Introduzzjoni
Thank you for choosing the Lifepro HydroLife Peak Hydrogen Water Bottle Generator. This portable device utilizes advanced SPE/PEM technology to enrich your drinking water with up to 8000ppb of hydrogen, supporting your daily hydration and active lifestyle. This manual provides essential information for the safe and effective use of your new hydrogen water bottle.

Image: Lifepro HydroLife Peak Hydrogen Water Bottle, front view.
Prodott Overview
The HydroLife Peak is engineered for performance and convenience, featuring a robust design and user-friendly interface.
- High Hydrogen Concentration: Utilizes platinum-coated titanium plates and a proton exchange membrane (SPE/PEM) to produce water with up to 8000ppb hydrogen.
- Display OLED: Provides real-time information on hydrogen levels and cycle duration.
- Portable & Rechargeable: Equipped with a 2000mAh battery and USB-C charging for use anywhere.
- Kostruzzjoni Durabbli: Made from aviation aluminum and food-grade polycarbonate for lightweight, leak-resistant daily use.
- Operazzjoni faċli: Single-button control for 5-minute or 10-minute hydrogen generation cycles.

Immaġni: Splodiet view of the HydroLife Peak components.
Setup
- Spezzjoni Inizjali: Upon receiving your HydroLife Peak, you may notice some water inside. This is normal as the generator is shipped pre-hydrated to protect its components and ensure optimal performance.
- Iċċarġjar: Before first use, fully charge the device using the provided USB-C charging cable. The OLED display will indicate charging status.
- Assemblea: Ensure the bottle is securely screwed onto the base. The leak-resistant design requires a firm connection.

Image: Product arriving pre-hydrated for convenience.
Istruzzjonijiet Operattivi
Follow these steps to generate hydrogen-rich water:
- Imla l-Flixkun: Unscrew the top lid and fill the bottle with potable water, leaving about an inch of space from the top. The HydroLife Peak is compatible with filtered and bottled water.
- Agħżel iċ-Ċiklu: Press the power button on the base to initiate a hydrogen generation cycle. A single press typically starts a 5-minute cycle, while a double press may activate a 10-minute cycle (refer to specific model instructions for exact button functions). The OLED display will show the remaining time and hydrogen concentration (PPM).
- Igawdu: Once the cycle is complete, the device will automatically shut off. Drink the hydrogen-rich water promptly for best results.

Image: Pressing the power button to start hydrogen generation.
Vidjo Uffiċjali tal-Prodott
Video: Demonstrating the features and benefits of the Lifepro HydroLife Peak Hydrogen Water Bottle, including its ease of use and portability.
Manutenzjoni
Proper care ensures the longevity and performance of your HydroLife Peak.
- Tlaħliħ ta' Kuljum: After each use, rinse the bottle and lid with clean water. The wide mouth design facilitates easy cleaning.
- Nadif fil-fond ta' kull xahar: For a thorough cleaning, disassemble the bottle and wash all parts (except the electronic base) with mild soap and water. Ensure all components are completely dry before reassembly.
- Electrolyzer Care: The electrolyzer should not be left dry for extended periods. If not used for a long time, ensure it is kept moist.

Image: Cleaning the HydroLife Peak Hydrogen Water Bottle.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jixgħelx. | Batterija baxxa. | Iċċarġja l-apparat billi tuża l-kejbil USB-C. |
| No hydrogen bubbles generated. | Insufficient water or improper assembly. | Ensure water level is adequate and the bottle is securely attached to the base. |
| Tnixxija tal-ilma. | Lid or bottle not properly sealed. | Tighten the lid and ensure the bottle is correctly screwed onto the base. Check gaskets for damage. |
| Il-wiri OLED mhux qed jaħdem. | Device off or battery low. | Press the power button to activate. Charge the device if the battery is low. |
Speċifikazzjonijiet
- Ditta: LifePro
- Isem tal-Mudell: Hydrolife Peak
- Numru tal-Mudell tal-Oġġett: LP-HYDLFPK-OCN
- Kapaċità: 280 Milliliters (9.5oz)
- Dimensjonijiet tal-Prodott: 2.4"T x 2.4"W x 8.2"Għ
- Piż tal-oġġett: 12.3 uqija (0.77 Libbra)
- Materjal: Polycarbonate, Aviation Aluminum
- Sors tal-Enerġija: Imħaddem bil-batterija (2000mAh)
- Metodu ta' Purifikazzjoni: Hydrogen Electrolysis (SPE/PEM Technology)
- Livell Massimu tat-TDS tal-Ilma Appoġġjat: 600 PPM
- Karatteristika Speċjali: Portabbli
- Komponenti Inklużi: Hydrogen Water Bottle, USB-C Charging Cable

Image: Dimensions and capacity of the HydroLife Peak.
Garanzija u Appoġġ
For warranty information, product registration, or technical support, please refer to the official LifePro webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.
Tista 'żżur il- LifePro Store on Amazon għal aktar informazzjoni dwar il-prodott u riżorsi ta' appoġġ.





