JABLOTRON huwa manifattur ewlieni tat-teknoloġija li jispeċjalizza f'sistemi ta' sigurtà avvanzati, allarmi, u soluzzjonijiet ta' awtomazzjoni tad-djar intelliġenti għal proprjetajiet residenzjali u kummerċjali.
JABLOTRON is a global technology company headquartered in the Czech Republic, renowned for developing and manufacturing electronic security systems and smart automation products since 1990. The company focuses on protecting property, health, and safety through user-friendly solutions that integrate seamlessly into daily life. Their product portfolio serves both professional installers and end-users, ensuring reliable protection for homes, businesses, and industrial spaces.
The brand's flagship offerings include the JABLOTRON 100+ security system, a wide array of wireless and bus-connected detectors (motion, glass break, smoke, and magnetic), control panels, and access modules. In addition to intrusion alarms, JABLOTRON provides devices for environmental monitoring, heating control, and vehicle tracking. With a commitment to innovation, their systems often feature secure cloud connectivity via the MyJABLOTRON app, allowing users to manage and monitor their installations remotely.
L-aħħar manwali minn manuals+ ikkurata għal din il-marka.
Ara vidjows tas-setup, l-installazzjoni, u s-soluzzjoni tal-problemi għal din il-marka.
Mistoqsijiet komuni dwar manwali, reġistrazzjoni, u appoġġ għal din il-marka.
Before replacing batteries, you must switch the control panel to Service Mode to prevent triggering a tamper alarm. Once in Service Mode, open the detector cover, verify the correct battery polarity (typically AA, AAA, or CR2032 depending on the model), and replace all batteries simultaneously. Always use high-quality alkaline or lithium batteries as specified in the manual.
Devices can be enrolled using the F-Link software. Select a free position in the 'Devices' tab and click 'Enroll'. You can then activate the device by inserting its battery or pressing its tamper contact. Alternatively, you can manually enter the device's serial number (found on the internal label) into the software.
A flashing yellow LED typically indicates that the device has not yet been enrolled in the system or there is a fault. If the yellow LED is permanently lit on certain modules, it may indicate a loss of communication or a specific fault condition like low battery or masking. Refer to the F-Link 'Diagnostics' tab for precise details.
Wireless JABLOTRON detectors operate in a battery-saving mode. In normal operation, they communicate with the control panel periodically (e.g., every 20 minutes). To force immediate communication and apply new settings, you can trigger the detector (e.g., by opening the cover or activating the sensor), which switches it to an accelerated communication mode for a short period.