Gwida għall-Utent tas-Softwer MOSS IllumaSync

Importanti: If other devices are powered on, they may flash randomly. Power off other devices or put them in manual mode.
Funzjoni RDM: Press the RDM button next to each device in the list to access basic RDM functions.

Qabbad u Skopri Apparati:

Press Connect in the Individual Update tab.
If an error occurs, reinsert the USB and ensure the computer recognizes the device dongle.
Press Discover All to list connected devices.

Agħżel il-Firmware u Aġġorna l-Apparati:

Click Browse and choose the firmware file.
Select the device and press Update. Expect flashing if other devices are not powered off.

Metodu Alternattiv:

Click the software version number to update a specific device.
Factory reset your device after firmware update by holding down the BACK & ENTER buttons.

IllumaSync™ Software Guide

IllumaSync™ software is designed to work with the IllumaDim™ product family of LED controllers. The software allows for firmware updates, setting updates, and simple DMX testing and control. Too use the software, you will require three things:

One or more IllumaDim™ Products from Moss LED™
IllumaSync™ software from the Moss LED™ websit
IllumaSync™ USB Dongle

IMPORTANTI

Before you start, ensure that all devices are connected via DMX cabling and are powered on.

It is advised to only have IllumaDim™ products on the DMX chain when operating the IllumaSync Software.
Moss LED has not tested the effects of running the IllumaDim™ software while using non-IllumaDim™ products, and the effects are unknown.

Moss LED cannot be held liable for any unwanted effects caused by running IllumaSync™ software on nonnon-IllumaDim™™ products.

Plug all IllumaDim™ Products together via DMX cabling
Plug the IllumaSync™ USB to DMX Dongle Cable into the first IlluamDim™ product in the DMX chain

Download driver (if required) https://files.mossled.com/Software/CDM212364_Setup.zip
Download IllumaSync software https://files.mossled.com/Software/IllumaSyncV1.zip
Run IllumaSync™ Software
If prompted “Windows protected your PC,” choose “More Info” followed by “Run anyway”

AĠĠORNAMENT TAL-FIRMWARE TA' UPLOAD SINGOLU

Functionality: Upload firmware to one IllumaDim™ device at a time. This method is most successful.

Importanti: If other devices are powered on, they may flash randomly. Power other devices off or put them in manual mode.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

AĠĠORNAMENT TAL-FIRMWARE TAL-GRUPP

Functionality: Upload firmware to multiple IllumaDim™ devices at a time.

Recommended: Use when devices are physically close together and connected with a professional DMX cable.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

AĠĠORNAMENT TAS-SETTINGS TAL-GRUPP

™
Functionality: Configure the settings of multiple IllumaDIM™ devices simultaneously

Recommended: Use when devices are physically close together and connected with a professional DMX cable.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

TESTER DMX

Functionality: IllumaSync™ can be used as a DMX tester for 1 universe at a time.

www.mossled.com
1.800.924.1585 -416.463.6677
info@mossled.com

FAQs

M: X'għandi nagħmel jekk apparat jeħel fil-modalità ta' aġġornament?
A: Power cycle the device and try the update process again. Do not remove power during firmware update.

Dokumenti / Riżorsi

Softwer MOSS IllumaSync [pdfGwida għall-Utent
IllumaDimTM, Kejbil tad-Dongle USB għal DMX, Softwer IllumaSync, Softwer

Referenzi

Manwal għall-Utent

Softwer MOSS IllumaSync

Speċifikazzjonijiet

Istruzzjonijiet għall-Użu tal-Prodott