X-PRO 4000W 60V 27AH Electric Dirt Bike User Manual

Introduzzjoni

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 4000W 60V 27AH Electric Dirt Bike (Model DB-E02). Please read this manual thoroughly before initial use and retain it for future reference. This vehicle is designed for off-road use only.

Image: X-PRO E02 4000W Electric Dirt Bike being ridden on a dirt path.

Informazzjoni dwar is-Sigurtà

Always prioritize safety when operating the electric dirt bike. Failure to follow safety guidelines can result in serious injury or damage to the vehicle.

• Wear appropriate safety gear, including a helmet, gloves, and protective clothing.
• Kun żgur li l-komponenti kollha huma mwaħħla sew qabel kull rikba.
• Tħaddimx ir-rota taħt l-influwenza tal-alkoħol jew tad-drogi.
• Familiarize yourself with local regulations regarding electric dirt bike use.
• This vehicle is intended for off-road use only and cannot be officially registered for any purpose.

Setup u Assemblea

Your X-PRO Electric Dirt Bike requires some assembly. Follow these steps carefully. Refer to the assembly video for visual guidance.

Unboxing u Spezzjoni Inizjali

1. Carefully open the shipping carton.
2. Remove the outer cardboard box and metal frame.
3. Locate the accessory box containing tools and small parts.
4. Remove all protective packaging and zip ties from the bike components.

Installazzjoni tal-Manubriju

1. Position the handlebars into the clamps on the fork.
2. Ensure the display and control buttons are correctly oriented.
3. Secure the handlebars using the provided bolts and Allen wrench. Tighten evenly.

Image: Close-up of the X-PRO Electric Dirt Bike handlebars with the display and controls mounted.

Installazzjoni tar-Rota ta ’Quddiem

1. Remove the protective spacer from the front brake caliper.
2. Align the brake rotor with the brake caliper.
3. Insert the front axle through the wheel hub and fork.
4. Secure the axle with the washers and nuts, tightening them firmly with the provided wrenches.

Image: The front wheel of the X-PRO Electric Dirt Bike, highlighting the 19-inch tire and disc brake system.

Installazzjoni ta' Fender ta' wara

1. Attach the rear fender to the designated mounting points on the frame.
2. Use the provided screws and Allen wrench to secure it.

Headlight Cover Installation

1. Position the headlight cover over the front LED light assembly.
2. Align the mounting holes and secure with the provided screws.

Immaġni: Quddiem view of the X-PRO Electric Dirt Bike, showcasing the dual LED headlight.

Istruzzjonijiet Operattivi

Familiarize yourself with the controls and features before riding.

Qawwa mixgħul/mitfi

• To power on the bike, press and hold the power button on the handlebar control panel. The display will illuminate.
• Biex titfi l-apparat, agħfas u żomm il-buttuna tal-qawwa mill-ġdid sakemm id-displej jintefa.

Modi ta 'Veloċità

The bike features 3 safe speed modes:

• L-Ewwel Ger: Approximately 15 mph (25 km/h) for a relaxed pace.
• It-Tieni Ger: Approximately 22 mph (35 km/h) for balanced performance.
• It-Tielet Ger: Approximately 34 mph (55 km/h) for higher speed.

Use the '+' and '-' buttons on the control panel to switch between speed modes.

Headlight and Taillight Operation

• Press the headlight button on the control panel to turn the front LED headlight on or off.
• The rear taillight operates in conjunction with the headlight.

Qarn

Press the green horn button on the left handlebar to activate the horn.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your electric dirt bike.

• Pressjoni tat-Tajers: Iċċekkja l-pressjoni tat-tajers qabel kull rikba. Żomm il-PSI rakkomandat għal prestazzjoni u sigurtà ottimali.
• Brejkijiet: Regularly inspect brake pads and rotors for wear. Ensure brake levers operate smoothly and provide adequate stopping power.
• Katina: Keep the chain clean and lubricated to prevent rust and ensure smooth operation.
• Kura tal-batterija: Charge the 60V 27AH lithium battery fully after each use. Avoid completely draining the battery. Store the bike in a cool, dry place when not in use. Charging time is approximately 5 hours.
• Tindif Ġenerali: Naddaf ir-rota regolarment b'reklamaramp drapp. Evita li tuża ġettijiet tal-ilma bi pressjoni għolja direttament fuq il-komponenti elettriċi.

Issolvi l-problemi

If you encounter issues with your X-PRO Electric Dirt Bike, refer to these common solutions. For persistent problems, contact customer support.

• Bike does not power on: Ensure the battery is fully charged and properly connected. Check all electrical connections.
• Il-mutur mhux qed jaħdem: Verify the power is on and the correct speed mode is selected. Check for any error codes on the display.
• Il-brejkijiet iħossuhom dgħajfa: Inspect brake pads for wear and ensure hydraulic fluid levels are adequate (if applicable). Adjust brake tension if necessary.
• Ħsejjes mhux tas-soltu: Stop riding immediately and inspect the bike for loose parts, chain issues, or foreign objects.

Speċifikazzjonijiet

Image: Diagram illustrating the dimensions and weight specifications of the X-PRO Electric Dirt Bike.

Garanzija u Appoġġ

Your X-PRO Electric Dirt Bike comes with a 1-month warranty. For any questions, technical assistance, or parts inquiries, please visit the X-PRO Store jew ikkuntattja lis-servizz tal-konsumatur.