Password
Deskrizzjoni
Biex tibdel il-password tiegħek:
• Click your username in the upper right corner and select Change Password.
• Or go to Setting > System > Change Password.
Change the default password page
Proċedura
Step 1 Enter the old password, new password, and confirm the new password.
Pass 2 Ikklikkja OK.
o A message like “Change your password success!” confirms the change.
o If the password change fails, a tip or error will be displayed (e.g., “Password must be at least 8
characters”).
Step 3 It is recommended to wait three minutes before restarting the device after changing the password.
Step 4 Click OK to return to the login page.
Homepage Layout
The homepage allows you to:
• View vidjo f'ħin reali
• Monitor alarms and faults
• Configure system settings
• Change your password
• Log out of the system
Refer to Figure 1-4 for the layout and Table 1-1 for descriptions.
IPC
Web Operation Guide Quick OverviewIssue V1.0 (2025-05-28) 5Homepage layout
Interfaċċja PTZ
Table 1-1 Elements on the homepage
No. Element Description
1 Ħaj View Displays real-time video streams.
2 Playback Access recorded videos (requires SD card or NAS withrecordings).
3 IVS setting Configure AI multi-target features and intelligent analysis(e.g., intrusion, smart motion, single line crossing, double\line crossing, multi-loitering, Wrong-Way, generalparameters), people counting).
Quick Overview
IPC
Web Gwida tal-Operazzjoni
6 Issue V1.0 (2025-05-28)
No. Element Description
4 Konfigurazzjoni
·Set parameters for Quick Start, System, Network,Audio/Video, Image, Event, and Storage.
5 About the intercom function.
6 Ikklikkja biex view alarm alerts.
7 Displays SD card video backup and download progress.
8 Sign out, change password, view current user.
9 Zoom +/ zoom – (adjust zoom level).
10 Iris +/ iris – (adjust iris value).
11 Near focus /far focus
12 Fokus awtomatiku
13 Image Set brightness, saturation, contrast and sharpness.
14 Window scale, Adjust display scale for live video.
15 View live video in full-screen mode.
16 Switch between available stream modes (up to 3 depending on model). 17
Pause/Start or Stop live video playback.
18 Enable or disable audio output.
19 Two-way audio. Open or close intercom (the computer should be plugged in microphone prior).
20 Click the icon to snapshot the video and save the images to the specified location.
21 Record the video and save the file sal-post speċifikat.
22 View AI-detected targets (e.g., face, vehicle, human body).
23 Target frame: Show detection box around targets. Intelligent marking: Display IVS detection areas during live view.
IPC
Web Operation Guide Quick Overview
Issue V1.0 (2025-05-28) 7
No. Element Description 24 Display resolution, frame rate, bit rate, encoding type. 25 I/O output, control the I/O alarm output manually. Click to open alarm or close the alarm 26 Open or close the flashing light manually (available only on special models).
About the intercom function
Note: The following instructions apply only when using two-way audio (camera) in Chrome over HTTP (insecure origin). For HTTPS connections, two-way audio is supported by all major browsers. If using Chrome on HTTP, follow these steps to enable the intercom function:
1. Ensure your computer is connected to a working microphone.
2. Open Chrome and navigate to: chrome://flags/#unsafely-treat-insecure-origin-as-secure
3. Enable the flag: “Insecure origins treated as secure.”
4. In the input box that appears, enter the IP addresses of the cameras you want to allow, separated by commas.
o Eżample: http://192.168.0.123, http://192.168.1.250:8045
5. Click outside the input box to save your changes.
6. Relaunch Chrome for the changes to take effect.
Quick Overview
IPC
Web Gwida tal-Operazzjoni
8 Issue V1.0 (2025-05-28) AI multi object interface Playback
Biex terġa 'view irreġistrat footage:
1. Click Playback on the web interface.
2. If an SD card is installed and enabled, recordings will be available.Refer to Figure 1-8 for layout and controls. Playback page
IPC
Web Operation Guide Quick Overview
Issue V1.0 (2025-05-28) 9
Table 1-2 Playback function
No. Element Description
1 Channel Displays available video channels.
2 Calender \Green dots indicate recorded days.
3 The green timeline represents scheduled recording and the red timeline represents alarm recording. The types of alarm recording varies according to model performance.
4 Play one channel’s recording.
5 Play two channels’ recording.
6 Play four channels’ recording.
7 Adjust playback scale.
8 View recording in full-screen mode.
9 Pause or resume playback.
10 Enable or disable audio playback.
11 Capture screenshots from the recording and save the
images to a specified location.
12 Fast Forward, 1/16X, 1/8 X, 1/4 X, 1/2 X, 1 X, 2 X, 4
X, 8 X
Quick Overview
IPC
Web Gwida tal-Operazzjoni
10 Issue V1.0 (2025-05-28) 13 Click to begin video backup; select the duration; click again to stop. A dialog will prompt you to save or cancel. The pop-up window of tip as shown in Figure 1-9, click the save to save the video. Click Cancel to abandon.
Click the backup \list to show the detail information.
14 Ħin view options: 1h, 6h, 12h, 24h. Record backup tip
IVS Setting
Click IVS to access the IVS configuration page. You can configure:
• Deep learning settings
• Intelligent video analytics
• Behavior analysis features
Refer to Figure 1-10 for the IVS setting layout.
IPC
Web Operation Guide Quick Overview
Issue V1.0 (2025-05-28) 11
IVS setting page
The IVS features vary by device model. Refer to the product specification for supported functionality

Netwerk Lokali

Deskrizzjoni
The local network settings include the following parameters:
• IP protocol
• Indirizz IP
• Maskra tas-subnet
• Default gateway
• Dynamic Host Configuration Protocol (DHCP)
• Preferred Domain Name System (DNS) server
• Alternate DNS server
• MTU (Maximum Transmission Unit)
Proċedura
1. Navigate to Setting > Quick Start > Local Network. The Local Network page is displayed (see
Figura 2-1).
2. Configure the parameters, as shown in Figure 2-1.

