M5Stack C6LoRA Module User Manual

M5Stamp C6LORA
Mudell: Stamp C6LoRA
Manwal għall-Utent

Deskrizzjoni

Stamp C6LoRa is a high-performance programmable LoRa module designed for the 830 ~ 930 MHz frequency range. The module features an ESP32-C6 SoC, an SX1262 LoRa RF transceiver, and an LNA signal amplifier chip. It comes with two onboard IPEX antenna connectors for external Wi-Fi and LoRa antennas, respectively.
At its core, the ESP32-C6 integrates a rich set of peripheral interfaces, enabling extended functionality through secondary development. It also supports 2.4GHz Wi-Fi 6, offering broader possibilities for IoT applications. Additionally, the module includes a  PI4IOE5V6408 IO expander chip, which is used for LoRa transceiver circuit control and amplifier enable signal management, delivering enhanced power efficiency and providing additional usable IO resources.
A built-in DC-DC converter supports a DC input range of 3.7 to 5V and allows for lithium battery power, making it adaptable to various hardware deployment scenarios. The module is well-suited for long-range communication applications such as smart irrigation, remote metering, and power equipment control.

Speċifikazzjonijiet

Bidu malajr

3.1 Preparazzjoni

1. Żur l-Arduino uffiċjali websit u installa l-Arduino IDE
   https://www.arduino.cc/en/Main/Software
2. Żid il-Maniġer tal-Bord li ġej URL biex File → Preferenzi → Maniġer tal-Bordijiet Addizzjonali URLs:
   https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
3. Iftaħ il-Bordijiet Manager, fittex għal “ESP32”, u kklikkja fuq installa.
4. After installation, select the board “ESP32C6 Dev Module.”
5. Configure the following options. USB CDC On Boot: “Enabled”

3.2 Wi-Fi Test
Agħżel l-exampil-programm “Examples” → “WiFi” → “WiFiScan”, agħżel il-port li jikkorrispondi mat-tagħmir tiegħek, u kklikkja l-buttuna kumpila u upload fir-rokna ta’ fuq tax-xellug.
Wara li t-tlugħ ikun komplut, iftaħ is-Serial Monitor biex view Informazzjoni dwar l-iskennjar tal-Wi-Fi.

3.3 Skennjar BLE
Agħżel l-exampil-programm “Examples” → “BLE” → “Scan”, agħżel il-port li jikkorrispondi mat-tagħmir tiegħek, u kklikkja l-buttuna compile and upload fir-rokna ta’ fuq tax-xellug.
Wara li t-tlugħ ikun komplut, iftaħ is-Serial Monitor biex view Informazzjoni dwar l-iskennjar BLE.

3.4 LoRa TX
After burning the LoRa test firmware, check the LoRa transceiver information via the ESP32-C6 USB CDC serial port.

Twissija tal-FCC

Attenzjoni FCC:
Kwalunkwe Tibdil jew modifika mhux approvata espressament mill-parti responsabbli għall-konformità tista' tħassar l-awtorità tal-utent biex iħaddem it-tagħmir.
Dan l-apparat jikkonforma mal-parti 15 tar-Regoli tal-FCC. It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin: (1) Dan l-apparat ma jistax jikkawża interferenza ta 'ħsara, u (2) dan l-apparat għandu jaċċetta kwalunkwe interferenza riċevuta, inkluż interferenza li tista' tikkawża tħaddim mhux mixtieq.

NOTA IMPORTANTI:
Nota: Dan it-tagħmir ġie ttestjat u nstab li jikkonforma mal-limiti għal apparat diġitali tal-Klassi B, skont il-parti 15 tar-Regoli tal-FCC. Dawn il-limiti huma mfassla biex jipprovdu protezzjoni raġonevoli kontra interferenza dannuża f'installazzjoni residenzjali. Dan it-tagħmir jiġġenera, juża, u jista 'jirradja enerġija ta' frekwenza tar-radju u, jekk mhux installat u użat skont l-istruzzjonijiet, jista 'jikkawża interferenza ta' ħsara għall-komunikazzjonijiet bir-radju. Madankollu, m'hemm l-ebda garanzija li l-interferenza ma sseħħx f'installazzjoni partikolari. Jekk dan it-tagħmir jikkawża interferenza ta' ħsara għar-riċezzjoni tar-radju jew tat-televiżjoni, li tista' tiġi determinata billi jintefa u jinxtegħel it-tagħmir, l-utent huwa mħeġġeġ jipprova jikkoreġi l-interferenza b'waħda jew aktar mill-miżuri li ġejjin:

• Orjenta mill-ġdid jew iċċaqlaq l-antenna li tirċievi.
• Żid is-separazzjoni bejn it-tagħmir u r-riċevitur.
• Qabbad it-tagħmir fi żbokk fuq ċirkwit differenti minn dak li miegħu huwa konness ir-riċevitur.
• Ikkonsulta lin-negozjant jew tekniku tar-radju/TV b'esperjenza għall-għajnuna.

