AtomStack F03-0329-0AA1 Swift

Speċifikazzjonijiet

• Isem tal-Prodott: AtomStack Swift
• Numru tal-Mudell: F03-0329-0AA1
• Verżjoni: B
• Input ta' Enerġija: DC 24V
• Portijiet: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Indikatur tal-Istat: Solid blue when working

Istruzzjonijiet għall-Użu tal-Prodott

Lista tal-Partijiet:

• Assemblaġġ tal-assi X
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• Adapter tal-enerġija
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Lista tal-Partijiet

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Nota: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Nota:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Metodu ta' Fokus:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Tip:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Computer Software Download Method:
AtomStack Studio download link: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Skennja biex tniżżel

Riżorsi tas-Software

LightBurn
Unofficial software. Requires a separate purchase

Lightburn Software Download Method: Download link: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Open the LightBurn software, select: Devices – Import
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Nota: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Gwida għall-Utent

Ikkuntattjana

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Issolvi l-problemi
• Manutenzjoni

Servizz tal-klijent:

• For the detailed warranty policy, please visit our official websit: www.atomstack.com
• Għal appoġġ tekniku u servizz, jekk jogħġbok ibgħat email: support@atomstack.com

Manifattur:
Shenzhen AtomStack Technologies Co., Ltd.

Kodiċi zip: 518172

Indirizz:
17th Floor, Bini 3A, Fażi II, Park Intelliġenti, Nru 76, Baohe Avenue, Baolong Street, Longgang District, Shenzhen, Guangdong, Ċina.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

FAQ

X'għandi nagħmel jekk niltaqa' ma' problemi waqt l-installazzjoni?

If you face any difficulties during installation, refer to the video tutorial available on the official websit jew ikkuntattja l-appoġġ tal-klijent għall-għajnuna.

Dokumenti / Riżorsi

ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdfManwal tal-Utent F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift

Referenzi

• Manwal għall-Utent