Fender Quantum HD Software User Manual

Fender Quantum HD Software

Speċifikazzjonijiet

• Product Name: Quantum HD Series
• Tip ta' Interfaċċja: Interfaċċja tal-Awdjo
• Manufacturer: Fender
• Kompatibbiltà: Windows, macOS
• Konnessjoni: USB-C

Fuqview

• This Software User Manual details how to use Universal Control to control Quantum HD audio interface. Before jumping in, make sure you’ve registered your device and installed Universal Control, as it provides updates and upgrades for your Quantum interface.
• For more information about the Quantum HD, including hardware features, hookup diagrams, and getting started with the interface, please review il-manwal tas-sid Quantum tiegħek.

Proċess ta' Reġistrazzjoni u Installazzjoni tal-Prodott
Your Quantum HD huwa interface awdjo b'saħħtu, mgħobbi b'għodod tal-awdjo professjonali u kontrolli ta 'monitoraġġ flessibbli. Qabel ma tikkonnettja ma 'kompjuter, jekk jogħġbok żur www.fender.com and navigate to the Quantum HD product page to verify the latest system requirements for your interface. Once you’ve verified that you meet the latest system requirements, follow these steps:

1. Visit My.Fender.com and create or log into your user account.
   • Note: If you have previously created a MyPreSonus account, you can use these credentials on MyFender.com to log in. All of your previous registered PreSonus products will be available from the new unified MyFender account experience.
2. At the top of your MyFender homepage, click onto the “Register Products” button. After clicking, a dialog window will appear.
3. From the dialog window, specify the date you purchased the interface and the serial number on your interface. After you’re done,click “Register.”
4. After clicking Register, another dialog window will appear where you can initiate your Fender Studio Pro downloads.
5. To download Universal Control, navigate to the Quantum HD product page from your MyFender homepage.

Nota:
The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will greatly affect the overall performance of your recording system. A faster processor and more RAM can reduce signal latency (delay) and improve overall performance.When connecting to Universal Control, you have two options:

• Connect and sync your Quantum HD interface to your desktop via USB-C connection. This option allows you to use Universal Control while recording and playing back audio through Fender Studio® Pro or a third-party DAW of your choice.
• Connect your desktop, Apple iOS / Android device, or iPad to the same wireless network. This option will allow you to use any or all of these devices to remote control your Quantum interface anywhere in the studio or venue.

The following sections detail the Universal Control installation process for Windows, Mac, iPad, and Apple iOS / iPadOS /
Apparat Android.

Nota:
Make sure your Quantum interface firmware version is up to date from your computer before connecting to the device any other way.

Installazzjoni ta 'Kontroll Universali għall-Windows

• Qabbad l-interface Quantum tiegħek ma' port USB-C disponibbli u tniedi l-installatur. L-installatur tal-Kontroll Universali jmexxik minn kull pass tal-proċess tal-installazzjoni.
• This application will install the ASIO drivers. Please read each message carefully. It is recommended that you quit all applications before you start the installation.

Installazzjoni ta 'Kontroll Universali għal macOS

• Qabbad l-interface Quantum tiegħek ma' port USB-C disponibbli u tniedi l-installatur. L-installatur tal-Kontroll Universali jmexxik minn kull pass tal-proċess tal-installazzjoni.
• L-apparati tas-serje Quantum jeħtieġu sewwieq tad-dwana. Dan is-sewwieq huwa inkluż fl-app Universal Control.
• Wara l-installazzjoni u t-tnedija tal-Kontroll Universali, is-sigurtà tal-macOS tista’ tqanqlek biex “Japprova l-Estensjoni tas-Sistema tas-Sewwieq tal-Awdjo”.
• For macOS 15/26 Users: Open System Settings → General → Login Items & Extensions → click the “i” icon next to Universal Control.
• Is-sistema operattiva tagħtik l-għażla ta '"OK" jew "Settings tas-Sistema Miftuħa." Agħżel "Settings tas-Sistema Miftuħa", jew jekk diġà għafast "Ok", iftaħ Settings tas-Sistema > Privatezza u Sigurtà.
• Nota għall-utenti macOS: Meta l-installazzjoni tkun kompluta, issib l-applikazzjoni tal-Kontroll Universali fil-folder tal-Applikazzjonijiet tiegħek. Huwa rakkomandat li tpoġġi dan fil-Dock tiegħek għal aċċess faċli.

Għall-Utenti ta' macOS 12/13:

• Agħżel "App Store u żviluppaturi identifikati" jekk dan ma jkunx diġà stabbilit. Agħżel "Ħalli" sabiex il-Kontroll Universali jkun jista 'jżid is-sewwieq Quantum. Daħħal il-password tas-Sistema tiegħek kif mitlub.

Għall-Utenti ta' macOS 14:

• Agħżel "App Store u żviluppaturi identifikati" jekk dan ma jkunx diġà stabbilit. Ikklikkja “Dettalji”.
• Agħżel il-metodu ta' awtentikazzjoni tiegħek.
• Attiva l-Għażliet ta' Kontroll Universali u kklikkja OK.
• Issa lest biex tuża l-Quantum il-ġdid tiegħek!

Universal Control Installation for Apple iOS / iPadOS / Android
To remote control your Quantum interface with Apple iOS / iPadOS / Android devices, you must first locate and install the Universal Control application onto your Apple iOS / iPadOS / Android device from your app store. Once downloaded, you can use Universal Control with an Apple iOS / iPadOS / Android device by connecting to the same wireless network as the computer that is connected via USB to your Quantum interface.

