Oxbot R1 High Performance Controller User Guide

Oxbot R1 High Performance Controller

Kun af l-Apparat Tiegħek

Buttons & Controls Overview

• Buttuna tal-Qawwa: Agħfas u żomm għal 3 sekondi biex tixgħel/itfi.
• Touch Screen: Swipe up, down, left, or right on the home screen to quickly switch between function panels.
• Buttuna Lura: Short press: Go back to the previous menu. Long press (about 1 second): Quickly return to the home screen.

Main Interface Overview

1. Isem tal-Apparat
2. Remote Controller Bluetooth Indicator
3. Qawwa tal-Ħruġ RF
4. Qawwa tas-Sinjal RF
5. Livell tal-Batterija tal-Kontrollur Remot
6. Find Drone Button
7. Ħin Operattiv
8. Buttuna tal-Bind
9. Trim Status Bar
10. Widgets

Basic Functions & App Operation

Funzjonijiet Bażiċi
Model Switching: The remote controller can store multiple model profiles (including channel mapping, switch settings, etc.), allowing you to quickly switch between devices.

Passi:

• On the home screen, swipe left to enter the “Model Selection” menu
• Browse and select the desired model Tap “Switch”.

Binding Function: Binding is required when using the receiver for the first time or after replacing it. This device only supports the ELRS 2.4GHz (ExpressLRS) protocol.

Passi:

1. Power cycle the device receiver twice (power on then off counts as one cycle). Keep it powered on during the third power-up.
2. Observe the receiver LED. A rapid double flash indicates Bind mode.
3. On the remote controller home screen, tap “Bind” to complete the binding process.

Smart Locate (Find Drone): Smart Locate (Find Drone): Locate your device quickly if it crashes or lands unexpectedly.
(Note: The device must be equipped with a GPS module, and at least 6 satellites must be locked. Accuracy depends on the number of satellites. The displayed location is the coordinate information last returned by the device’s positioning module and is for reference only.)

Passi:

• On the remote controller, tap “Find Drone
• A location QR code will appear on the screen
• Scan it with your phone to see the device’s last known location  Use map navigation to reach the drop location.

App Connectivity & Control System Tuning
Oxbot App Operation (Remote Controller Configuration) Used for remote controller settings, Bluetooth firmware updates, and viewing the digital user manual.

Passi:

1. Swipe down on the home screen to open the menu and turn on Bluetooth.
2. Open the Oxbot App on your phone, tap “Add New Device”, then search for and connect to this remote controller.
3. Once connected, you can configure settings and perform firmware updates on your phone.

SpeedyBee App Operation (Wireless Parameter Configuration)
Support wireless connection for adjusting and maintaining device control system parameters.

Passi:

1. Swipe down on the home screen to open the menu and turn on Bluetooth.
2. Use the included USB-C cable to connect the remote controller to the device control module.
3. Open the SpeedyBee App and tap “+” to search for the remote controller.
4. Tektek "Ikkonnettja".
5. Once connected, you can adjust device control parameters or update firmware directly from your phone.

Modalità USB
When connected to a computer via USB-C cable, two modes are supported:

• Gamepad Mode: Functions as a professional simulator controller for mainstream simulators.
• Modalità tal-Iċċarġjar: Charges the remote controller.

Customization & Safety Information

1. Personalizzazzjoni
   • Custom Control Panel: Swipe left on the home screen to enter “Model Selection”, then tap “Layout” to enter edit mode.
   • You can freely add or replace widgets (such as attitude indicator, channel output monitor, etc.) to create your personalized control interface.(Note: Additional OTA upgrade features, such as theme colors and background customization, are currently under development. Stay tuned.)
2. Istruzzjonijiet tas-Sigurtà
   • Is-Sigurtà l-Ewwel: Always remove all external rotating parts before indoor binding, tuning, or power testing.
   • Kontroll ta' qabel it-Titjira: Before powering on, ensure all switches are in their default (safe) positions and the throttle stick is at its lowest position.
   • Antenna Warning: Do not power on or transmit high-power signals without an antenna installed, as this may damage the internal RF module.
   • Konformità Regolatorja: Before use, ensure you understand and strictly comply with local radio and electronic device regulations.

Dikjarazzjoni tal-FCC

Dan l-apparat jikkonforma mal-parti 15 tar-regoli tal-FCC. It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin:

1. Dan l-apparat jista 'ma jikkawżax interferenza ta' ħsara, u
2. Dan l-apparat għandu jaċċetta kwalunkwe interferenza riċevuta, inkluża interferenza li tista 'tikkawża tħaddim mhux mixtieq.

Bidliet jew modifiki mhux approvati espressament mill-parti responsabbli għall-konformità jistgħu jħassru l-awtorità tal-utent biex iħaddem it-tagħmir.

NOTA: Dan it-tagħmir ġie ttestjat u nstab li jikkonforma mal-limiti għal apparat diġitali tal-Klassi B, skont il-parti 15 tar-Regoli tal-FCC.

Dawn il-limiti huma mfassla biex jipprovdu protezzjoni raġonevoli kontra interferenza dannuża f'installazzjoni residenzjali. Dan it-tagħmir jiġġenera użi u jista 'jirradja enerġija ta' frekwenza tar-radju u, jekk mhux installat u użat skont l-istruzzjonijiet, jista 'jikkawża interferenza ta' ħsara għall-komunikazzjonijiet bir-radju. Madankollu, m'hemm l-ebda garanzija li l-interferenza ma sseħħx f'installazzjoni partikolari. Jekk dan it-tagħmir jikkawża interferenza ta' ħsara għar-riċezzjoni tar-radju jew tat-televiżjoni, li tista' tiġi determinata billi jintefa u jinxtegħel it-tagħmir, l-utent huwa mħeġġeġ jipprova jikkoreġi l-interferenza b'waħda jew aktar mill-miżuri li ġejjin:

• Orjenta mill-ġdid jew iċċaqlaq l-antenna li tirċievi.
• Żid is-separazzjoni bejn it-tagħmir u r-riċevitur.
• Qabbad it-tagħmir fi żbokk fuq ċirkwit differenti minn dak li miegħu huwa konness ir-riċevitur.
• Ikkonsulta lin-negozjant jew tekniku tar-radju/TV b'esperjenza għall-għajnuna.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device has been evaluated to meet general RF exposure requirement. The device can be used in an uncontrolled environment without restriction.