Solutions MS-TP Programmable Touch Panel
Avviż dwar id-drittijiet tal-awtur
Il-kontenut kollu ta’ dan il-manwal, li l-awtur tiegħu jappartjeni lill-korporazzjoni tagħna ma jistax jiġi kklonat, ikkupjat jew tradott mingħajr il-permess tal-kumpanija.
L-ispeċifikazzjonijiet tal-prodott u l-informazzjoni li ssemmew f'dan id-dokument huma għal referenza biss. Nistgħu nbiddlu, inħassru jew naġġornaw kwalunkwe kontenut fi kwalunkwe ħin u mingħajr avviż minn qabel.
Avviż tal-FCC
Dan il-prodott jikkonforma mal-Parti 15 tar-Regoli tal-FCC. L-operazzjoni hija soġġetta għaż-żewġ kundizzjonijiet li ġejjin:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Dan il-prodott ġie ttestjat u nstab li jikkonforma mal-limiti għal apparat diġitali tal-Klassi A, skont il-Parti 15 tar-Regoli tal-FCC. Dawn il-limiti huma mfassla biex jipprovdu protezzjoni raġonevoli kontra interferenza dannuża f'installazzjoni residenzjali. Dan it-tagħmir jiġġenera użi u jista 'jirradja enerġija ta' frekwenza tar-radju u, jekk mhux installat u użat skont l-istruzzjonijiet, jista 'jikkawża interferenza ta' ħsara għall-komunikazzjonijiet bir-radju. Madankollu, m'hemm l-ebda garanzija li l-interferenza ma sseħħx f'installazzjoni partikolari. Jekk dan it-tagħmir jikkawża interferenza ta' ħsara għar-riċezzjoni tar-radju jew tat-televiżjoni, li tista' tiġi determinata billi jintefa u jinxtegħel it-tagħmir, l-utent huwa mħeġġeġ jipprova jikkoreġi l-interferenza b'waħda jew aktar mill-miżuri li ġejjin:
- Orjenta mill-ġdid jew iċċaqlaq l-antenna li tirċievi.
- Żid is-separazzjoni bejn it-tagħmir u r-riċevitur.
- Qabbad it-tagħmir fi żbokk fuq ċirkwit differenti minn dak li miegħu huwa konness ir-riċevitur.
- Ikkonsulta lin-negozjant jew tekniku b'esperjenza tar-radju/televiżjoni għall-għajnuna.
Klassi A ITE
L-ITE tal-Klassi A hija kategorija tal-ITE l-oħra kollha li tissodisfa l-limiti tal-ITE tal-klassi A iżda mhux il-limiti tal-ITE tal-klassi B. Tali tagħmir m'għandux ikun ristrett fil-bejgħ tiegħu iżda t-twissija li ġejja għandha tkun inkluża fl-istruzzjonijiet għall-użu:
Twissija
It-tħaddim ta' dan it-tagħmir f'ambjent residenzjali jista' jikkawża interferenza tar-radju.
EC Compliance Statement
(Klassi A)
Dan il-prodott huwa hawnhekk ikkonfermat li jikkonforma mar-rekwiżiti stabbiliti fid-Direttivi tal-Kunsill dwar l-Approssimazzjoni tal-liġijiet tal-Istati Membri relatati mad-Direttiva dwar il-Kompatibbiltà Elettromanjetika 2014/30/UE.
Protezzjoni minn Surge
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Attenzjoni
The network cable connection method required for this product is direct connection. Please do not cross-connect.
Introduzzjoni
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Karatteristiċi Ewlenin
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Konformi mal-protokolli tal-komunikazzjoni tan-netwerk standard tal-industrija (TCP/IP, Http, UDP, Websokit)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Kontenut tal-Pakkett
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- 1x Wall Mounting Bracket
- 2x Bracket Fixing Screw
- 1x Manwal għall-Utent
Speċifikazzjonijiet
| Tekniku | |
| CPU: | ARM Cortex-A55 1.8GHz |
| Sistema operattiva: | Android 11 |
| RAM: | 4GB DDR4 RAM |
| Memorja Flash: | 32GB EMMC Flash |
| Riżoluzzjoni: | 720 * 720 |
| Tip ta' touch: | Touch Screen Capacitive |
| Protezzjoni ESD: | IEC 61000-4-2: ± 8kV (iskarigu ta 'l-arja) & ± 4kV (iskarigu ta' kuntatt) |
| Konnessjoni | |
| RS232: | Konnetturi Phoenix 1x 3-pin |
| LAN/POE: | 1x Standard 10M/100M/1000M Ethernet port RJ45, li jappoġġja l-funzjoni POE |
| QAWWA: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| Mekkaniċi | |
| Djar: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| Kulur: | Front Pane: Back; Frame: Gray Rear Case: White |
| Dimensjonijiet: | 86mm (L) x 86mm (W) x 44mm (D) |
| Piż: | 192g |
| Provvista ta' enerġija: | 24V DC/1A jew POE |
| Konsum tal-enerġija: | 5W |
| Temperatura operattiva: | 0°C ~ 40°C / 32°F ~ 104°F |
| Temperatura tal-ħażna: | -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C |
| Umdità operattiva: | 20% ~ 80% (umdità relattiva, mingħajr kondensazzjoni) |
| Umdità tal-ħażna: | 10% ~ 90% (umdità relattiva, mingħajr kondensazzjoni) |
Kontrolli tat-Tħaddim u Funzjonijiet
| Numru | Isem | Deskrizzjoni tal-Funzjoni |
| 1 | Touch screen | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
buttuna RESET |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | Buttuna POWER | Użat għall-iskrin mitfi jew wake-up. |
| 4 | Port USB | Port mikro USB. Il-port riservat għad-debugging tas-sistema. |
|
5 |
Port LAN/PoE |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | Port POWER | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
Port RS232 |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Istruzzjonijiet għall-Immuntar
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
Pass 1: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
Pass 2: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
FAQ
Q: Can I use this touch panel without surge protection?
Q: What type of network connection is required for this product?
Dokumenti / Riżorsi
 | MS-TP Programmable Touch Panel |
Referenzi
- Mument wieħed, jekk jogħġbok...www.m4sol.com
- Manwal għall-Utentmanual.tools