Jekk jogħġbok Innota:
Quantum interface firmware can only be updated from your computer. Firmware updates from Universal Control are not available from Apple iOS / iPadOS / Android mobile devices.

iPadOS Low Latency Driver

• When using the latest iPad Air M3 and iPad Pro M5, round trip lag (latency) can be reduced by up to 40% (2-3ms less latency) by enabling the Quantum USB Audio Driver from your iPad settings. Once Universal Control is installed on your iPad, navigate to iPadOS’s Settings > Apps > Universal Control and turn on the Quantum USB Audio Driver.
• Note: This driver only applies to Apple iPadOS 18+. Not applicable to any earlier iPadOS versions nor any version of Android.

Mobile Compatibility Modes

• Due to limitations to some operating systems, the Quantum HD includes various mobile modes, which allows it to be used on Android devices with Android version 14 or later.

When using Quantum HD with a device that has Android 14+, ensure that the correct mobile mode is selected. To change modes from your Quantum HD, press and hold  the knob until the “Settings” screen appears. Navigate to “Mobile Mode” (shown as “Device Mode” in Universal Control), then press the knob to select a mode.

• Off: Use this mode for macOS, Windows, and iOS / iPadOS devices (no channel or sample rate limitations).
• Android: Use this mode for Android OS 14+ devices. This option is best for most applications and supports 2 (QHD 2) or 8 (QHD 8) input channels.
• Android+: This mode is also used for Android OS 14+ devices (for use with specific applications that can access full channel counts).

Nota:
Il-massimu sample rate possible for both Android and Android+ modes is 48 kHz.

Kontroll Universali

• Universal Control is both a driver-management utility and software control interface for your Quantum Interface

Il-Kontroll Universali jipprovdi dan li ġej:

• Hardware Control. All of Quantum’s front panel hardware controls can be adjusted using Universal Control, facilitating easy hardware manipulation even if Quantum is installed in a location out of reach of the computer operator.
• Monitoraġġ b'Latenza Baxxa. L-użu tal-Kontroll Universali jelimina l-latency assoċjata mal-buffering tad-DAW I/O li jagħmel il-monitoraġġ problematiku għall-artist. Billi tneħħi għal kollox il-karatteristika tal-monitoraġġ tal-input tas-softwer tad-DAW mill-fluss tas-sinjal tal-monitoraġġ, il-ħtieġa li jiġu aġġustati d-daqsijiet tal-buffer I/O u l-latenza m'għadhiex kwistjoni.
• Ibgħat / Cue Xarabankijiet. Kontroll Universali għandu stereo aux buses, b'livelli indipendenti ta 'bagħtu għal kull input.
• Ġestjoni tal-Konfigurazzjoni (Xeni). Il-konfigurazzjonijiet tal-Kontroll Universali jistgħu jiġu ssejvjati u mgħobbija lejn / mid-disk bħala Xeni, għal ġestjoni tas-sessjoni konvenjenti u illimitata.

Universal Control has two main components: the Start and the Mixer pages. We’ll go into more detail about each in the sections below.

Universal Control Start Page
Universal Control contains driver support, software control, monitor mixing, and firmware management for Fender and PreSonus hardware. After opening Universal Control, you will see the Launch window. From this window, you can manage all the driver settings.

• Sample Rata. Tibdel is-samprata le. Tista 'tissettja l-sample rata għal 44.1, 48, 88.2, 96, 176.4, jew 192 kHz. A ogħla sample rata se żżid il-fedeltà tar-reġistrazzjoni, iżda dan se jżid ukoll il- file daqs u l-ammont ta 'riżorsi tas-sistema meħtieġa biex jipproċessaw l-awdjo.
• Sors tal-Arloġġ. Issettja s-Sors tal-Arloġġ Diġitali. Minn dan il-menu, tista 'tissettja s-Sors tal-Arloġġ għall-interface Quantum HD tiegħek. Intern, Estern S/PDIF, Esterni ADAT, jew Wordclock (Quantum HD 8 Biss).
• Buffer Size (Windows only). Sets the Buffer Size. From this menu, you can set the Buffer Size for your Quantum HD interface from 16 to 2048 samples. Lowering the buffer size will reduce the overall latency. However, this will also increase performance demands on your computer. In general, you will want to set the buffer size as low as your system can safely support. If you begin to hear pops, clicks or distortion in your audio path, try raising the buffer size.
• Device Mode (HD8 only): Displays the current device mode.
• Input Format. Details your device, input channels, and bitrate.
• Format tal-output. Dettalji l-kanali tal-ħruġ tat-tagħmir tiegħek u l-bitrate.
• Firmware. Juri l-verżjoni tal-firmware attwali.
• Numru tas-serje. Juri n-numru tas-serje Quantum tiegħek.

Tnedija tal-Mixer tal-Kontroll Universali
Universal Control’s Mixer can be launched from the Universal Control application (Start Page).

1. Iftaħ Kontroll Universali.
2. From the Universal Control Start Page, click on the product card for the Quantum HD Control Panel (mixer).
3. Il-Mixer tal-Kontroll Universali jinfetaħ f'tieqa oħra.

Jieqaf mill-Kontroll Universali

Għall-utenti ta' macOS:

• Agħżel "Quit Universal Control" mill-MacOS Applikazzjoni Menu meta Universal Control hija l-applikazzjoni tat-tagħrif miksub.
• Uża l-shortcut standard tat-tastiera macOS: Kmand + Q.

Għall-utenti tal-Windows:

• Ikklikkja l-buttuna "X" tagħlaq fil-Bar tat-Titolu tat-Tieqa.

