electro-harmonix ABRAMS100 100W Stat Solidu Ampaktar ħaj

Prosit

Congratulations on your purchase of the Electro-Harmonix ABRAMS100, 100-Watt amplifier. L-ABRAMS100 hija kitarra u strument mużikali amplifier with three bands of EQ, digital spring reverb, and an effects loop.
It sports a high headroom instrument preamplifier but also allows for connecting an external preamp directly to the Abram’s power amp through the Effects Loop Return input. A built-in universal power supply means the ABRAMS100 is ready to be powered anywhere in the world.

Istruzzjonijiet Importanti dwar is-Sigurtà

• Aqra u żomm dawn l-istruzzjonijiet.
• Oqgħod attent għat-twissijiet kollha.
• Segwi l-istruzzjonijiet kollha.
• Naddaf biss b'ċarruta niexfa.
• Qabbad il- amplifier to a mains socket outlet with a protective earthing connection.
• M'għandekx tegħleb l-iskop tas-sigurtà tal-plagg tat-tip polarizzat jew ta 'l-ert. Jekk il-plagg ipprovdut ma jidħolx fl-iżbokk tiegħek, ikkonsulta elettriċista għas-sostituzzjoni tal-iżbokk skadut.
• Ipproteġi l-korda tad-dawl milli jimxi fuqu jew maqrusa.
• Unplug dan ampaktar ħaj waqt maltempati tas-sajjetti jew meta ma jintużawx għal perjodi twal ta 'żmien.
• Fejn il-plagg tal-mejn jew il-coupler ta' l-appliance jintużaw bħala l-apparat ta' skonnettjar, l-apparat ta' skonnettjar għandu jibqa' operabbli faċilment.
• L-apparat mhuwiex għall-użu fi klimi tropikali.
• Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• L-ebda sors ta' fjamma mikxufa, bħal xemgħat mixgħula, m'għandhom jitqiegħdu fuq l-apparat.
• TWISSIJA: Biex tnaqqas ir-riskju ta 'nar jew xokk elettriku, tesponix dan l-apparat għax-xita jew l-umdità.
• Do not expose this apparatus to dripping or splashing and ensure that no object filled with liquids is placed on the equipment. Do not use this apparatus near water.
• Maintain at least 6 in. of unobstructed air space on either side of the unit to allow for proper ventilation and cooling. Air must be capable of freely moving around the device.
• Il-ventilazzjoni m'għandhiex tkun imfixkla billi tkopri l-fetħiet tal-ventilazzjoni b'oġġetti bħal gazzetti, tvalji, purtieri, eċċ.
• Dan amplifier huwa kapaċi jipproduċi livelli għoljin ħafna ta' pressjoni tal-ħoss li jistgħu jikkawżaw ħsara fis-smigħ temporanja jew permanenti. Oqgħod attent meta taġġusta l-livelli tal-volum waqt l-użu.
• Tħaddimx il- amplifier without a connected loudspeaker load.
• Refer all servicing and maintenance to qualified service personnel. Changes and modifications not expressly approved by EHX can void the warranty.
• Is-servizz huwa meħtieġ meta l-apparat ikun ġie bil-ħsara b'xi mod, bħal korda tal-provvista tal-enerġija jew plagg ikun bil-ħsara, likwidu jkun inxtered jew oġġetti jkunu waqgħu fl-apparat, l-apparat ikun ġie espost għax-xita jew umdità, ma jaħdimx b'mod normali , jew twaqqgħet.
• Tippruvax tiftaħ ix-chassis. M'hemm l-ebda partijiet servibbli mill-utent.

TWISSIJA:
BIEX TNAQQAS IR-RISKJU TA' NAR JEW XOKK ELETTRIKU MA TESPONIX DAN IL-PRODOTT GĦAX-XITA JEW L-UMIDITÀ.

 Il-flash tas-sajjetti bis-simbolu tal-vleġġa fi ħdan trijangolu ekwilaterali, huwa maħsub biex javża lill-utent għall-preżenza ta' "vol perikolużi" mhux iżolati.tage” fl-għeluq tal-prodott li jista' jkun ta' kobor suffiċjenti biex jikkostitwixxi riskju ta' xokk elettriku għall-persuni.
 Il-punt ta' esklamazzjoni fi ħdan trijangolu ekwilaterali huwa maħsub biex javża lill-utent dwar il-preżenza ta' istruzzjonijiet importanti ta' tħaddim u manutenzjoni (servizz) fil-letteratura li takkumpanja l-prodott.

Kontrolli u Konnessjonijiet

KONTROLLI TAL-PANNELL TA 'QUDDIEM: 

1. INPUT Jack This ½” jack is the main audio input for the amplifier and is directly connected to the preamp. The input impedance is 100ΜΩ.
2. Dawl Indikatur – lights up red when ABRAMS100 is properly powered. The light turns on a few seconds after engaging power. Once lit, another few seconds are needed before the amplifier’s speaker output is enabled.
3. Buttuna GAIN Controls the input gain of the amplifier. Turning this control clockwise will increase the volume and gain of the preamp circuit making the sound louder. The GAIN knob has a very wide range in order to accommodate many different types of guitar pickups, pedals, and other devices. The input gain stage has high headroom but can still clip at higher settings of the GAIN knob or if the input signal is very hot.
4. Buttun BASS Jikkontrolla l- amplifier’s frequency response. Turning this control clockwise increases bass.
5. Buttuna MID Jikkontrolla l- amplifier’s frequency response. Turning this control clockwise increases the middle frequency.
6. Buttun TREBLE Jikkontrolla l- amplifier’s frequency response. Turning this control clockwise increases the treble frequency.
7. Pum REVERB Adjusts the level of the reverb effect. Turning the knob clockwise will increase the amount of reverb.
8. BRIGHT Switch Pushing the BRIGHT switch in will increase the treble frequency and presence. Useful while using dark speaker cabinets or while playing at lower volume levels.
9. Buttuna tal-VOLUM Controls the overall loudness of the amplifier. It is recommended to turn down the VOLUME prior to applying or removing power.
   

Appoġġ għall-Klijent

WWW.EHX.COM

Dokumenti / Riżorsi

electro-harmonix ABRAMS100 100W Stat Solidu Ampaktar ħaj [pdfManwal tal-Istruzzjonijiet ABRAMS100 100W Solid State Amplifier, ABRAMS100, 100W Solid State Amplifier, Stat solidu Amplifier, State Amplifier, Ampaktar ħaj

Referenzi

• Manwal għall-Utent