DELL Command Configure Software User Manual

Noti, kawzjonijiet, u twissijiet

NOTA: NOTA tindika informazzjoni importanti li tgħinek tagħmel użu aħjar mill-prodott tiegħek.

ATTENZJONI: ATTENZJONI tindika jew ħsara potenzjali lill-hardware jew telf ta 'dejta u tgħidlek kif tevita l-problema.

TWISSIJA: TWISSIJA tindika potenzjal għal ħsara lill-proprjetà, korriment personali, jew mewt.

© 2025 Dell Inc. jew is-sussidjarji tagħha. Id-drittijiet kollha riżervati. Dell Technologies, Dell, u trademarks oħra huma trademarks ta’ Dell Inc. jew is-sussidjarji tagħha. Trademarks oħra jistgħu jkunu trademarks tas-sidien rispettivi tagħhom.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

NOTA: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Kmand Dell | Konfigurat 4.10.1 jew aktar tard jiġġenera SCE 64-bit b'restrizzjonijiet.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Suġġetti:

• Verżjoni
• Udjenza maħsuba
• Għan tad-dokument

Verżjoni

Dan il-kapitolu jipprovdi overview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Ambjent ta' Preinstallazzjoni tal-Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Tabella 1. Matriċi tal-verżjoni

NOTA: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Udjenza maħsuba

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Għan tad-dokument

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Aċċess għal Dell Command | Ikkonfigura l-installatur

Il-Kmand Dell | Ikkonfigura l-installazzjoni file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Mur għall-Appoġġ | Dell.
2. Taħt Liema prodott nistgħu ngħinuk, daħħal il- Servizz Tag tat-tagħmir Dell appoġġjat tiegħek u kklikkja Issottometti, jew ikklikkja Issib kompjuter personali.
3. Fuq il-paġna tal-Appoġġ tal-Prodott għat-tagħmir Dell tiegħek, ikklikkja Sewwieqa u Downloads.
4. Ikklikkja Sib manwalment sewwieq speċifiku għalik [mudell].
5. Iċċekkja Ġestjoni tas-Sistema checkbox taħt Kategorija drop-down.
6. Sib Kmand Dell | Ikkonfigura in list and select Niżżel fuq in-naħa tal-lemin tal-paġna.
7. Sib l-imniżżel file fuq il-kompjuter tiegħek (f'Google Chrome, il- file jidher fil-qiegħ tat-tieqa tal-Chrome), u mexxi l-eżekutibbli file.
8. Segwi l-istruzzjonijiet fuq l-iskrin.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Suġġetti:

• Sistemi operattivi appoġġjati għall-Windows
  
• Pjattaformi appoġġjati
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Sistemi operattivi appoġġjati għall-Windows

Tabella 2. Sistemi operattivi appoġġjati

Pjattaformi appoġġjati

Table 3. Supported platforms

Table 3. Supported platforms (continued)

NOTA: Platforms must support WMI-ACPI BIOS for full functionality.

NOTA: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

NOTA: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

NOTA: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Prerekwiżiti

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

NOTA:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Ixgħel jew itfi l-karatteristiċi tal-Windows skrin.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Ikklikkja darbtejn id-DUP imniżżel, ikklikkja Iva, u mbagħad ikklikkja INSTALLA.
   Il-Kmand Dell | Jidher l-Wizard tal-installazzjoni tal-Konfigurazzjoni.
2. Mexxi l-Wizard tal-installazzjoni.
   Għal aktar informazzjoni, ara Tmexxi l-wizard tal-installazzjoni.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Mexxi l-kmand li ġej:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Ikklikkja darbtejn il-Dell Update Package (DUP) imniżżel, u kklikkja Iva.
2. Ikklikkja ESTRATT.
   It-tieqa Ibbrawżja Għall Folder hija murija.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Biex view l-estratt files, ikklikkja View Folder.
   Il-folder fih dan li ġej files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Biex taċċessa l-Kmand Dell | Ikkonfigura l-Wizard tal-installazzjoni, ikklikkja darbtejn Command_Configure.msi.
6. Mexxi l-Wizard tal-installazzjoni.
   Għal aktar informazzjoni, ara Tmexxi l-wizard tal-installazzjoni.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Tmexxi l-wizard tal-installazzjoni