Mixer tal-Kontroll Universali
Universal Control’s layout and functionality is similar to what is found on analog mixers and shares many elements with Fender Studio Pro’s mixer layout.

Bar tan-Navigazzjoni
The navigation bar has two options to choose from:

• Scenes. Shows / Hides the Scenes panel. See section 2.2.7 Scenes for more information about how to use this feature.
• Panel tas-Settings. Juri / Jaħbi l-pannell tas-Settings (jissostitwixxi l-mixer). Ara t-taqsima 2.2.8 Settings Panel għal aktar informazzjoni dwar kif tuża din il-karatteristika.
• Power Button. Turns the mixer on or off. Turning the mixer “off” bypasses the mixer in Universal Control, which can be helpful if you would like to mix and create cue mixes directly in the DAW.

Channel Overview

Inputs tal-Kanal

• Kull strixxa ta 'input tal-kanal tikkontrolla input ta' hardware Quantum korrispondenti jew input virtwali. L-output tal-inputs kollha tal-kanal huma dejjem diretti lejn l-outputs Main 1 u 2 (ħlief meta siekta). L-inputs jistgħu jintbagħtu b'mod fakultattiv lejn outputs oħra permezz ta' Sends u l-kontrolli FlexChannel. L-inputs tal-kanal tal-Kontroll Universali huma essenzjalment l-istess għall-inputs kollha; madankollu, hemm xi differenzi fost l-inputs analogi u diġitali kif innutat hawn taħt.

Kontrolli tal-Input tal-Kanal

• High Pass Filter (HPF). Engages/disengages an HPF at 80 Hz with a slope of 12 dB per octave.
• 48V. Tqabbad / disengage power phantom 48V għall-użu ma 'mikrofoni tal-kondensatur.
• Autogain. Issettja awtomatikament il-gwadann għall-kanal magħżul.
• Pad. Cycles through -20 dB or no pad attenuation (default). Pad does not affect the Line or Instrument inputs.
• Preamp Gwadan Livell. Uża dan il-kontroll biex issettja l-gwadann (0 dB sa +75 dB) għall-mikrofonu jew l-istrument tiegħek.
• Line Input Level. If a line-level signal is connected through the TRS port of the combo jack, then preamp il-kontroll tal-gwadann jaqleb għal kontroll tal-Livell tal-Linja (-12 dB sa +12 dB).
• Ikseb il-Valur. Juri l-valur assolut għall-Gwadan kurrenti. Ikklikkja darbtejn fuq il-valur biex tidħol valur speċifiku.

Tibgħat
Controls the send level of the audio being sent to the Return FlexChannel. Depending on your hardware, different amounts of outputs will be available as Sends. Loopback virtual outputs can be shown in Settings as well (see section 2.2.8 Settings Panel).

• Ibgħat id-Destinazzjoni. Juri l-par output li l-awdjo qed jintbagħat.
• Ibgħat il-Livell. Jikkontrolla l-livell ġenerali li qed jintbagħat lil par output.
• Note: If Speaker Switching is active, outputs 3 – 4 will be disabled for Sends.

Mixer tal-Kontroll Universali

Ħallat Kontrolli

• Pan. Issettja l-pożizzjoni pan għas-sinjal f'taħlita stereo (japplika wkoll għal Sends).
• Mute. Isikket is-sinjal (japplika wkoll għal Sends).
• Solo. Isselli s-sinjal (isikket il-kanali l-oħra kollha fil-Main Mix).
• Toggle Mono / Stereo Link. Tgħaqqad 2 kanali maġenb l-istess tip f'kanal stereo.
• Valur tal-Livell Kurrenti. Juri l-valur assolut għal-livell attwali. Ikklikkja darbtejn fuq il-valur biex tidħol valur speċifiku.
• Miter tal-Kanal. Juri l-livell attwali tal-mikrofonu jew l-istrument pre-fader tiegħek.
• Fader tal-Kanal. Jikkontrolla l-livell ġenerali tal-kanal fil-Main Mix.
• Numru tal-Kanal. Jindika n-numru tal-kanal.
• Ikona tal-Kanal. Agħżel minn lista ta' ikoni għall-kanal
• Isem tal-Kanal. Ikklikkja darbtejn biex toħloq isem personalizzat għall-kanal.
• Kulur tal-Kanal. Ikklikkja fuq l-ispazju biex turi l-għażliet tal-kulur tal-kanal.

Ritorn FlexChannel
Il-kanali tal-input huma dejjem diretti lejn l-Outputs Prinċipali 1 u 2. Madankollu, l-inputs jistgħu jintbagħtu b'mod fakultattiv lejn kwalunkwe output tal-ħardwer disponibbli jew fluss Loopback permezz ta' Sends u l-FlexChannel.

