100986 Sequential Switch
"
Speċifikazzjonijiet:
- Daqs: 8HP
- Current draw: +12V: 170mA, -12V: 94mA, +5V: 0mA
- Fond: 33mm
- Impedenza tad-dħul: 100k
- Impedenza tal-ħruġ: 1k
Informazzjoni dwar il-Prodott:
REWIRE is a 4×4 sequential switch and signal router that allows
you to rewire your modular patch without physically changing
cables. It features four inputs and four independent outputs, each
with level control, switching logic, and real-time manipulation
capabilities. This module is designed for dynamic signal flow,
generative mayhem, and precise performance.
Installazzjoni:
- Skonnettja sintet tiegħek mis-sors tal-enerġija.
- Check the polarity of the ribbon cable to avoid damaging the
modulu. - Ensure the red line on the cable aligns with the -12V
immarkar. - Connect the module correctly before powering up.
Użu tal-Prodott:
REWIRE can be used for various applications:
- Rotate 4 LFOs through 4 destinations for evolving
modulazzjoni. - Shift a melody between 4 voices dynamically.
- Create generative drum grooves by remapping triggers.
- Step an audio signal through 4 FX chains rhythmically.
Pumi tal-kontroll:
DIV Knob (Y): Controls the division of the incoming clock for
dynamic rhythm generation.
SHIFT Knob (Z): Manually rotates the routing to different
positions based on the selected mode (In >>, In ><,
In Random).
Even when manually switching positions, external clock input is
required to design custom routing sequences using external CV.
Mistoqsijiet Frekwenti (FAQ):
Q: Can REWIRE be used for live performances?
A: Yes, REWIRE is designed for live performances as it allows
dynamic signal routing and real-time manipulation of audio, CV, and
iqanqal.
Q: What happens if I connect the module in the wrong
direzzjoni?
A: Connecting the module in the wrong direction may damage it
and will not be covered by the warranty. Always double-check the
polarity before powering up.
"`
REWIRE USER MANUAL
Informazzjoni Importanti dwar is-Sigurtà
To ensure safe operation and long-term reliability, please observe the following guidelines whenever using this module:
Aqra l-istruzzjonijiet kollha qabel tħaddem l-apparat.
Power requirements: Use only the power supply type specified for Eurorack systems, as indicated in the operating instructions or marked on the module.
Hearing protection: When used with amplifiers, headphones, or speakers, the system may produce high sound levels capable of causing permanent hearing damage. Avoid extended sessions at high volumes.
Foreign objects and liquids: Ensure that no objects fall into the module and no liquids enter the enclosure through any openings.
Avoid moisture: Do not use the module near water or in damp locations such as kitchens, bathrooms, wet basements, or near swimming pools.
Ventilation: Install the module in a location that allows proper airflow and prevents overheating.
Heat sources: Keep the device away from radiators, heat vents, and other equipment that generates heat. Do not expose the module to open flames or direct sunlight.
.
SPECS: Size: 8HP Current draw: +12V: 170mA, -12V: 94mA, +5V: 0mA Depth: 33mm Input Impedance: 100k Output Impedance: 1k
INTRODUZZJONI:
REWIRE is a 4×4 sequential switch and signal router that lets you rewire your modular patch on the fly without ever touching a cable. Designed for dynamic signal flow, generative mayhem, and performance precision, REWIRE gives you four inputs and four independent outputs, each with level control, switching logic, and real-time manipulation.
Whether you’re routing audio, CV, or triggers, REWIRE transforms your system into a living, shifting network of connections. Clocked, resettable, shiftable, and divisible this isn’t just a switch, it’s a patch programmer, a performance brain, and a creative playground in just 10HP.
* Rotate 4 LFOs through 4 destinations for evolving modulation.
.INSTALLATION:
* Skonnettja sintet tiegħek mis-sors tal-enerġija.
* Double check polarity from the ribbon cable. If you damage the module by powering in the wrong direction it will not be covered by the warranty.
