SMARTOP TECH FP31 Mini Printer User Guide

SMARTOP TECH FP31 Mini Printer

Speċifikazzjonijiet

• Isem tal-Prodott: Mini Printer
• Konnettività: Bluetooth (via Faith Tag app)
• Port tal-Iċċarġjar: Tip-Ċ
• Input ta' Enerġija: DC 5V (via Type-C port)
• Tip ta' Karta: Self-adhesive paper roll
• Sigurtà: FCC Compliant, IC RF Exposure Compliant

Istruzzjonijiet għall-Użu tal-Prodott

• Nibdew
  • Niżżel l-App: Fittex għal the ‘Faith Tag’ app on the App Store or Google Play.
• Iċċarġja l-Printer:
  • Prepare your own DC 5V power adapter with a Type-C port.
  • Insert the Type-C end of the USB cable into the printer’s Type-C charger port.
  • Plug the other end of the Type-C cable into the Type-C port of your power adapter.
  • The indicator light will flash slowly with a white light while charging.
  • Charge for at least 30 minutes for quick use, or 2 hours for a full charge.
  • When fully charged, the indicator light will stay white (if turned on) or go out (if turned off).
  • Unplug the charger promptly once fully charged. Avoid using the printer while charging, as it may reduce charging speed, compromise print quality, and shorten battery life.
• Loading/Replacing the Paper Roll
  • Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment.
  • Push the Cover Open Button towards the arrow to open the Paper Compartment.
  • Pull out the Movable Damper biex tneħħi r-romblu tal-karta li għandu jiġi sostitwit.
  • Xi rombli tal-karta jinkludu tubi. Neħħi t-tubu tal-karta wara li jispiċċa.
  • Daħħal sezzjoni waħda tal-magħżel fir-romblu tal-karta li se jiġi installat.
  • Place the paper roll into the Paper Compartment.
  • Erġa' installa l-Movable Damper u imbottaha sat-tarf tar-romblu tal-karta.
  • Pull the paper roll out until it extends beyond the Paper Output Slot.
  • Agħlaq il-Qoxra ta 'Fuq.
• Tixgħel l-Istampatur
  • Long press the Power Button for three seconds until the Indicator Light is on.
• Konnessjoni permezz tal-Bluetooth
  • Open the ‘Faith Tag' app.
  • The app will request permission to use Bluetooth. Tap ‘OK’ to grant permission.
  • Tap ‘Connect’ on the home page.
  • Once connected, tap the home page to view skripts.
• Stampar
  • After connecting, tap ‘Print’.
  • Tap ‘Print’ again to confirm.
  • L-istampar huwa komplut.
• Tearing Off Labels
  • Qargħ it-tikketta tul il-Ħruġ tal-Karta.
  • Neħħi l-kisi ta' wara.
  • Stick the label onto a dry surface.
• Issolvi l-problemi
  • Il-printer mhux qed jixgħel: Ensure the printer is charged. Refer to ‘Charging Instructions’.
  • Kwistjonijiet tal-istampar: Check if the paper roll is properly loaded. Refer to ‘Replacing the Paper Roll’.
  • Problemi bil-konnessjoni Bluetooth: Ensure Bluetooth is enabled on your device and the ‘Faith Tag’ app has permission to use it. Try restarting the printer and the app.
  • Kwalità tal-istampar fqira: Ensure the paper roll is inserted correctly and is not old or damaged. The print head may be hot; allow it to cool down before further use.
  • Interference (FCC/IC): This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Introduzzjoni tal-Prodott

1.1 Lista tal-Ippakkjar

Il-kwantità u l-ispeċifikazzjonijiet tar-romblu(i) tal-karta huma mfassla skont il-pakkett li għażilt.
1.2 Istruzzjoni tal-Partijiet tal-Istampatur

Nibdew

2.1 Niżżel l-App
Fittex għal il-“FidiTag” app on App Storeo or Google PlayTM for download and installation.

2.2 Gwida għall-Utent
Qabel tibda l-istampar, jekk jogħġbok kun żgur li r-romblu tal-karta jkun mgħobbi sew fil-kompartiment tal-karta. Għal struzzjonijiet dettaljati, irreferi għat-taqsima tal-manwal “3. Sostituzzjoni tar-Romblu tal-Karta.”

Biex tixgħel l-istampatur, agħfas fit-tul il-Butun tal-Enerġija għal tliet sekondi sakemm id-Dawl tal-Indikatur ikun mixgħul.

Konnessjoni kompluta. Tektek il-paġna ewlenija biex view skritturi.

Tissostitwixxi r-Roll tal-Karta

Take out a brand new paper rollZ01
Please skip this step if the paper roll you ave is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper Roll Spindle.

Istruzzjonijiet għall-Iċċarġjar

1. Jekk jogħġbok ipprepara l-adapter tal-enerġija tiegħek stess (DC 5V/2A) b'port tat-Tip A.
2. Daħħal it-tarf tat-Tip Ċ (it-tarf ċatt) tal-kejbil USB fil-Port tal-Ċarġer tat-Tip Ċ tal-F21 u daħħal it-tarf tat-Tip A (it-tarf wiesa') fil-port tat-Tip A tal-adapter tal-enerġija.
3. Wara li tikkonnettja u twaħħalha, jekk jogħġbok iċċekkja l-istatus tad-dawl indikatur tal-istampatur. Meta l-istampatur ikun qed jiċċarġja, id-dawl indikatur jibda jteptep bil-mod b’“dawl abjad”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge: when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. Billi l-istampatur jista' jisħon waqt l-iċċarġjar, evita li tpoġġih fuq materjali bħal qoton jew bjankerija.
6. Ladarba l-batterija tkun iċċarġjata kompletament, jekk jogħġbok aqla’ l-ċarġer minnufih.
O Evita li tuża l-istampatur waqt li jkun qed jiċċarġja. L-użu tal-istampatur waqt li jkun qed jiċċarġja jista' jwassal għal tnaqqis fil-veloċità tal-iċċarġjar, kompromess fil-kwalità tal-istampar, u ħajja tal-batterija mqassra.

Noti Speċjali

Il-kumpanija tassumi responsabbiltà sħiħa għar-reviżjoni u l-ispjegazzjoni ta 'dan il-manwal, billi teżerċita l-akbar diliġenza biex tiggarantixxi l-eżattezza tiegħu. Madankollu, jekk jogħġbok innota li kwalunkwe titjib tekniku fil-prodott jista' ma jiġix innotifikat separatament, u li l-immaġni tal-prodott, l-aċċessorji, l-interfaces tas-softwer, eċċ. f'dan il-manwal iservu biss bħala illustrazzjonijiet u referenzi. Minħabba aġġornamenti u titjib tal-prodott, il-prodott attwali jista 'jvarja kemmxejn mill-immaġini. Jekk jogħġbok irreferi għall-prodott fiżiku għal rappreżentazzjonijiet preċiżi.