• Ritorn Agħżel. Jagħżel ir-Ritorn jew Loopback Stream li għandu jiġi kkontrollat ​​mill-istrixxa tal-kanal.
• Copy / Paste Mix: Copying the current mix allows you to quickly set up multiple mixes. Right-click on the fader for copy and paste options.
• Fader Flip: When Flip is activated, fader controls switch to represent the per-channel Send levels of the chosen Send destination. Faders will change to green to indicate Flip is active; when activated, the fader controls the send level rather than the channel volume.
• Mute. Issikket ir-Ritorn jew il-fluss Loopback magħżul.
• Telefowns Isma. Tista' tisma' kwalunkwe taħlita billi tikklikkja fuq l-ikona tal-headphone. Dan se jindirizza t-taħlita magħżula għall-Headphone 1 (jekk aktar minn headphone wieħed), sabiex tkun tista 'taħdem it-taħlitiet tal-cue tiegħek.
• Toggle Mono / Stereo. Jiddawwar il-kanal bejn kanal stereo jew kanal mono miġbur.
• Valur tal-Livell Kurrenti. Juri l-valur assolut għal-livell attwali. Ikklikkja fuq il-valur biex iddaħħal valur speċifiku.
• Miter tal-Kanal. Juri l-livell attwali.
• Fader tal-Kanal. Jikkontrolla l-livell ġenerali għall-fluss Ritorn jew Loopback magħżul.
• Ikona tal-Kanal. Agħżel minn lista ta' ikoni għall-kanal
• Isem tal-Kanal. Ikklikkja darbtejn biex toħloq isem personalizzat għall-kanal.
• Kulur tal-Kanal. Ikklikkja fuq l-ispazju biex turi l-picker tal-kulur.

Monitor Kontrolli
L-istrixxa tal-Kontroll tal-Monitor fiha elementi relatati mal-Outputs Prinċipali, Headphones, u Swiċċjar tal-Ispeaker.

• Main Out Livell. Dan huwa l-kontroll tal-livell ewlieni għall-Outputs Prinċipali 1 u 2 ta 'Quantum. Huwa jwettaq l-istess funzjoni bħall-Pum fuq il-pannell ta' quddiem jew ta 'fuq ta' Quantum.
• Headphone Level. These is the level controls for Headphone Output 1 and 2. It performs the same function as the Knob on Quantum’s front or top panel when the Knob is switched to Headphone control. The Quantum HD 2 only has one headphone output.
• Dim. Inaqqas il-Ħruġ Prinċipali bl-ammont stabbilit f'Settings (default huwa -10 dB)
• Toggle tal-Ispeaker Switching. Meta l-Ispeaker Switching huwa attiv, jinbidel jew għal sett ta' kelliema A jew sett ta' kelliema B. Innota li din l-għażla mhix disponibbli u hija griża b'mod awtomatiku.
• Mute. Ijattiva l-Output Prinċipali. Il-mute ma jaffettwax il-headphones.
• Telefowns Isma. Dan se jmur it-taħlita Prinċipali (outputs 1 / 2) għal Headphone 1.
• Level Value. Displays the absolute value for the current level. Click on the value to enter a
  valur speċifiku.
• Monitor Meters. Dawn il-meters juru l-livelli tas-sinjali tal-linja tat-taħlita tal-monitor eżatt qabel il-kontroll tal-livell tal-monitor.
• Fader tal-Kanal. Jikkontrolla l-livell ġenerali għall-outputs Prinċipali. Dan il-kontroll tal-volum huwa indipendenti mill-encoder Prinċipali. Jekk il-fader jintefa 'l isfel, l-awdjo ma jgħaddix għall-kontroll tal-volum prinċipali.
• Numru tal-Kanal. Jindika n-numri tal-kanal.
• Channel Icon. Choose from a list of icons for the channel. All Icons can be shown/hidden from the Settings panel.
• Isem tal-Kanal. Ikklikkja darbtejn biex toħloq isem personalizzat għall-kanal.
• Kulur tal-Kanal. Ikklikkja fuq l-ispazju biex turi l-picker tal-kulur. Il-kanal kollu jista 'jiġi kkulurit fis-Settings.

Xeni
Kontroll Universali jippermettilek li toħloq u taħżen librerija ta '"xeni". Xena hija bħal stampa tat-taħlita tiegħek: Taħżen kull parametru tal-kanal għal kull input analogu, kif ukoll il-pożizzjoni ta 'kull fader, it-taħlitiet aux, mutes u solos tal-kanal, eċċ.

Ix-xeni jipprovdu metodi għall-ġestjoni tal-konfigurazzjonijiet tal-mixer tal-Kontroll Universali bħala ssettjati minn qabel files. When a Universal Control Scene is saved, the current Universal Control configuration is saved to your computer. When a Scene is subsequently reloaded, Universal Control is returned to the same configuration state, regardless of any changes to Universal Control that were made in the interim.

• Ikona tax-Xeni ( ): Select to open (blue) and close (gray) the Scenes window.
• Save: Saves the current mixer configuration to the selected Scene (overwrite).
• Load: Loads the selected Scene (double-clicking the chosen Scene will also load it).
• Store Scene: Click the plus icon to save the current mixer configuration and give it a name.
• Delete Scene: Deletes the selected Scene.

Panel tas-Settings
Il-parametri globali għall-Kontroll Quantum u Universali huma kkonfigurati fil-pannell tas-Settings:

Hardware Settings:

• Sends. Changes which outputs are available for Sends (For more information, check out Section 3.1.2).
• Main Encoder. Select which speaker(s) are controlled by the knob.
• Qlib tal-Ispeaker. Agħżel l-imġieba għall-bidla tal-kelliem meta tagħfas il-buttuna tal-Kontroll Prinċipali.
• Headphone Source Selector (“HP Source”). Selects the source for the Headphone Output 1 or 2. Access to certain headphone sources is dependent on the Quantum model.
• S/PDIF Output Source. Selected which source is sent out of the S/PDIF RCA port.
• Mute Button Imġieba. Agħżel jekk il-buttuna Mute tal-pannell ta 'fuq jew ta' quddiem tiddejjaqx l-awdjo fl-outputs Prinċipali, jew Tnaqqas l-awdjo.
• Ammont Dim. Jaġġusta kemm dim jiġi applikat meta Dim ikun imqabbad (default huwa -10 dB)
• Luminożità LED. Jaġġusta l-luminożità ġenerali tal-LEDs kollha (default huwa 100%)
• Irrisettja l-Fabbrika. Jirreset il-parametri kollha għall-issettjar tal-fabbrika.

