QANBA RUBY Arcade Controller Instruction Manual

QANBA RUBY Arcade Controller

Leġġenda

1. Swiċċ tal-kompatibbiltà
2. Click Switch
3. Swiċċ tal-Mod
4. Indikatur tal-Enerġija
5. Buttuna tad-dar
6. Port tal-kejbil USB-C
7. Turbo LED
8. MF LED
9. Buttuna Turbo
10. Buttuna MF
11. Buttuna lura
12. Ibda buttuna
13. Buttuni ta' azzjoni
14. USB Dongle
15. Irrisettja buttuna

Operazzjoni tal-Prodott

Connecting to Host Devices

Connect to a PC, mobile phone, or other devices

Konnessjoni bil-fili

• Kun żgur li l-apparat huwa mixgħul.
• Connect the USB-C cable (A) to the device (the R1 power indicator will light up).
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.

Connecting to Host Devices

Connect to a PC, mobile phone, or other devices

Konnessjoni bla fili

• Kun żgur li l-apparat huwa mixgħul.
• Insert the USB Dongle (14) into the device.
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.
• Press the Home Button (5) to power on and reconnect to the USB Dongle.
  • Smart TV / PC / Laptop / Tablet / Mobile Phone / TV Box
  • Ordinateur portable
  • PC
  • Smart TV/PC/ Laptop/Tablet
  • TV inteligente/PC

Repairing the Controller with the USB Dongle

• If the connection is lost or the USB Dongle (14) is replaced, press and hold USB Dongle button (B) on the USB Dongle (14) and insert it into the USB port of the host device.
• After removing the USB Dongle (14), reinsert it into the USB port of the host device without pressing USB Dongle button (B) again to complete pairing with the powered-on Ruby controller.

Nota:
If the Ruby controller does not need to be paired with the USB Dongle (14) again, do not press and hold the USB Dongle button (B) on the USB Dongle (14) when plugging in or removing the receiver.

Qabbad l-Apparat

Qawwa LED

Konnessjoni tal-Cable USB

• Connect the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The power indicator (4) will light up.
• When the battery is low, the power indicator (4) flashes slowly to indicate charging after connecting the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The indicator remains solid once fully charged.

2.4G Wireless Connection Mode

• Press the HOME button (5) to power on and start searching. The power indicator (4) will flash. Once pairing with the USB Dongle (14) is successful, the indicator will remain solid.
• When using the R1 device, the power indicator (4) will flash to indicate a low battery and that charging is required.

Nota: Do not connect the USB cable in 2.4G wireless mode; otherwise, the device will switch to USB cable mode by default. The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection.

USB Dongle (14) Indicator

In 2.4G wireless connection mode: 

• The indicator on the USB Dongle (14) flashes while searching and stays lit when pairing is successful.
• The indicator is off when the USB Dongle (14) is not paired.

RESET Button (15)

1. Press the RESET button (15) to power on the device.
2. Press the RESET button (15) to restore the Ruby controller from update mode to normal controller mode.

BACK/C Mode Selection

• When the Click switch (2) is set to the Back position, the Back button (11) is enabled (default), and the Action Button C (13) is disabled.
• When the Click switch (2) is set to the C position, the Action Button C (13) is enabled, and the Back button (11) is disabled.

MODE (Joystick Direction Mode Selection)

• When the mode switch (3) is set to the DP position, D-Pad (DP) mode is enabled (default).
• When the mode switch (3) is set to the LS position, Left Stick (LS) mode is enabled.

Nota: Some retro emulators only support the LS function. If the joystick does not respond, please switch the direction mode.

Buttuna TURBO

• Each of the A/B/X/Y/R1/L1/R2/L2/R3/L3 action buttons (13) can be switched among three turbo modes:
• Turbo Off (default) – LED (7) Off
• Press Turbo – LED (7) flashes red while the button is pressed
• Auto Turbo – LED (7) flashes continuously
• Press and hold the TURBO button (9) together with one or more action buttons (13), then release to cycle through the three turbo modes.

Nota

• The ▲/▼/◀/▶ directional buttons cannot be set to the turbo function.
• The turbo function has no memory. All turbo settings will be cleared automatically when the USB wired connection is disconnected or the device is powered off wirelessly.

Buttuna MF

• With the MF LED (8) off (factory default), the four directional buttons operate in center‑reset mode:
• Press ◀ and ▶ (13) at the same time to reset to the center.
• Press ▲ and ▼ (13) at the same time to reset to the center.
• Press the MF button (10) to turn on the MF LED (8). The four directional buttons will switch to last‑input priority mode:
• The later‑pressed ◀/▶ or ▲/▼ directional button (13) overrides the earlier‑held one.
• Hold ▶ then press ◀: output is ◀.
• Hold ◀ then press ▶: output is ▶.
• Hold ▼ then press ▲: output is ▲.
• Hold ▲ then press ▼: output is ▼.
  • Nota: MF settings are not saved. After disconnecting the USB cable or entering 2.4G sleep mode, the device will automatically return to the default center‑reset mode with the MF indicator off..

