Baseus Bluetooth Earphone Instructions

Baseus Bluetooth Earphone Overview

This manual explains setup, touch controls, charging, app features, and troubleshooting for Baseus in-ear TWS earbuds (Bowie, Encok, Eli Sport series). Read it fully before use and keep it for future reference.

Speċifikazzjonijiet

Verżjoni Bluetooth Bluetooth 5.3/5.4
Firxa tat-Trażmissjoni Sa 10-il metru (mingħajr ostakli)
Port tal-Iċċarġjar Ċarġ Mgħaġġel tat-Tip C
Klassifikazzjoni li ma jgħaddix ilma minnha IPX4 / IPX5 (sweat & light splash resistant; do not swim or shower)
Ħin tal-Logħob ta' Earbud Uniku 4–6-il siegħa
Ħin Totali tal-Logħob bil-Kaxxa 20–30-il siegħa
Ħlas Mgħaġġel 10 minutes charging for 2 hours playback
Unità tas-sewwieq 10mm composite diaphragm
Kanċellazzjoni tal-Istorbju tas-Sejħiet Dual-mic ENC call noise cancellation

Quick Setup & Use

  1. Open the charging case lid. The earbuds power on automatically and the LED lights flash alternately to enter pairing mode.
  2. On your phone/laptop, turn on Bluetooth and search for the device (e.g., “Baseus Bowie XXX”). Tap it to pair; a voice prompt “Connected” indicates success.
  3. To auto reconnect later: put the earbuds into the case and close the lid to power off; reopen the lid to auto-connect the last paired device.
  4. Touch controls: play/pause (double tap), previous track (left long press 1.5s), next track (right long press 1.5s), volume down (left single tap), volume up (right single tap), voice assistant (triple tap), answer call (double tap), hang up (double tap during call), reject call (long press 1.5s).
  5. Charging: place earbuds into the case and close the lid to auto charge (charging inner light turns on). For the case, plug the Type-C cable into a 5V power adapter (flashing light = charging; steady light = fully charged).

Baseus Bluetooth Earphone Manual

Please read this manual fully before use and keep it for future reference. This guide fits all Baseus in-ear TWS earbuds (Bowie, Encok, Eli Sport series).

1. Kontenut tal-Pakkett

  • 1 Pair of Baseus TWS Earbuds (Left & Right)
  • 1 Charging Storage Case
  • 1 Type-C Fast Charging Cable
  • 3 S/M/L Replacement Silicone Ear Tips
  • 1 Manwal għall-Utent

2. Power On & Bluetooth Pairing

Qawwa Mixgħul

Open charging case lid, earbuds power on automatically, LED lights flash alternately to enter pairing mode.

L-Ewwel Konnessjoni

  1. Turn on Bluetooth on your phone/laptop;
  2. Search Bluetooth device: Baseus Bowie XXX;
  3. Tap the device name to pair, voice prompt “Connected” when matched.

Ikkonnettja mill-ġdid awtomatikament

Put earbuds into case and close lid to power off; open lid to auto connect last paired device.

Konnessjoni ta' Apparat Doppju

  1. Pair earbuds with Device A, put earbuds into case without power off, turn off Bluetooth of A;
  2. Open lid to pair Device B;
  3. Reactivate Bluetooth of A to connect two devices simultaneously, auto switch for incoming calls.

3. Touch Control Operation

Kontroll tal-Mużika

  • Play/Pawsa: Double tap touch area of any earbud
  • Track preċedenti: Long press left earbud for 1.5s
  • Track li jmiss: Long press right earbud for 1.5s
  • Volum 'l isfel: Tap tal-widna tax-xellug bi vit wieħed
  • Volum 'il fuq: Widna tal-widna tal-lemin bi vit wieħed
  • Assistent tal-Vuċi (Siri/Google): Triple tap any earbud

Sejħa Kontroll

  • Irrispondi Sejħa: Double tap earbud
  • Sejjaħ Hang Up: Double tap during call
  • Irrifjuta Sejħa: Long press earbud for 1.5s

ANC / Transparency Mode (Noise Cancelling Models)

Long press earbud for 1 second to cycle: Modalità ANCModalità TrasparenzaModalità Standard

Logħba Modalità Latenza Baxxa

  1. Double tap charging case button to toggle;
  2. Enable in official Baseus App.

4. Charging & Indicator Lights

Iċċarġja Earbuds

Place earbuds into charging slots, close lid to auto charge, inner light turns on while charging.

Każ ta 'Iċċarġjar ta' Ħlas

Plug Type-C cable into 5V power adapter; flashing light = charging, steady light = fully charged.