Issettjar tal-UI:

• Colorize Kanali. Japplika l-kulur tal-kanal magħżul bħalissa għall-Istrixxa tal-Kanal kollu.
• Peak Hold. Jitfa' jew jitfi Peak Hold.
• Show all Digital (Quantum HD only). Shows or hides all ADAT and S/PDIF inputs in the mixer. Hidden by default.
• Show all Loopback. Shows or hides all Loopback Inputs, Stream Mix Sends, and Flex Mix Stream Mixes in the mixer. Hidden by default.
• Edit Popup: Shows or hides the popup editor.
• Tħassir tal-meter. Issettja l-Meter Decay għal jew Bil-mod, Medju, jew Mgħaġġel.

Bl-użu tal-Mixer tal-Kontroll Universali

Loopback
Loopback audio is the industry term for routing audio from one application to another. Applications that use audio interfaces, like your Quantum interface, are designed to receive audio from one audio device and send audio to one audio device. This means that most applications can only send to and receive from an audio interface, but not from other applications. This can present a challenge in certain situations. Fortunately, Quantum HD audio interfaces allow you to take audio from any of Universal Control’s mixer inputs (mics, guitars, computer audio, etc.) and send the combined audio to another application for the purpose of recording or live streaming.

Kif tuża Loopback
Jekk tixtieq tuża l-karatteristika Loopback, segwi d-direzzjonijiet hawn taħt:

1. Make sure that your Quantum HD is selected as the Windows or macOS playback device.
2. In your DAW or software application, choose the channel input labeled Loopback 1 or Loopback 2. Any audio sent to Loopback 1 or 2 will be available as a virtual input in your DAW or other software applications (not all software applications support multichannel inputs).
   Note: Loopback inputs are disabled at sample rati ta' 176.4 u 192 kHz.
3. In Universal Control’s mixer window, adjust the send level to whichever Loopback send you’ve selected in Fender Studio Pro.
   • Loopback 1 Ibgħat Livell. Aġġusta l-ammont ta 'awdjo li tixtieq tibgħat lill-fluss Loopback 1.
   • Loopback 2 Ibgħat Livell. Aġġusta l-ammont ta 'awdjo li tixtieq tibgħat lill-fluss Loopback 2.
4. Wara li taġġusta l-livell tal-mibgħat Loopback, tinduna li l-livelli tal-metraġġ jidhru fid-DAW jew il-kanal tal-applikazzjoni tas-softwer li waqqaft. Ladarba jidher il-kejl, inti lest biex tibda tirrekordja l-awdjo.

TWISSIJA:
Kun żgur li l-kanal fid-DAW tiegħek huwa siekta qabel ma tirrekordja l-attivazzjoni biex tevita linji ta' feedback.

Quantum Multichannel
Multichannel is a hardware and software operating mode that can be configured using Universal Control. Quantum HD 2 and HD 8 interfaces can be used as an all-in-one monitoring hub for some multichannel formats (depending on the amount of analog outs per device).
Meta tintgħażel modalità b'ħafna kanali, il-pum jikkontrolla l-volum tal-kelliem korrispondenti kollu f'daqqa. Għal aktar informazzjoni dwar kull waħda mill-għażliet Multichannel, review il-lista hawn taħt:

• None: Knob control is disabled and unity audio will be sent out of all outputs.
• All: The knob will control the output volume for all outputs at the same time.
• 1 – 2: The default Main Encoder mode. The knob will control the output volume for Main Outputs 1 and 2.
• 1 – 4: The knob will control the output volume for Outputs 1, 2, 3, and 4 all at the same time.
• 1 – 6 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, and 6 all at the same time.
• 1 – 8 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, 6, 7, and 8 all at the same time.
• All + ADAT: The knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.

TWISSIJA:
Full-scale audio will be sent out of Main Outputs 1 and 2. Main Outputs 1 and 2 will be muted when this mode is selected to avoid damaging speakers or other equipment.

Using Your Quantum Interface

Bħala Interface Awdjo

• The Quantum HD functions like other audio interfaces when used without the Universal Control application installed. Quantum HD’s class-compliant (macOS) and WDM drivers (Windows) enable it to be used for computer audio I/O routing with any compliant software with some limitations.

Użu waħdu (HD 8 ADAT Preamp Espansjoni)
The Quantum HD 8 can be used to add mic pres to another Quantum HD running in audio interface mode (with Universal Control installed) or a third party audio interface that supports ADAT optical inputs as well as S/MUX and its variants. To use a second or third Quantum HD as a standalone preamp through ADAT, access the secondary or tertiary Quantum HD’s Global Settings when not connected to a computer and set the Standalone mode to “ADAT.” By default, this mode is set to “Mixer.”

• As long as the additional HD 8 is put into ADAT mode, and the clock source is set to externally clock via SPDIF, ADAT, or Word Clock, the 48V and Gain Knob controls will be present at the top of each ADAT fader.
• Note: When in ADAT mode, the knob of the HD 8 expansion will no longer control volume and will blink 3 times if turned in either Main or Headphone control modes.
• The knob will still control gain level if a channel is selected.
• If you select “All + ADAT” from the Main Encoder settings, the knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.
• Note: As with any of the other Main Encoder link modes, as outputs get assigned to be controlled by the knob, those outputs paths become unavailable as Sends for cue mix routing, etc.

