Manwal tal-Istruzzjonijiet ENTTEC 73539 DIN PIXIE

Introduzzjoni:
ENTTEC Pixel controllers support over 20 default pixel protocols. The custom protocol feature allows users to create a custom protocol for pixel fixtures not covered by default protocols without the need for new firmware.

Rekwiżiti ta' Setup:

Datasheet of the desired pixel fixture
Computer to access the device settings page
For ENTTEC Ethernet Controller: Device IP address (DHCP or static)
For DIN PIXIE: EMU Software for configuration

Guide to Custom Protocol Creation:

Verify datasheet for compatible pixel protocol
Navigate to the Device’s User Interface to enablethe custom protocol feature

Adjustthe pixel fixture’s data voltage timing viathe web interface based othe n datasheet

Step 1: Verify Datasheet for Compatible Protocol

Check the data transmission method from the datasheet
Identify data transmission method (e.g., D1-D2-D3…Dn or C1-C2-D1-D2…Dn)
Choose a supported protocol with a similar data transmission method

FIRMWARE KOMPATIBBLI

Il-ħolqien ta' protokoll personalizzat jidher fil-kontrolluri tal-pixel ENTTEC li ġejjin:

SKU	Prodott	Verżjoni tal-Firmware
73539	DIN PIXIE	V2.0 jew aktar
70067	PIXELATOR MINI	V2.0 jew aktar
70068	PIXELATOR MINI MK2	V1.0 jew aktar
71521	OCTO MK2	V4.0 jew aktar
71522	OCTO MK3	V1.0 jew aktar

INTRODUZZJONI

ENTTEC Pixel controllers support more than 20 pixel protocols by default. In the event of missing protocol, this custom feature allows users to create a custom protocol for the desired pixel fixture anytime without having to submit a support request for new firmware.

Din il-karatteristika tippermetti lill-utenti jaġġustaw il-voltage timing ibbażat fuq il-protokolli appoġġjati jekk il-metodu ta 'trażmissjoni tad-dejta jaqbel ma' kwalunkwe protokolli appoġġjati tagħna.
Dan id-dokument jipprovdi struzzjonijiet ta 'setup għall-ħolqien ta' protokoll tal-pixels personalizzat u l-verifika tal-kriterji.

REKWIŻITI TA' SETUP

Dawn li ġejjin huma meħtieġa biex jinħoloq protokoll tad-dwana:

Datasheet: Obtain the datasheet of the desired pixel fixture to gather necessary information. Contact the dealer or manufacturer for this document.
Apparat: Use a computer to access the device settings page.

For the TEC Ethernet Controller: Obtain the device IP address, which can be either DHCP or static, based on your network settings. Discover the IP using the ENTTEC EMU app.
For DIN PIXIE: Use the EMU Software for configuration.

GWIDA GĦALL-ĦOLQIEN TA’ PROTOKOLL DWANA

Din il-karatteristika tippermetti lill-utenti jaġġustaw id-data voltage timing to meet specific protocol needs. To create a custom protocol:

Ivverifika d-datasheet għall-protokoll tal-pixel kompatibbli.
Innaviga lejn l-Interface tal-Utent tal-Apparat biex tippermetti l-karatteristika tal-protokoll tad-dwana.
Aġġusta l-volum tad-dejta tal-apparat tal-pixeltage timing permezz tal- web interface skont id-datasheet tal-manifattur.

Pass 1: Ivverifika d-datasheet għall-protokoll kompatibbli

Ivverifika l-metodu tat-trażmissjoni tad-dejta tal-protokoll mixtieq tiegħek mid-datasheet.
1. The data transmission method implies how the data is forwarded. Below are demonstrated the common data transmission methods:
  - L-aktar metodu komuni jittrasmetti data mingħajr bits addizzjonali (eż., D1-D2-D3...Dn).
    Example: Informazzjoni maqbuda mid-datasheet tal-WB2812B
  - Xi protokolli, bħal TM1814, jinkludu data addizzjonali fuq quddiem (eż., C1-C2-D1-D2...Dn).
    Example: Informazzjoni maqbuda mid-datasheet ta' TM1814

Innomina l-protokoll ta’ tqabbil appoġġjat mill-apparat (jew agħżel minn hawn fuq example) that shares the same data transmission method as your desired pixel protocol.
Ipproċedi għall-Pass 2 għal aktar konfigurazzjoni.

Step 2: Navigate to the Device’s Settings page to enable the custom protocol feature
In this step, the OCTO/PIXELATOR MINI Series and Din PIXIE are guided accordingly due to their distinct interfaces.
For ENTTEC Ethernet Controllers (OCTO/PIXELATOR MINI Series)

Access to the OCTO/PIXELATOR MINI web interface
1. Google Chrome huwa ssuġġerit bħala l- web browser to access the OCTO/PIXELATOR MINI’s web interface.
2. Free ENTTEC app, EMU can be used to discover OCTO/PIXELATOR MINI’s IP address. See the ENTTEC websit www.enttec.com biex tniżżel l-app.
3. After entering the IP address of OCTO/PIXELATOR MINI, the user will land on the Home page of OCTO/PIXELATOR MINI’s User Interface.
  
