Manwal tal-Istruzzjonijiet tal-Kontrollur LED LTECH M9

LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Parametri Tekniċi

Dimensjonijiet

Installazzjoni tal-Prodott

Żewġ modi kif tiffissa d-detentur remot:

1. Waħħal id-detentur remot fil-ħajt b'żewġ viti.
2. Waħħal id-detentur remot fil-ħajt b'adeżiv 3M.

Nota: Jekk jogħġbok iġbed it-tab tal-batterija qabel l-ewwel użu

Funzjonijiet tal-buttuna

• Mixgħul/Mitfi: Press briefly to turn the light on or off.
• Aħmar/Aħdar/Blu: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Veloċità/luminożità +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   Example 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   Example 2:Red, Blue Two colors, Jump/Fade/Strobe
   Example 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

LE.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Aqbeż	Fade	Strobe
1	Iswed
2	Aħmar	Aħmar Statiku	Aħmar Jisparixxi 'l ġewwa u 'l barra	Strobe aħmar
3	Aħdar	Aħdar Statiku	Aħdar Fade In u Out	Strobe Aħdar
4	Blu	Blu Statiku	Blu Fade In u Out	Strobe Blu
5	Isfar	Isfar Statiku	Yellow Fade In and Out	Isfar Strobe
6	Vjola	Vjola Statika	Purple Fade In and Out	Strobe Vjola
7	Ċjan	Ċjaniku Statiku	Cyan Fade In and Out	Strobe Ċjan
8	Abjad	Abjad Statiku	Abjad Fade In u Out	Strobe abjad
9	Aħmar/Aħdar/Blu	Aqbeż Aħmar-Aħdar-Blu	Fade Aħmar-Aħdar-Blu	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Nota: One remote control can control an unlimited number of controllers

Irrisettja l-Funzjoni tal-Buttuna

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Tqabbil tal-Kodiċi

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Itfi l-kontrollur;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Kodiċi Clearing

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Status tad-Dawl Indikatur

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Nota: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Trasport u Ħażna

1.  Trasport
   Il-prodotti jistgħu jintbagħtu permezz ta' vetturi, dgħajjes u ajruplani.
   Waqt it-trasport, il-prodotti għandhom ikunu protetti mix-xita u mix-xemx. Jekk jogħġbok evita xokk qawwi u vibrazzjoni matul il-proċess tat-tagħbija u l-ħatt.
2. Ħażna
   Il-kundizzjonijiet tal-ħażna għandhom ikunu konformi mal-Istandards Ambjentali tal-Klassi I. Il-prodotti li ilhom maħżuna għal aktar minn sitt xhur huma rakkomandati li jerġgħu jiġu spezzjonati u jistgħu jintużaw biss wara li jkunu ġew kwalifikati.

Attenzjonijiet
Jekk jogħġbok uża f'ambjent ta 'ġewwa niexef;

• Meta tinstalla l-batterija, jekk jogħġbok qabbad it-terminal pożittiv u negattiv b'mod korrett. Jekk il-remote mhux se jintuża għal perjodu twil, ħu l-batterija barra;
• Meta d-distanza remota titqassar u jew ir-remot ma jaħdimx ta 'spiss, jekk jogħġbok ibdel il-batterija fil-ħin;
• Jekk jogħġbok ħudha bir-reqqa u poġġiha biex tevita waqgħat li jikkawżaw ħsara;
• Jekk isseħħ xi ħsara, jekk jogħġbok tippruvax tirranġa l-prodotti waħdek. Jekk għandek xi mistoqsija, jekk jogħġbok ikkuntattja lill-fornituri tiegħek.
• Dan il-manwal huwa soġġett għal bidliet mingħajr avviż ieħor. Il-funzjonijiet tal-prodott jiddependu fuq l-oġġetti. Jekk jogħġbok tħossok liberu li tikkuntattja lid-distributuri uffiċjali tagħna jekk għandek xi mistoqsija.

Ftehim ta 'Garanzija

Perjodi ta' garanzija mid-data tal-kunsinna: 5 snin.
Servizzi ta' tiswija jew sostituzzjoni b'xejn għal problemi ta' kwalità huma pprovduti fi ħdan perjodi ta' garanzija.

Esklużjonijiet tal-garanzija hawn taħt:
Il-kundizzjonijiet li ġejjin mhumiex fil-firxa ta' garanzija ta' servizzi ta' tiswija jew sostituzzjoni b'xejn:

• Lil hinn mill-perjodi ta' garanzija;
• Kwalunkwe ħsara artifiċjali kkawżata minn voltage, overload, or improper operations; Products with severe physical damage;
• Ħsara kkawżata minn diżastri naturali u force majeure;
• It-tikketti tal-garanzija u l-barcodes ġew imħassra.
• No any contract signed by our company.

1. It-tiswija jew is-sostituzzjoni pprovduti huma l-uniku rimedju għall-klijenti. Il-kumpanija tagħna mhijiex responsabbli għal kwalunkwe ħsara inċidentali jew konsegwenzjali sakemm ma tkunx fil-limiti tal-liġi.
2.  Il-kumpanija tagħna għandha d-dritt li temenda jew taġġusta t-termini ta’ din il-garanzija, u r-rilaxx bil-miktub għandu jipprevali.

TWISSIJA

• PERIKLU TA' INĠESTJONI: Dan il-prodott fih batterija tal-buttuni jew munita.
• MEWT jew korriment serju jistgħu jseħħu jekk jinbelgħu.
• Ċellula tal-buttuni jew batterija tal-munita li tinbelgħu jistgħu jikkawżaw Ħruq kimiċi Interni f'inqas sagħtejn.
• ŻOMM batteriji ġodda u użati FEJN MA JINTLAĦAQX MIT-TFAL
• Fittex attenzjoni medika immedjata jekk batterija tkun suspettata li tinbela' jew tiddaħħal ġewwa kwalunkwe parti tal-ġisem.
• Neħħi u immedjatament irriċikla jew armi l-batteriji użati skont ir-regolamenti lokali u żommu 'l bogħod mit-tfal. TARMIX il-batteriji fl-iskart tad-dar jew inċinera.
• Anke batteriji użati jistgħu jikkawżaw korriment gravi jew mewt.
• Ċempel ċentru lokali għall-kontroll tal-veleni għal informazzjoni dwar it-trattament.
• It-tip ta' batterija kompatibbli: CR2032.
• Il-batterija nominali voltage: 3Vdc.
• Batteriji mhux rikarikabbli m'għandhomx jiġu ċċarġjati mill-ġdid.
• Tisforzax skarikar, recharge, disassemble, saħħan 'il fuq (il-klassifikazzjoni tat-temperatura speċifikata tal-manifattur) jew inċinera. Jekk tagħmel hekk tista 'tirriżulta fi korriment minħabba venting, tnixxija jew splużjoni li tirriżulta fi ħruq kimiku.
• Kun żgur li l-batteriji huma installati b'mod korrett skont il-polarità (+ u -).
• Tħallatx batteriji qodma u ġodda, marki differenti jew tipi ta 'batteriji, bħal alkalini, karbonju-żingu, jew batteriji rikarikabbli.
• Neħħi u immedjatament irriċikla jew armi l-batteriji minn tagħmir mhux użat għal perjodu estiż ta' żmien skont ir-regolamenti lokali.
• Dejjem waħħal kompletament il-kompartiment tal-batterija. Jekk il-kompartiment tal-batterija ma jagħlaqx sew, waqqaf l-użu tal-prodott, neħħi l-batteriji, u żommhom 'il bogħod mit-tfal.

Mistoqsijiet Frekwenti