 Send Routing Options
Quantum HD interfaces have two send options located in the Universal Control settings panel. Depending on which option is selected, ADAT Sends and computer playback channels (ex., USB 5/6) will become available or unavailable. In either mode, Loopback 1 and Loopback 2 are available as Sends on any input channel.

• Analog Out (default). When analog out is selected, Sends can only be routed to the physical analog outputs of Quantum (for example, Out 3/4, Out 5/6, etc.). When this option is selected, ADAT signals can be easily routed from your DAW.
• Analog + ADAT. When Analog + ADAT is selected, the mixer is reconfigured so that all analog and ADAT outputs are available as Sends on input channels. When this option is selected, the computer playback input channels (USB 5 – 10) will no longer be available in UC’s mixer and all ADAT signal routing must be done through Universal Control. In other words, ADAT will not pass if routed from a DAW.

NOTA:
Fl sample rates greater than 96 kHz, all digital inputs are disabled as well as Loopbacks 1 and 2.

Bil-Kontroll Universali

• Quantum HD and Universal Control can be used without a DAW or any other software. Using Universal Control without a DAW provides access to all Quantum HD functionality and simplifies the use of Quantum HD’s digital mixing and monitoring when a DAW is not needed.

Ismijiet tas-sewwieqa Quantum I/O

• Each Quantum input and output has a channel number and name provided by the Quantum HD drivers on macOS and Windows. If an audio software application can access Core Audio / ASIO devices directly, it may be possible to designate specific inputs and/or outputs within the application.

Settings Universali tal-Kontroll li jinżammu wara ċ-Ċiklu tal-Enerġija

• All currently active Main Mix settings (channel volume level, pan position, solo, mute, and stereo link) and monitor settings (main and headphone output levels) are saved to internal firmware before your Quantum HD are powered down, and recalled when power
  is reapplied.

Nota:
Il-bidliet ma jiġux salvati istantanjament. Jekk jogħġbok ħalli sa 10 sekondi biex is-settings jiġu ssejvjati fuq l-apparat qabel ma titfi.

B'DAW (mingħajr Kontroll Universali)

• Meta jintuża ma 'DAW iżda mingħajr l-applikazzjoni ta' Kontroll Universali, id-DAW jikkontrolla r-rotot I/O tas-sinjal kollu u l-monitoraġġ tas-softwer.

Monitoraġġ bid-DAW

• Il-funzjoni primarja tal-Kontroll Universali hija l-monitoraġġ tal-inputs ta' Quantum waqt il-prestazzjoni live. Meta l-monitoraġġ tas-softwer ikun attivat fid-DAW, il-monitoraġġ tal-input tal-Kontroll Universali għandu jiġi diżattivat biex jiġu eliminati s-sinjali rduppjati.
• Make sure to disable input monitoring in Universal Control when software monitoring via the DAW. If Universal Control’s input monitoring isn’t disabled (muted channel, fader down, or bypassed mixer), phasing and/or doubling of the monitored signal(s) will occur because the input signal is being heard twice – first from the low-latency DSP mix (Universal Control) and shortly thereafter from the higher latency software mix (DAW).

Kif tiddiżattiva l-monitoraġġ tal-input fil-Kontroll Universali

• Biex tiddiżattiva l-monitoraġġ tal-input fil-Kontroll Universali meta tuża l-monitoraġġ tas-softwer fid-DAW, iftaħ il-Kontroll Universali u waqqaf il-kanali kollha tal-input fi ħdan il-Kontroll Universali jew attiva "Bypass Mixer" fis-Settings. Il-Kontroll Universali jista' mbagħad jingħalaq.
• L-użu ta 'DAW mingħajr Kontroll Universali huwa fluss tax-xogħol tipiku waqt it-taħlit, fejn il-monitoraġġ ta' latenza baxxa mhuwiex meħtieġ u l-latenza tal-buffering mhijiex kwistjoni minħabba li l-binarji huma diġà rreġistrati. Meta tirreġistra binarji ġodda, il-fluss tax-xogħol tad-DAW u tal-Kontroll Universali (kif deskritt fit-taqsima li ġejja) huwa rakkomandat.
• F'dan ix-xenarju, Quantum jiffunzjona bħala interface awdjo. Id-DAW taċċessa u ddawwar l-I/O tal-interface tal-awdjo ta' Quantum permezz tas-sewwieqa tal-apparat. Il-latenza tal-I/O tal-awdjo hija determinata mill-issettjar tad-Daqs tal-Buffer tal-I/O.

B'DAW (bil-Kontroll Universali)

• Il-Kontroll Universali jintuża fl-istess ħin ma' DAW meta jkun mixtieq monitoraġġ b'latenza baxxa. Dan il-fluss tax-xogħol jelimina kompletament il-latenzi tal-buffering I/O assoċjati mal-monitoraġġ tas-softwer. F'dan ix-xenarju, il-Kontroll Universali jintuża biex jikkontrolla l-monitoraġġ kollu tad-dħul meta jirreġistra, u l-karatteristika ta 'monitoraġġ tas-softwer tad-DAW għandha tkun diżattivata.