  Example of the OCTO homepage in Figure 1 indicates IP address 10.10.3.31, which was assigned by the DHCP server. For the out-of-box OCTO/PIXELATOR MINI that is connected directly to a computer (no DHCP server), the default IP address is 192.168.0.10.
  See OCTO/PIXELATOR MINI User Manual ‘Networking’ section for more information.
Navigate to the Settings page – Output Setting.
Mur għall-output fejn l-apparat tal-pixel mixtieq huwa konness miegħu. Agħżel protokoll tal-pixel mil-lista dropdown li jaqsam l-istess metodu ta 'trażmissjoni vverifikat fil-Pass 1.

Enable Custom protocol (Continue to Step 3)
Ippermetti l-kaxxa tal-immarka 'Custom' biex taċċessa d-data voltage setup tal-ħin. Immarka biex tiddiżattiva l-protokoll tad-dwana.

Għal DIN PIXIE

Qabbad DIN PIXIE ma' kompjuter billi tuża USB Type-B.
Tnedija Software EMU.
Skennja għall-apparat u kklikkja fuq il-Conf tad-DIN PIXIE skoperti.

Enable Custom Protocol (Continue to Step 3)
Pick a pixel protocol from the dropdown list that shares the same transmission method verified in tp,1, and enable Custom.

Pass 3: Issettja vol personalizzattage timing

Qabbel il-voltage timing fuq id-datasheet tal-protokoll mixtieq tiegħek. Il-Protokoll tad-dwana jeħtieġ 4 inputs biex tlesti d-dejta voltage aġġustament tal-ħin:

Voltage Timing Definition
Bit 0 Ħin Għoli (T0H)	Il-voltagĦin għoli meħtieġ għall-kodiċi 0.
Bit 1 Ħin Għoli (T1H)	Il-voltagĦin għoli meħtieġ għall-kodiċi 1.
Overall Bit Time:	Il-vol totalitage time for a single bit. Lower limit = T0H+T0L Upper limit = T1H+T1L
Irrisettja l-Ħin	Il-vol totalitagĦin baxx meħtieġ biex terġa 'tiġi reset it-trażmissjoni tad-dejta bejn kull lott tad-dejta.

ENTTEC-73539-DIN-PIXIE-FIG-9

Datasheet – Data voltage timing info Eżample
Mill-folja tad-dejta tal-WB2818B
- Locate the ‘Sequence Time’ table in WB2818B’s datasheet for the voltage medda ta' ħin.
- Imla l-voltage medda ta' ħin fil-qasam tad-dwana f'Settings tal-Output.

IMPORTANTI

ENTTEC recommends taking the median value of the range for the start.
L-utent ikollu SAVE settings biex il-valur modifikat jidħol fis-seħħ.
Fine adjustment of value required, followed by actual output test to optimise custom protocol for pixel fixture control.
ENTTEC recommends a trial run on the actual setup before finalising the custom protocol setup.
Typical issues of incorrect setup include, including and not limited to, failure to light up and output flickering.

KONKLUŻJONI

Din il-gwida wriet kif twaqqaf protokoll tad-dwana għal apparati ENTTEC eliġibbli u pprovdiet għarfien tekniku dwar il-verifika tad-datasheet tal-attrezzaturi tal-pixels mixtieqa tiegħek.
Billi jsegwu dawn il-passi, l-utenti jistgħu joħolqu protokoll tal-pixels personalizzat li ma jinstabx fil-lista drop-down mingħajr ma jistennew appoġġ tekniku jew rilaxx ġdid tal-firmware. Jekk għandek mistoqsijiet jew diffikultà biex issib l-informazzjoni t-tajba, ikkuntattja lit-tim ta’ appoġġ ta’ ħbiberija tagħna fl-uffiċċji lokali.

FAQ

How do I access the device settings page on my computer?

You can access the device settings page by connecting your computer to the device's network and entering the IP address in a web browser.

Can I create a custom protocol without the datasheet?

It is recommended to have the datasheet to ensure accurate customization of the protocol based on the pixel fixture's specifications.

Dokumenti / Riżorsi

ENTTEC 73539 DIN PIXIE [pdfManwal tal-Istruzzjonijiet
DIN PIXIE, PIXELATOR MINI, PIXELATOR MINI MK2, OCTO MK2, OCTO MK3, 73539 DIN PIXIE, 73539, DIN PIXIE, PIXIE

Referenzi

Manwal għall-Utent

ENTTEC 73539 DIN PIXIE

Informazzjoni dwar il-Prodott

Istruzzjonijiet għall-Użu tal-Prodott