To run the installation wizard for installing the Dell Command | Configure .msi file fuq l-apparat tiegħek:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Jintwera l-wizard tal-installazzjoni.
3.  Ikklikkja Li jmiss.
   Tintwera l-iskrin tal-Ftehim tal-Liċenzja.
4. Aqra l-ftehim tal-liċenzja u kklikkja Naċċetta t-termini fil-ftehim tal-liċenzja, u mbagħad ikklikkja Li jmiss.
   L-iskrin ta' Informazzjoni tal-Klijent jintwera.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   L-iskrin tas-setup tad-dwana jintwera.
6. Ikklikkja Li jmiss biex tinstalla Dell Command | Ikkonfigura CLI u GUI fid-direttorju default. Il-Kmand Dell default | Il-konfigurazzjoni tad-direttorji tal-installazzjoni huma:
   ● For 32-bit systems, C:\Program Files\Dell\Kmand Konfigurazzjoni.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Kmand Konfigurazzjoni.
   L-iskrin Lest biex Tinstalla l-Programm jintwera.
7. Ikklikkja Iva.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Ikklikkja Finish.
   Jekk il-Kmand Dell | Konfigurazzjoni GUI hija installata b'suċċess, is-shortcut għall-GUI hija murija fuq id-desktop.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

NOTA: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

NOTA: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Mur fil-folder fejn id-Dell Command | L-installatur tal-konfigurazzjoni jiġi estratt mid-Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. Mexxi l-kmand li ġej: msiexec.exe /i Command_Configure.msi /qn
   Il-Kmand Dell | Il-komponenti tal-konfigurazzjoni huma installati fis-skiet fil-postijiet li ġejjin:
   ● For 32-bit systems, C:\Program Files\Dell\Kmand Konfigurazzjoni.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Kmand Konfigurazzjoni.

Installazzjoni b'lingwi appoġġjati

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Tajwan Ċiniż
• 1031 — Ġermaniż
• 1033 - Ingliż
• 1034 — Spanjol
• 1036 — Franċiż
• 1040 — Taljan
• 1041 - Ġappuniż
• 1043 — Olandiż
• 2052 — Ċiniż simplifikat
• 3076 — Hongkong Ċiniż

NOTA: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Iftaħ il- Panel tal-Kontroll.
2. Mur fuq Programmi > Programmi u Karatteristiċi.
3. Find Dell Command | Configure fil-lista.
4. Right-click it and select Iddiżinstalla.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

NOTA: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

NOTA: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

NOTA: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

NOTA: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Wettaq il-passi li ġejjin biex taġġorna Dell Command | Ikkonfigura (li qabel kienet Dell Client Configuration Toolkit) għall-verżjoni li jmiss:

1. Double-click the downloaded DUP, and then click INSTALLA.
   Il-Kmand Dell | Jiġi mniedi l-Wizard tal-installazzjoni tal-Konfigurazzjoni.
2. Mexxi l-Wizard tal-installazzjoni, u segwi l-istruzzjonijiet li jidhru fuq l-iskrin.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Niżżel l-aħħar installazzjoni file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, u mbagħad ħaddem il-kmand li ġej:
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   NOTA: L-iskrin tal-wizard tal-installazzjoni jintwera segwit minn “Verżjoni eqdem ta’ Dell Command | Konfigurazzjoni hija skoperta fuq din is-sistema. Jekk tkompli, l-installatur ineħħi l-verżjoni l-antika u jipproċedi biex jinstalla l-aħħar verżjoni. Jekk tikkanċella l-installazzjoni tal-aħħar verżjoni, is-sistema ma tiġix restawrata għall-verżjoni preċedenti ta' Dell Command | Ikkonfigura. Trid tkompli?” messaġġ.
3. Segwi l-istruzzjonijiet fuq l-iskrin biex taġġorna.
   NOTA: Għal aġġornament sieket, ħaddem il-kmand li ġej: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Aġġornament fil-folder default

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Fittex għall-folder li fih estrajt id-Dell Command | Ikkonfigura l-installatur mid-Dell Update Package (DUP).
2. Mexxi l-kmand li ġej: msiexec.exe /i Command_Configure.msi /qn
   Il-Kmand Dell | Il-komponenti tal-konfigurazzjoni huma installati fis-skiet fil-postijiet li ġejjin:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Kmand Konfigurazzjoni.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Kmand Konfigurazzjoni.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Suġġetti:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Tabella 4. Sistemi operattivi appoġġjati

Supported Platforms for Linux

Table 5. Supported platforms

NOTA: Platforms must support WMI-ACPI BIOS for full functionality.

NOTA: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

NOTA:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. NOTA:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Il-mogħdija tal-installazzjoni awtomatika hija /opt/dell/dcc.