Monitoraġġ tas-Softwer versus Monitoraġġ tal-Hardware

• Il-monitoraġġ tas-softwer (li jisimgħu l-inputs ħajjin permezz tal-mixer DAW) għandu latency dixxernibbli minħabba l-buffering tal-I/O tal-interface tal-awdjo. Il-monitoraġġ tal-ħardwer permezz ta' mixer DSP intern ta' interface tal-awdjo (eż., l-applikazzjoni tal-Kontroll Universali) m'għandux latenza dixxernibbli minħabba li l-awdjo live jiġi internament mgħoddi direttament mill-inputs għall-outputs mingħajr DAW I/O buffering.

Monitoraġġ b'Kontroll Universali

• Il-funzjoni primarja tal-Kontroll Universali hija l-monitoraġġ tal-inputs Quantum waqt il-prestazzjoni live. Meta jintuża ma 'DAW, Kontroll Universali jintuża bħala mixer tal-monitor li jiffunzjona separatament mill-mixer ta' monitoraġġ tas-softwer tad-DAW.
• Make sure to disable Software Monitoring in the DAW when using Universal Control. When Universal Control is used for live input monitoring with a DAW, the DAW’s software monitoring feature should be disabled. If it isn’t, phasing and/or doubling of the monitored signal(s) will occur because the input signal is being heard twice – first from the low-latency DSP mix (Universal Control) and shortly thereafter from the higher latency software mix (DAW).

Loopback
Quantum’s device drivers carry virtual (software only) input and output channels in addition to those directly associated with the hardware inputs and outputs. Loopback facilitates highly flexible signal routing via the DAW, without needing to reach behind the gear rack for manual cable patching. Additionally, since the loopback audio streams are in the digital domain, a pristine audio signal path is maintained without requiring additional A/D – D/A conversions. Loopback sends enable any input to be routed directly into Universal Control’s FlexChannel (see section 2.3.2 in this manual for more information).

Irrisettja l-Apparat
Jekk tiltaqa' ma' problema bil-Quantum tiegħek u għandek bżonn tirrisettja l-apparat, tista 'terġa' ssettja għas-settings tal-apparat default jew terġa' lura għal firmware preċedenti.

Settings Default tal-Apparat
Jekk meħtieġ, tista’ tirrestawra l-mixer default (preamp gain, output levels, etc.) and system settings (speaker switching modes, headphone mix sources, etc). To restore the default system settings:

• Fil-Kontroll Universali, innaviga lejn Settings (ikona tal-irkaptu)
• Agħfas il-buttuna "Factory Reset".
• Se tidher kaxxa ta' konferma
• Agħżel "Reset" biex tikkonferma jew "Ikkanċella" biex tikkanċella r-reset

Ireġġa' lura għall-Firmware Preċedenti
Biex terġa 'lura għal firmware preċedenti:

1. Iddiżinstalla l-verżjoni attwali tal-Kontroll Universali
2. Installa l-verżjoni tal-Kontroll Universali li għandha l-firmware preċedenti
3. Bil-Quantum mixgħul, iftaħ Kontroll Universali u kklikkja "Aġġorna Firmware"
4. Notifika se tgħid li l-firmware tiegħek huwa aġġornat u xorta se taġġorna
5. Agħżel "Aġġorna xorta" u segwi l-proċess

Nota:
If your Quantum HD ever becomes unresponsive, press and hold the knob while powering on to enter firmware recovery mode.

Quantum Control from Fender Studio Pro
Your Quantum HD interface can be controlled directly from Fender Studio Pro (only compatible with version 6.6.1 or higher). After configuring the inputs and outputs of your interface within Fender Studio Pro, you’ll have easy control over various channel parameters, including channel Preamp Gain, Phantom Power, High Pass Filter, Auto Gain and Pad (HD only). To set up your Quantum Interface in Fender Studio Pro, follow the directions below. Once all cable connections are made and you have updated the Quantum’s firmware:

1. Launch Fender Studio Pro.
2. Navigate to Studio Pro/Options/Audio Setup/Audio Device (macOS: Preferences/Audio Setup/Audio Device) to open the Audio Device settings window.
3. Agħżel Quantum kemm bħala l-apparat tal-Daqq kif ukoll tar-Reġistrazzjoni.
4. Ikkonfigura kwalunkwe Apparat Awdjo jew settings tal-Ipproċessar kif mixtieq.
5. Ikklikkja OK.

Setup I/O

• Before creating your first song, it’s recommended that you first configure your Quantum Interface for input and output routing in Fender Studio Pro.
• To route Inputs and Outputs, go to Fender Studio Pro Preferences, then select “Audio Setup”. In the bottom left corner, select “Song Setup” to enter the Audio I/O Setup tab.

L-Assenjazzjoni tal-Hardware I/O lil Software I/O Channels

• L-inputs u l-outputs tal-ħardwer huma assenjati għal kanali I/O tas-softwer f'router matriċi, li hija rappreżentazzjoni viżwali tar-rotta. Il-kanali tas-softwer (mono u stereo) kull wieħed jingħata ringiela orizzontali, u l-inputs u l-outputs tal-ħardwer jingħataw kolonni vertikali. Il-punti li fihom dawn ir-ringieli u l-kolonni jaqsmu bejniethom jirrappreżentaw konnessjonijiet potenzjali, jew rotot, bejn il-kanali tal-I/O tal-ħardwer u tal-I/O tas-softwer.
• By default, Fender Studio Pro creates three Input Channels: one stereo and two mono. These channels are labeled Input L+R (stereo), Input L (mono), and Input R (mono). By default, the stereo Input Channel receives input from the first stereo hardware input pair of your selected audio device. The two mono Channels receive input from the same stereo hardware input pair. The Output Channel is labeled Main Out (stereo) and is routed by default to the first stereo hardware output pair of your selected audio device.
• Biex toħloq rotta bejn il-kanali I/O tas-softwer u l-I/O tal-ħardwer, ikklikkja fuq il-kwadru vojt fl-intersezzjoni tal-input jew output tal-hardware mixtieq u l-input jew output tal-kanal tas-softwer. Jidher kwadru kkulurit b'tikketta M, L, jew R, li tindika jekk ir-rotta hijiex rotta mono (M) jew in-naħa tax-xellug jew tal-lemin ta 'rotta stereo (L jew R).
• Nota: Fl-ogħla sample rates, the number of available ADAT Inputs and outputs is reduced for each port. At 88.2/96 kHz, only ADAT channels 1–8 are available, and all digital is disabled at sample rati ogħla minn 96 kHz. Il-kanali ADAT mhux disponibbli huma indikati b'test korsiv fil-paġni Input, Output, Bus, u Daħħal tal-I/O Setup.