Light Status Definition

  1. Mod ta 'tqabbil: One white light fast flash, one white light slow flash
  2. Enerġija Baxxa: Red light intermittent flash with voice reminder
  3. Irrisettjar tal-Fabbrika: Both earbuds flash white 3 times then turn off
  4. Full Case Charge: Steady light without flash

Factory Reset (Fix single-side mute, disconnection failure)

Model with Case Button

  1. Put both earbuds fully into case, keep lid open;
  2. Long press case button for 8–10s until both earbuds flash white 3 times;
  3. Release button, close lid for 5s, open lid to re-pair Bluetooth.

Touch-only Model (No Case Button)

  1. Forget earbuds device on your Bluetooth list;
  2. Triple tap earbud touch panel, hear three beep alerts;
  3. Put earbuds back into case, reset complete.

5. Baseus Official App Functions

  1. Download “Baseus” App in app store, auto bind after Bluetooth connection;
  2. Custom touch gestures, EQ sound, spatial audio, game low latency mode;
  3. Check real-time battery of earbuds & charging case;
  4. Enable ENC call noise reduction, voice boost, find earbuds location;
  5. OTA online firmware upgrade to optimize sound and connection stability.

6. Speċifikazzjonijiet Ġenerali

  • Verżjoni Bluetooth: Bluetooth 5.3/5.4, 10 meters barrier-free transmission
  • Port tal-Iċċarġjar: Ċarġ Mgħaġġel tat-Tip C
  • Klassifikazzjoni li ma jgħaddix ilma minnha: IPX4 / IPX5 (Sweat & light splash resistant, DO NOT swim or shower with earbuds)
  • Ħin tal-Logħob b'Earbud Uniku: 4–6H
  • Ħin Totali tal-Logħob bil-Kaxxa: 20–30H
  • Ħlas veloċi: 10 mins charging for 2 hours playback
  • Unità tas-sewwieq: 10mm composite diaphragm, dual-mic ENC call noise cancellation

7. Soluzzjoni ta' Problemi Komuni

  1. Only one earbud has sound: Complete factory reset, clean metal charging contacts, delete Bluetooth record and re-pair;
  2. Frequent Bluetooth disconnection: Stay away from 2.4G WiFi interference, update firmware via App;
  3. Muffled & quiet call voice: Clean microphone hole, enable ENC mode inside App;
  4. Ma tistax tiċċarġja: Wipe dirty metal contacts, replace charging cable or power adapter;
  5. Unresponsive touch panel: Dry water on earbuds surface, reset touch settings in App.

8. Twissijiet tas-Sigurtà

  1. Do not listen to music at high volume for long periods to avoid permanent hearing damage;
  2. Only daily sweatproof, not suitable for shower, diving or swimming;
  3. Charge once per month if unused long-term to extend lithium battery service life;
  4. Keep away from high temperature, heavy squeeze and dropping;
  5. Keep away from children to prevent accidental swallowing of small silicone ear tips.

Issolvi l-problemi

  • Only one earbud has sound: Complete factory reset; clean the metal charging contacts; delete the Bluetooth record and re-pair.
  • Frequent Bluetooth disconnection: Stay away from 2.4G WiFi interference; update firmware via the Baseus App.
  • Muffled & quiet call voice: Clean the microphone hole; enable ENC mode inside the Baseus App.
  • Ma tistax tiċċarġja: Wipe dirty metal contacts; replace the charging cable or power adapter.
  • Unresponsive touch panel: Dry water on the earbuds surface; reset touch settings in the Baseus App.
  • Factory reset (general): Both earbuds flash white 3 times, then turn off. Model-specific reset steps are described in the manual under “Factory Reset (Fix single-side mute, disconnection failure)” for models with a case button and touch-only models.

FAQ

Kif ngħaqqad il-earbuds għall-ewwel darba?
Open the charging case lid to power on and enter pairing mode (LED lights flash alternately). Turn on Bluetooth on your phone/laptop, search for the device (e.g., “Baseus Bowie XXX”), and tap to pair. A voice prompt “Connected” confirms pairing.
How does auto reconnect work?
Put the earbuds into the case and close the lid to power off. Open the lid again to auto-connect to the last paired device.
How do I answer or hang up a call using touch controls?
Answer call: double tap an earbud. Hang up call: double tap during the call. Reject call: long press an earbud for 1.5s.
What should I do if only one earbud has sound?
Complete a factory reset, clean the metal charging contacts, then delete the Bluetooth record and re-pair the earbuds.
Għaliex il-Bluetooth jibqa' jiskonnettja?
The manual advises staying away from 2.4G WiFi interference and updating firmware via the Baseus App.
My earbuds won’t charge—what can I check?
Wipe dirty metal contacts, and replace the charging cable or the power adapter if needed.

Dokumenti / Riżorsi

PDF thumbnailEarphone Bluetooth
Instructions · TWS earbuds, Bowie, Encok, Bluetooth Earphone, Earphone

Referenzi

Staqsi Mistoqsija

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Staqsi Mistoqsija

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.