LED Kontrollur
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Parametri Tekniċi

Mudell	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
Kulur	Abjad	Iswed	Abjad	Iswed	Abjad	Iswed	Abjad	Iswed
Tip li Jbaxxi	DIM		CT		RGB/ RGBW		RGBCW
Tip bla fili	RF 2.4GHz
Vol tax-xogħoltage	3Vdc (Button battery CR2032×1)
Kurrent standby	＜ 2uA
Distanza mill-bogħod	30M (Under unobstructed conditions)
Kontrolluri Kompatibbli	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
Temp tax-xogħol.	-25 ℃ ~ 50 ℃
Piż	40g±10g
Dimensjonijiet	104×58×9mm (remote)，108×63×14mm (remote+hold)

Dimensjonijiet

Installazzjoni tal-Prodott

Żewġ modi kif tiffissa d-detentur remot:

1. Waħħal id-detentur remot fil-ħajt b'żewġ viti.
2. Waħħal id-detentur remot fil-ħajt b'adeżiv 3M.

Batterija ta 'sostituzzjoni

Funzjonijiet tal-buttuna

Dimming Remote Control M1C/M1D

Żona 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Żona 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Funzjonijiet tal-buttuna
RGB/RGBW Remote Control M4C/M4D

Żona 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Żona 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

Kulur	R/G/B values
Aħmar	R100%   G0%   B0%
Isfar	R100%   G100%   B0%
Aħdar	R0%   G100%   B0%
Ċjan	R0%   G100%   B100%
Blu	R0%   G0%   B100%
Vjola	R100%   G0%   B100%
Abjad	R100%   G100%   B100%

Modalità dinamika	Red-purple gradient	Modalità statika	Aħmar
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		Aħdar
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		Blu
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Isfar
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		Vjola
	Three-color gradient (RGB)		Ċjan
	White gradually brightens and darkens		Mixed light white

Dijagramma tal-Wiring

Used with P-series controllers

Tqabbil tal-Kodiċi
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Nota: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Kodiċi ċar
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Kodiċi ċar
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Status tad-Dawl Indikatur

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Nota: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Trasport u Ħażna

1. Trasport
   Il-prodotti jistgħu jintbagħtu permezz ta' vetturi, dgħajjes u ajruplani.
   Waqt it-trasport, il-prodotti għandhom ikunu protetti mix-xita u mix-xemx. Jekk jogħġbok evita xokk qawwi u vibrazzjoni matul il-proċess tat-tagħbija u l-ħatt.
2. Ħażna
   Il-kundizzjonijiet tal-ħażna għandhom ikunu konformi mal-Istandards Ambjentali tal-Klassi I. Il-prodotti li ilhom maħżuna għal aktar minn sitt xhur huma rakkomandati li jerġgħu jiġu spezzjonati u jistgħu jintużaw biss wara li jkunu ġew kwalifikati.

Attenzjonijiet

• Jekk jogħġbok uża f'ambjent ta 'ġewwa niexef;
• Meta tinstalla l-batterija, jekk jogħġbok qabbad it-terminal pożittiv u negattiv b'mod korrett. Jekk il-remote mhux se jintuża għal perjodu twil, ħu l-batterija barra;
• Meta d-distanza remota titqassar u jew ir-remot ma jaħdimx ta 'spiss, jekk jogħġbok ibdel il-batterija fil-ħin;
• Jekk jogħġbok ħudha bir-reqqa u poġġiha biex tevita waqgħat li jikkawżaw ħsara;
• Jekk isseħħ xi ħsara, jekk jogħġbok tippruvax tirranġa l-prodotti waħdek. Jekk għandek xi mistoqsija, jekk jogħġbok ikkuntattja lill-fornituri tiegħek.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Ftehim ta 'Garanzija

• Perjodi ta' garanzija mid-data tal-kunsinna: 5 snin.
• Servizzi ta' tiswija jew sostituzzjoni b'xejn għal problemi ta' kwalità huma pprovduti fi ħdan perjodi ta' garanzija.

Esklużjonijiet tal-garanzija hawn taħt:

Il-kundizzjonijiet li ġejjin mhumiex fil-firxa ta' garanzija ta' servizzi ta' tiswija jew sostituzzjoni b'xejn:

• Lil hinn mill-perjodi ta' garanzija;
• Kwalunkwe ħsara artifiċjali kkawżata minn voltage, tagħbija żejda, jew operazzjonijiet mhux xierqa;
• Prodotti bi ħsara fiżika severa;
• Ħsara kkawżata minn diżastri naturali u force majeure;
• It-tikketti tal-garanzija u l-barcodes ġew imħassra.
• No any contract signed by our company.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

TWISSIJA

• PERIKLU TA' INĠESTJONI: Dan il-prodott fih batterija tal-buttuni jew munita.
• MEWT jew korriment serju jistgħu jseħħu jekk jinbelgħu.
• Ċellula tal-buttuni jew batterija tal-munita li tinbelgħu jistgħu jikkawżaw Ħruq kimiċi Interni f'inqas sagħtejn.
• ŻOMM batteriji ġodda u użati FEJN MA JINTLAĦAQX MIT-TFAL
• Fittex attenzjoni medika immedjata jekk batterija tkun suspettata li tinbela' jew tiddaħħal ġewwa kwalunkwe parti tal-ġisem.

a) Neħħi u immedjatament irriċikla jew armi l-batteriji użati skont ir-regolamenti lokali u żommu 'l bogħod mit-tfal. TARMIX il-batteriji fit-trash tad-dar jew inċinera.
b) Anke batteriji użati jistgħu jikkawżaw korriment gravi jew mewt.
c) Ċempel ċentru lokali għall-kontroll tal-veleni għal informazzjoni dwar it-trattament.
d) The compatible battery type: CR2032.
e) Il-volum nominali tal-batterijatage: 3Vdc.
f) Batteriji mhux rikarikabbli m'għandhomx jiġu ċċarġjati mill-ġdid.
g) Tisforzax tarmi, recharge, disassemble, saħħan 'il fuq (il-klassifikazzjoni tat-temperatura speċifikata tal-manifattur) jew inċinera. Jekk tagħmel hekk tista 'tirriżulta fi korriment minħabba venting, tnixxija jew splużjoni li tirriżulta fi ħruq kimiku.
h) Kun żgur li l-batteriji huma installati b'mod korrett skont il-polarità (+ u -).
i) Tħallatx batteriji qodma u ġodda, marki differenti jew tipi ta' batteriji, bħal batteriji alkalini, karbonju-żingu, jew batteriji rikarikabbli.
j) Neħħi u immedjatament irriċikla jew armi l-batteriji minn tagħmir mhux użat għal perjodu estiż ta' żmien skont ir-regolamenti lokali.
k) Dejjem waħħal kompletament il-kompartiment tal-batterija. Jekk il-kompartiment tal-batterija ma jagħlaqx sew, waqqaf l-użu tal-prodott, neħħi l-batteriji, u żommhom 'il bogħod mit-tfal.

Dokumenti / Riżorsi

LTECH M1C Wireless Controller [pdfManwal tal-Istruzzjonijiet M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

Referenzi

• Manwal għall-Utent