Setup ta' Input Quantum
From the Inputs tab, you can enable any or all of the inputs on your Fender Quantum audio interface that you’d like to have available. Use the “Add” button options below the matrix to add new inputs.

Karatteristiċi Quantum Integrati

Setup tal-Output Quantum
Biex teditja r-routing tal-output, ikklikkja fuq it-tab "Outputs" u żid l-outputs billi tuża l-buttuni Żid taħt il-matrix router.

Default Device I/O Setup
We recommend that you create a default Audio I/O Setup that can be a starting point for all new Songs. This lets you immediately begin working on your new Song, with little or no preliminary setup. To do so, create software I/O channels for all of your audio device’s commonly used inputs and outputs and name them appropriately. Then, click on the “Make Default” button in the Audio I/O Setup menu, and a pop-up window appears to confirm that you wish to make the current I/O setup the default for new Songs. Click “Yes”, and from that point forward, all new Songs will be created with this audio I/O setup. You can always use the “Reset to Default” button to apply this configuration to a song.

Karatteristiċi Quantum Integrati
Fender Studio Pro channel strips have integrated Quantum hardware controls built in when Quantum is selected as the Playback and Recording device in Studio One Pro. To access these control features, open the “Mix” console view from the Fender Studio Pro song page.

Karatteristiċi tal-Kontroll tal-Kanal
Il-karatteristiċi tal-kontroll tal-kanal se jkunu inkorporati fil-parti ta 'fuq ta' kull kanal.

• Preamp Gwadan Livell. Uża dan il-kontroll biex issettja l-gwadann (0 dB sa +75 dB) għall-mikrofonu jew l-istrument tiegħek.
• Livell ta' Input tal-Linja. Jekk sinjal tal-livell tal-linja huwa konness permezz tal-port TRS tal-jack combo, imbagħad preamp il-kontroll tal-gwadann jaqleb għal kontroll tal-Livell tal-Linja (-12 dB sa +12 dB).
• Ikseb il-Valur. Juri l-valur assolut għall-Gwadan kurrenti. Ikklikkja darbtejn fuq il-valur biex tidħol valur speċifiku.
• High Pass Filtru. Jingaġġa/diżingaġġa HPF f'80 Hz b'inklinazzjoni ta' 12 dB kull ottava.
• Phantom Power (48V). Engages / disengages 48V phantom power for use with condenser microphones.
• Gwadan Awtomatiku. Issettja awtomatikament il-livell tal-gwadann għall-kanal magħżul.
• Pad: Reduces the overall gain level for the channel by -20 dB (microphone only).

Additional Fender Studio Pro Resources

Kontrolli tal-Output tal-Hardware Quantum
Fender Studio Pro has integrated Quantum hardware output controls built in when Quantum is selected as the Playback and Recording device in Fender Studio Pro.

• Headphone Source Selector. Select the source for the Headphone Output 1 or 2.
• Monitor. Agħżel liema kelliem(i) huma kkontrollati mill-pum.
• Dim. Inaqqas l-Output Prinċipali bl-ammont stabbilit f'Settings (default huwa -10 dB).
• Mute. Ijattiva l-Output Prinċipali. Innota li mute ma jaffettwax il-headphones.
• Speaker Switching toggle. When Speaker Switching is active, it changes to either speaker set A or speaker set B.
• Qlib tal-Ispeaker. Agħżel l-imġieba għall-bidla tal-kelliem meta tagħfas il-buttuna tal-Kontroll tal-Monitorijiet.

Nota:
If you do not see either of these Quantum controls within Fender Studio Pro, make sure that the “Audio device controls” option is checked in the channel options:

Additional Fender Studio Pro Resources

• Operating instructions for Fender Studio Pro is beyond the scope of this Owner’s Manual, but Fender Studio Pro comes bundled with an array of demo and tutorial materials. For more detailed information about all of the available features in Fender Studio Pro, check out the Fender Studio Pro User Manual. You can access this manual at any time while Fender Studio Pro is open by navigating to Help/Fender Studio Pro User Manual or by pressing the F1 key on your keyboard.
• 311 ĊIRKU CESSNA
• CORONA, CALIF. 92878
• USA WWW.FENDER.COM
• ©2026 Fender Musical Instruments Corporation. All Rights Reserved. The Fender logo (plain and stylized) Fender Studio, and Fender Studio Pro are trademarks of FMIC. Mac, macOS, iOS, and iPadOS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH.
  Ismijiet oħra ta' prodotti msemmija hawn jistgħu jkunu trademarks tal-kumpaniji rispettivi tagħhom. L-ispeċifikazzjonijiet kollha soġġetti għal bidla mingħajr avviż.

FAQs