EPH DC7-25 Adjustable Step Down Module
Speċifikazzjonijiet
| Karatteristika | Dettalji |
|---|---|
| Brand | EPH |
| Mudell | DC7-25 |
| Tip | Adjustable Step-Down (Buck) VoltagModulu tar-Regolatur e |
| Input Voltage | DC 7V - 25V |
| Ħruġ Voltage | Adjustable: DC 1.25V – 20V (depending on load and input) |
| Kurrent tal-Ħruġ | Typically up to 3A (check datasheet for exact max) |
| Effiċjenza tal-Konverżjoni | ~85–95% typical |
| Metodu ta' Aġġustament | Precision potentiometer (variable resistor) |
| Voltage Regolament | Stable output with minimal ripple |
| Karatteristiċi ta' Protezzjoni | Short-circuit protection, thermal shutdown (model-dependent) |
| Temperatura operattiva | -40°C to +85°C (typical) |
| Daqs / Dimensjonijiet | Compact PCB module (approx. 43 × 21 × 14 mm, confirm model) |
| Applikazzjonijiet | Arduino projects, electronics prototyping, LED drivers, battery charging, DIY circuits |
| Piż | Lightweight, PCB only (~15–20 g) |
| Sigurtà | Ensure proper heat dissipation when drawing high current |
Gwida Quick Start
- Connect the DC power input to the module using the DC5.5mm*2.1mm interface.
- Agħżel il-volum tal-ħruġ mixtieqtage (3.3V, 5V, or adjustable) using the onboard settings.
- Tiżgura l-input voltage is between DC7V and DC25V.
- Power on the module and check the power indicator light for functionality.
Informazzjoni dwar is-Sigurtà
Twissijiet:
- Consult a doctor before use if you are unsure about handling electrical components.
- Ensure clear space for movement while working with the module to avoid accidents.
- Żomm il-modulu niexef u 'l bogħod mill-umdità.
- Wipe the module with a damp cloth for cleaning and avoid using harsh chemicals.
Kuntatt
- Servizz: Contact our store support for any issues.
Dokumenti / Riżorsi
 | DC7-25 Adjustable Step Down Module |
Referenzi
- Manwal għall-Utentmanual.tools
Ippubblikat: 23 ta' Mejju, 2026