Utent Online

Proċedura
Step 1 Navigate to Setting > System > User > Online User. The Online User page is
displayed, as shown in Figure 3-6.
Pass 2 View all users currently connected to the system in real time.

Żomm l-Apparat
Reboot Apparat
Deskrizzjoni
Use this feature to reboot the device in scenarios including, but not limited to:
• Device parameters have been configured incorrectly, causing improper operation.
• A parameter reset is needed for the changes to take effect.
• Remote reboot is required for maintenance or troubleshooting.
Proċedura
Step 1 Navigate to Setting > System > Maintenance > Reboot. The Camera Maintenance page is displayed as shown in Figure 3-10. Reboot device page
Step 2 Click Reboot.
• A confirmation message appears: “Are you sure to restart?”
• Click OK to proceed.
Step 3 The device will restart successfully within approximately five minutes. Auto Reboot Configuration: You can also configure the device to reboot automatically at scheduled intervals. IPC Web Operation Guide System Settings
Issue V1.0 (2025-05-28) 49
Step 1 Enable Auto Reboot by checking the appropriate option.
Step 2 Choose the desired reboot interval from the drop-down list:
• Every Day
• Every Week
• Every Month
Camera auto restart
Step 3 Click Apply. The auto reboot schedule will take effect, and settings will be saved.
Upgrade the Software Package Description You can upgrade the device software package through the web interface. This process ensures the device runs the latest version with improved features or resolved issues.
ProcedureStep 1 Navigate to Setting > System > Maintenance > Upgrade. The Upgrade page is displayed.
Issettjar tas-Sistema
IPC
Web Gwida tal-Operazzjoni
50 Issue V1.0 (2025-05-28)
Aġġornament file
Pass 2 Ikklikkja Agħżel File to browse and choose the appropriate upgrade file.
Step 3 Click Update to begin the upgrade process..
If the message “Updating, please wait a few minutes, and do not close the browser” is
murija:
• The upgrade is in progress.
• The device will automatically reboot after the update completes.
If another message is displayed, ensure you have selected the correct upgrade package and
erġa' pprova.
Do not power off the camera during the upgrade process.
Power failure during an upgrade may result in device malfunction.
Restore Device to Factory Settings
Deskrizzjoni
You can restore the device to its factory default settings. This feature is recommended in the
xenarji li ġejjin:
• The device configuration is incorrect, causing operational issues
IPC
Web Operation Guide System Settings
Issue V1.0 (2025-05-28) 51
• You want to reset all parameters
• A clean factory default state is required for troubleshooting
After clicking Restore, all configuration settings will be reset to factory defaults. You may choose whether or not to retain the current IP address. Use function carefully. Procedure
Step 1 Navigate to Setting > System > Maintenance > Restore. The Restore page is displayed.
Restore device
Step 2 Click Restore. The message “Are you sure to restore?” is displayed.
Step 3 Click OK. The device begins restoring to its factory default settings. After the process completes, the device will reboot with factory defaults applied. Export / Import Configuration
Description This feature allows you to back up the current configuration and restore it later. You can export the settings to a local hard drive and import the same configuration to: System Settings
IPC
Web Gwida tal-Operazzjoni
52 Issue V1.0 (2025-05-28)
• The current device
• Other cameras of the same model
Il-konfigurazzjoni file is saved as config.bin. Procedure
Esportazzjoni Konfigurazzjoni
Step 1 Navigate to Setting > System > Maintenance > Import/Export Configuration.
The Export / Import Configuration page is displayed (see Figure 3-14).
Step 2 Under Export Configuration:
o Enter the password.
o Click Export.
Step 3 A message will appear: “Export Configuration File — Downloading, Please Wait!”
Il-konfigurazzjoni file will be downloaded to your local system.
Export / Import Configuration page
Import Configuration Step 1 Under Import Configuration: o Enter the password. IPC Web Operation Guide System Settings Issue V1.0 (2025-05-28) 53
o Click Select File, then browse and select the config.bin file from your local drive.
o Click Upload to begin the import process.
System Settings IPC Web Gwida tal-Operazzjoni
54 Issue V1.0 (2025-05-28) Configure Security IP Filter Description The IP Filter function allows you to control access to the device based on IP address ranges. You can specify whether to allow or deny access to certain IP segments using whitelist or blacklist rules. Procedure
Step 1 Go to Setting > System > Security > IP Filter.
The IP Filter page is displayed (see Figure 3-15).
Step 2 Click the toggle switch to enable IP Filter.
Step 3 Configure the parameters listed in Table 3-4. IP filter pag

Dokumenti / Riżorsi

Sunell Dome IP Camera [pdfGwida għall-Utent Dome IP Camera, IP Camera, Camera

Referenzi

• Manwal għall-Utent