
Coolo Zigbee Smart Light Sensor

Konfigurazzjoni tan-Netwerk
- Qawwa fuq il-prodott
- Align the opener to the slot

- Dawwar l-għatu tal-batterija kontra l-arloġġ biex tiftaħ
- Remove the battery insulation film to power

- Align the opener to the slot
- Agħfas il-buttuna RESET għal 3 sekondi u itlaqha, l-LED aħmar se jteptep għall-konfigurazzjoni tan-netwerk.

Istruzzjonijiet għall-installazzjoni
Pożizzjoni ta 'installazzjoni
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.
Jekk jogħġbok aqra l-manwal bir-reqqa u uża l-prodott b'mod korrett
Grazzi tax-xiriasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.
Deskrizzjoni tal-prodott

Tips:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP
Parametri tal-Prodott
- Product Name Zigbee Ambient Light Sensor
- Protokoll bla fili Zigbee 3.0
- Detection Range 0~157K Lux
- Battery TypeCR2450
- Standby Current<10uA
- Working Temperature -10 ~ 55 C
- Working Humidity 0% ~ 95%RH
- Product Size Ф 33×16mm
Dokumenti / Riżorsi
![]() | Zigbee Smart Light Sensor |
Referenzi
- Manwal għall-Utentmanual.tools