Operazzjoni

• Isem tal-Prodott
  
  • QANBA RUBY Arcade Controller
• Mudell
  
  • R1
• Mikroswiċċ
  
  • Pro baxxfile silent switches
• Dimensjonijiet
  
  • 330 mm x 226 mm x 23 mm / 13.0 in x 8.9 in x 0.9 in
• Piż
  
  • 0.81 kg / 1.79 lbs
• Tul tal-Cable USB
  • 2 m / 6.56 pied

Istruzzjonijiet għall-Iċċarġjar

• Charge via the USB port on a computer, or use the wired mode to charge while playing.
• Use a standard charger with 5V, 1–2A output.

Konformità

This product complies with the following regulatory information and safety tests:

• USB 2.0 konformi
• FCC: Dan l-apparat jikkonforma mal-Parti 15 tar-Regoli tal-FCC. It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin:

1. Dan l-apparat ma jistax jikkawża interferenza ta 'ħsara.
2. Dan l-apparat għandu jaċċetta kwalunkwe interferenza riċevuta, inkluża interferenza li tista 'tikkawża tħaddim mhux mixtieq.

Twissijiet, Sigurtà, u Garanzija

• Aqra dan il-manwal tal-istruzzjonijiet bir-reqqa.
• Do not use alcohol or liquids to clean this product; use a dry cloth instead.
• Do not disassemble the interior.
• When not in use, unplug this product and store the USB cable to prevent tripping hazards.
• This product in a cool, dry place away from liquids, fumes, and chemicals.
• Do not leave this product in hot climates, such as in the trunk of a car, for a long time on a hot summer day.
• Do not stack other items on top of this product.
• Commercial use of this prcduct is prohibited.
• The design and specifications of this product are subject to change without prior notice.
• The pr«luct is not suitable for children under 12 years old.
• Jekk jogħġbok żomm dan il-manwal għal referenza faċli.
• QANBA CN TECH will repair or replace prcxluct at its discretion 12 months from purchase date.

Appoġġ għall-klijenti

• Telefon: +86 755 29171459
• Email: info@qanba.com

DIKJARAZZJONI TAL-FCC

Dan l-apparat jikkonforma mal-parti 15 tar-Regoli tal-FCC. It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin: (1) Dan l-apparat ma jistax jikkawża interferenza ta 'ħsara, u (2) dan l-apparat għandu jaċċetta kwalunkwe interferenza riċevuta, inkluż interferenza li tista' tikkawża tħaddim mhux mixtieq. Kwalunkwe tibdil jew modifika mhux approvata espressament mill-parti responsabbli għall-konformità tista' tħassar l-awtorità tal-utent biex iħaddem it-tagħmir.

NOTA: Dan it-tagħmir ġie ttestjat u nstab li jikkonforma mal-limiti għal apparat diġitali tal-Klassi B, skont il-Parti 15 tar-Regoli tal-FCC. Dawn il-limiti huma mfassla biex jipprovdu protezzjoni raġonevoli kontra interferenza dannuża f'installazzjoni residenzjali. Dan it-tagħmir jiġġenera, juża, u jista 'jirradja enerġija ta' frekwenza tar-radju u, jekk mhux installat u użat skont l-istruzzjonijiet, jista 'jikkawża interferenza ta' ħsara għall-komunikazzjonijiet bir-radju. Madankollu, m'hemm l-ebda garanzija li l-interferenza ma sseħħx f'installazzjoni partikolari. Jekk dan it-tagħmir jikkawża interferenza ta' ħsara għar-riċezzjoni tar-radju jew tat-televiżjoni, li tista' tiġi determinata billi jintefa u jinxtegħel it-tagħmir, l-utent huwa mħeġġeġ jipprova jikkoreġi l-interferenza b'waħda jew aktar mill-miżuri li ġejjin:

• Orjenta mill-ġdid jew iċċaqlaq l-antenna li tirċievi.
• Żid is-separazzjoni bejn it-tagħmir u r-riċevitur.
• Qabbad it-tagħmir fi żbokk fuq ċirkwit differenti minn dak li miegħu huwa konness ir-riċevitur.
• Ikkonsulta lin-negozjant jew tekniku tar-radju/TV b'esperjenza għall-għajnuna.

L-apparat ġie evalwat biex jissodisfa r-rekwiżit ġenerali ta' espożizzjoni RF. L-apparat jista 'jintuża f'kundizzjonijiet ta' espożizzjoni portabbli mingħajr restrizzjoni.

Issolvi l-problemi

• Controller not connecting wirelessly: Ensure the USB Dongle (14) is properly plugged into the host device. If the controller was previously paired, try re-pairing it by pressing the USB Dongle button (B) on the dongle.
• Il-kontrollur ma jirrispondix: Check if the controller is powered on (press the RESET button 15). If using wirelessly, ensure the battery is charged. If using a USB cable, ensure it’s securely connected.
• Joystick not working in an emulator: Try switching the joystick direction mode between D-Pad (DP) and Left Stick (LS) using the MODE switch. Some emulators only support one mode.
• Il-funzjoni turbo ma taħdimx: Ensure you are not trying to set turbo on directional buttons. Remember that turbo settings are cleared upon disconnection or power off.
• Controller powers off automatically: The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection. Reconnect or press a button to wake it up.