Prerekwiżiti

• L-istazzjon tax-xogħol għandu jkun qed jaħdem fuq sistema operattiva Linux appoġġjata.
• Niżżel il-libreriji openSSL 1.x biex tinstalla u tħaddem Dell Command | Ikkonfigura fuq Red Hat Enterprise Linux 8 u Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Minn dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar il file billi tuża l-kmand li ġej:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar il file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Verżjoni>_ .tar.gz fih il-pakketti li ġejjin li jridu jiġu installati fl-ordni li ġejja:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   NOTA: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f install
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Il-mogħdija tal-installazzjoni awtomatika hija /opt/dell/dcc.
   NOTA: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f install

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

NOTA: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Biex tneħħi Dell Command | Ikkonfigura fuq sistemi li jħaddmu Red Hat Enterprise Linux 8 jew 9, mexxi l-kmandi fl-ordni li ġejja:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

NOTA: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Biex tneħħi Dell Command | Ikkonfigura u neħħi l-konfigurazzjoni files u temporanju files, run the following command: dpkg –purge command-configure
2. Biex tneħħi Hapi u tneħħi l-konfigurazzjoni files u temporanju files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Aġġorna l-verżjoni ta' Dell Command | Ikkonfigura fuq is-sistema.

NOTA: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files u folders fuq is-sistema. Il- files u folders ma jkollhom ebda impatt funzjonali.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar il file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar il file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Biex taġġorna, ħaddem il-kmand li ġej:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Biex tivverifika l-Kmand Dell attwali | Ikkonfigura l-verżjoni, mur fil-mogħdija tal-installazzjoni default u mexxi:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Dan il-kapitolu jipprovdi overview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Suġġetti:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

NOTA: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Prerekwiżiti

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server payloads.

Kun żgur li r-rekwiżiti li ġejjin jiġu ssodisfati:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Jintwera l-wizard tal-installazzjoni.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Ikklikkja Li jmiss.
4. Ikklikkja Installa biex tibda l-installazzjoni.
   The installation completion wizard is displayed.
5. Ikklikkja Finish biex tlesti l-installazzjoni.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   NOTA: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file fil- URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   NOTA: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file b'dan li ġej:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   "Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   NOTA: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   NOTA: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

NOTA: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Il-ħolqien ta' ambjent ta' qabel l-installazzjoni ta' immaġini li tista' tinbeda bl-użu ta' Windows PE 10.0 u 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Mill-Microsoft websit, niżżel u installa Windows ADK fuq is-sistema tal-klijent.
   NOTA: Waqt l-installazzjoni agħżel biss Għodod ta' Skjerament and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Installa Dell Command | Ikkonfigura.
4. Integra l-Kmand Dell | Ikkonfigura l-istruttura tad-direttorju f'ISO file biex toħloq immaġni ISO bootable.

L-integrazzjoni tal-Kmand Dell | Ikkonfigura l-istruttura tad-direttorju f'ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Installa s-sistema operattiva Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Kmand Configure\X86_64.
2. Iftaħ il-pront tal-kmand bi privileġġi tal-amministratur.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   NOTA: Kun żgur li l-mogħdija li tintuża fil-kmand hija dik tal-Kmand Dell | Ikkonfigura folder.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Riżorsi u appoġġ

Tista' taċċessa d-dokumenti meħtieġa billi tagħżel il-prodott tiegħek.

1. Mur fuq Appoġġ | Dell.
2. Ikklikkja Fittex il-prodotti kollha.
3. Ikklikkja Software & Solutions.
4. Ikklikkja Ġestjoni tas-Sistemi tal-Klijent.
5. Ikklikkja Dell Command | Configure.
6. Ikklikkja Select This Product.
7. Biex view id-dokumenti meħtieġa, ikklikkja l-isem tal-prodott meħtieġ u n-numru tal-verżjoni.

NOTA: Jekk m'għandekx konnessjoni attiva tal-Internet, tista' ssib informazzjoni ta' kuntatt dwar il-fattura tax-xiri tiegħek, il-pakkett tal-pakkett, il-kont jew il-katalgu tal-prodotti Dell.

Dell jipprovdi diversi għażliet ta' appoġġ u servizz onlajn u bbażati fuq it-telefon. Id-disponibbiltà tvarja skont il-pajjiż jew ir-reġjun u l-prodott, u xi servizzi jistgħu ma jkunux disponibbli fiż-żona tiegħek. Biex tikkuntattja lil Dell għal kwistjonijiet ta’ bejgħ, appoġġ tekniku jew servizz tal-konsumatur:

1. Mur għall-Appoġġ | Dell.
2. Agħżel il-kategorija ta 'appoġġ tiegħek.
3. Ivverifika l-pajjiż jew ir-reġjun tiegħek fil- Agħżel Pajjiż/Reġjun lista drop-down fil-qiegħ tal-paġna.
4. Agħżel is-servizz xieraq jew il-link ta' appoġġ ibbażat fuq il-ħtieġa tiegħek.

Dokumenti / Riżorsi

DELL Command Configure Software [pdfManwal tal-Utent Command Configure Software, Configure Software, Software

Referenzi

• Manwal għall-Utent