* After connecting the module check again you have connected the right way, the red line must be on the -12V
* Dynamically shift a melody between 4 voices. * Create generative drum grooves by remapping triggers. * Step an audio signal through 4 FX chains rhythmically. * Turning REWIRE into a manual preset bank using the faders alone.
.
A B Ċ D
E FGH
I JKL
M
N
O
P
QR S T
U VWX
Y
Z
Front Panel Layout Top Row Inputs CLOCK (A) — Clock and trigger input RESET (B) — Reset trigger input SHIFT (C) — Shift CV input DIV (D) — Clock divisions CV input CH1CH4 (EH) — Channel inputs 14 Bottom Row Outputs OUT1OUT4 (IL) — Channel outputs 14, each with independent routing, level, and polarity controls LED Indicators LEDs display both routing position and signal polarity. They are bipolar: Green indicates a positive signal. Red indicates a negative signal.
A B Ċ D
E FGH
I JKL
M
N
O
P
QR S T
U VWX
Y
Z
Controls Level Faders (QT) Each output has its own level fader for attenuation or amplification of the routed signal.
Polarity Switches (UX) Toggle between: Unipolar (0 to +) Bipolar (- to +)
Attenuverter Inputs (QT) Signal attenuverter CV inputs allow external control of level and polarity.
DIV Knob (Y) Controls the division of the incoming clock. Select from multiple division options for dynamic rhythm generation.
SHIFT Knob (Z) Manually rotates the routing to positions >1, >2, or >3. The SHIFT knob mirrors the behavior of the SHIFT CV input:
In >> mode, the external clock advances the routing forward.
In >< mode, the routing moves in a pendulum (back-and-forth) pattern.
In Random mode, each clock pulse selects a routing position randomly.
Even when switching manually to >1, >2, or >3, REWIRE still requires an external clock. This ensures you can design your own custom routing sequences using external CV–such as 0,2,4,4 or 1,1,1,3–rather than being restricted to deterministic step sequences.
How REWIRE Works
REWIRE steps through routing states using an an external clock. Each step determines which input is connected to which output. Shifting allows manual or CV-controlled movement through routing states, while reset returns to the first step.
This makes REWIRE ideal for: Sequential switching Trigger routing, dynamic pattern changes Audio Re-routing CV Re-routing
Inputs in Detail Clock (A) Advances the routing sequence. Accepts triggers or clock signals.
Reset (B) When a trigger is received, all outputs immediately switch to position 1 (as set by the routing pot), and the clock divider counter is reset. This ensures tight synchronization with external sequencers.
Shift (C) With the SHIFT pot or CV_shift, you can manually rotate the routing to positions >1, >2, >3. If >> is selected, the clock will switch signals forward. If >< is selected, the clock will switch signals in a pendulum motion. If random is selected, the clock will switch signals randomly. Even when switching manually or with CV to positions >1, >2, or >3, the module still requires an external clock. This allows you to build custom sequences using external CV–such as 0,2,4,4 or 1,1,1,3–instead of relying solely on deterministic sequencing.
Clock Division CV (D) Modulates the clock divider under CV control.
Channel Inputs (EH) These are the four sources you want to route. They can be audio, CV, or triggers.
Outputs in Detail Channel Outputs (IL) Each output independently switches through the four inputs depending on the routing state.
LED Indicators (MP) Show which routing step each output is currently selecting.
Modes of Operation Sequential Mode Each clock pulse advances the router one step.
Shift Mode Shift can offset all routing positions globally. Useful for creating evolving patterns.
Clock Division Use the DIV knob and CV input to slow down or speed up the stepping pattern.
Manual Routing Using the SHIFT knob, you can scroll through routing states by hand.
Dokumenti / Riżorsi
 |
Patching Panda 100986 Sequential Switch [pdfManwal tal-Utent 100986 Sequential Switch, 100986, Sequential Switch, Switch |