Dikjarazzjoni ta 'Espożizzjoni għar-Radjazzjoni FCC: Dan it-tagħmir jikkonforma mal-limiti ta' espożizzjoni għar-radjazzjoni FCC stabbiliti għal ambjent mhux ikkontrollat.

Nota Importanti:
Fil-każ li dawn il-kundizzjonijiet ma jistgħux jiġu sodisfatti (eżampeż., ċerti konfigurazzjonijiet ta' laptops jew ko-lokazzjoni ma' trasmettitur ieħor), allura l-awtorizzazzjoni tal-FCC ma tibqax titqies valida, u l-ID tal-FCC ma tistax tintuża fuq il-prodott finali. F'dawn iċ-ċirkostanzi, l-integratur tal-OEM ikun responsabbli biex jerġa' jevalwa l-prodott finali (inkluż it-trasmettitur) u jikseb awtorizzazzjoni separata tal-FCC.

Tikkettjar tal-Prodott Tmiem
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2AN3WM5STAMPC6LORA”.

Informazzjoni Manwal lill-Utent Aħħar
L-integratur OEM irid ikun konxju li ma jipprovdix informazzjoni lill-utent aħħari dwar kif jinstalla jew ineħħi dan il-modulu RF fil-manwal tal-utent tal-prodott finali li jintegra dan il-modulu.
Il-manwal għall-utent aħħari għandu jinkludi l-informazzjoni/twissijiet regolatorji kollha meħtieġa kif muri f'dan il-manwal.

Istruzzjonijiet ta 'integrazzjoni għall-manifatturi tal-prodott ospitanti skont KDB 996369 D03 OEM Manwal v01

2.2 Lista tar-regoli FCC applikabbli
CFR 47 FCC PARTI 15 SUBPARTI Ċ ġiet investigata. Huwa applikabbli għat-trasmettitur modulari.

2.3 Kundizzjonijiet speċifiċi għall-użu operattiv
This module is a stand-alone module. If the end product will involve multiple simultaneously transmitting conditions or different operational conditions for a stand-alone modular transmitter in a host, the host manufacturer has to consult with the module manufacturer for the installation method in the end system.

2.4 Proċeduri ta' moduli limitati
Mhux applikabbli

2.5 Disinni ta' l-antenna tat-traċċa
Mhux applikabbli

2.6 Konsiderazzjonijiet ta' espożizzjoni RF
The device has been evaluated to meet the general RF exposure requirements. The device can be used in mobile or fixed exposure conditions with a minimum distance of 20 cm between the radiator & user’s body.

2.7 Antenni
This radio transmitter has been approved by the Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

2.8 Tikketta u informazzjoni dwar il-konformità
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2AN3WM5STAMPC6LORA”.

2.9 Informazzjoni dwar il-modi tat-test u r-rekwiżiti addizzjonali tal-ittestjar
The host manufacturer that installs this module with limited modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C:15.247 and 15.209 requirement, only if the test result complies with FCC part 15.247 and 15.209 requirements, then the host can be sold legally.

Istruzzjonijiet ta 'integrazzjoni għall-manifatturi tal-prodott ospitanti skont KDB 996369 D03 OEM Manwal v01

2.10 Ittestjar addizzjonali, Parti 15 Subparti B ċaħda
This transmitter module is tested as a subsystem, and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of the rule requirements if applicable.

2.11 Innota l-Konsiderazzjonijiet tal-EMI
We recommend using “best practice” RF design engineering, testing, and evaluation in case non-linear interactions generate additional non-compliant limits due to module placement to host components or properties. The host manufacturer is responsible for ensuring compliance with the applicable FCC rules for the transmitters operating individually and simultaneously. This includes compliance for the summation of all emissions from all outputs occupying the same or overlapping frequency ranges, as defined by the applicable rules.

2.12 Kif Tagħmel Bidliet – Nota Importanti
Fil-każ li dawn il-kundizzjonijiet ma jistgħux jiġu sodisfatti (eżample, certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid, and the FCC ID cannot be used on the final product. In these circumstances, OEM integrator contacts Grantees to make permissive changes, or the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

Sakemm il-kundizzjonijiet kollha t'hawn fuq jiġu ssodisfati, mhux se jkunu meħtieġa aktar testijiet tat-trasmettitur. Madankollu, l-integratur OEM għadu responsabbli għall-ittestjar tal-prodott finali tagħhom għal kwalunkwe rekwiżit ta 'konformità addizzjonali meħtieġ b'dan il-modulu installat.