1. Prodott Aktarview
The Cecotec Bolero Flux TLT 604400 is a 60cm telescopic extractor hood designed for efficient kitchen ventilation. It features a sleek black glass front and a stainless steel body, combining modern aesthetics with durability. This model boasts an A+++ energy rating and a powerful DC motor, ensuring high performance with low energy consumption.
Key features include a suction capacity of 431.2 m³/h, an invisible touch control panel, and innovative Hand Movement Control for adjusting settings without direct contact. It offers 3 speed levels plus a Booster function for intensive extraction, and integrated LED lighting for optimal illumination of your cooking area. The hood is equipped with 5-layer washable aluminum filters and includes carbon filters for recirculation mode.
Figura 1.1: Quddiem view of the Cecotec Bolero Flux TLT 604400 Extractor Hood, highlighting its sleek design and control panel.
Figura 1.2: The 60cm design of the extractor hood, emphasizing its elegant black glass and stainless steel construction.
2. Informazzjoni dwar is-Sigurtà
Please read all safety instructions carefully before installation and use. Retain this manual for future reference.
- Sigurtà Elettrika: Żgura li l-provvista tal-enerġija taqbel mal-voltage specified on the rating plate. The appliance must be properly grounded. Do not pull the power cord to disconnect from the mains.
- Installazzjoni: Installation must be performed by a qualified technician in accordance with local regulations. Maintain the minimum distance between the hob and the lower part of the hood as specified in the installation guide.
- Ventilazzjoni: Aċċerta ruħek li jkun hemm ventilazzjoni adegwata fil-kamra meta l-kappa tintuża simultanjament ma' apparati tal-gass jew apparati oħra li jaħarqu l-fjuwil.
- Tindif: Regularly clean the hood and filters to prevent grease accumulation, which can pose a fire hazard. Do not flambé under the hood.
- Tfal u Persuni Vulnerabbli: Dan l-apparat jista' jintuża minn tfal minn 8 snin 'il fuq u persuni b'kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa jew b'nuqqas ta' esperjenza u għarfien jekk ikunu ngħataw superviżjoni jew struzzjoni dwar l-użu tal-apparat b'mod sikur u jifhmu l-perikli involuti . It-tfal m'għandhomx jilagħbu bl-apparat. It-tindif u l-manutenzjoni tal-utent m'għandhomx isiru minn tfal mingħajr superviżjoni.
- Manutenzjoni: Tippruvax issewwi jew timmodifika l-apparat int stess. Ikkuntattja persunal tas-servizz awtorizzat għal kwalunkwe tiswijiet.
3. Komponenti Inklużi
Meta tiftaħ il-pakkett, ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:
- 1 x Cecotec Bolero Flux TLT 604400 Telescopic Extractor Hood
- 1 x Manwal tal-Utent (dan id-dokument)
- 2 x Carbon Filters (not pre-installed, for recirculation mode)
- Installation hardware (screws, wall plugs, etc. - specific items may vary)
4. Konfigurazzjoni u Installazzjoni
Proper installation is crucial for the safe and efficient operation of your extractor hood. It can be installed in either extraction mode (ducting air outside) or recirculation mode (filtering air and returning it to the kitchen).
4.1. Kontrolli ta 'qabel l-installazzjoni
- Ensure the installation area has sufficient space and structural support.
- Verify the electrical supply is compatible with the hood's requirements (220 Volts).
- If using extraction mode, ensure a suitable ducting route to the outside.
- If using recirculation mode, ensure the carbon filters are installed (see Maintenance section).
4.2. Immuntar tal-Kappa
- Measure and mark the drilling points on the wall or cabinet according to the provided template in the full installation guide.
- Drill toqob u daħħal plugs tal-ħajt.
- Secure the mounting bracket or hood to the wall/cabinet using the appropriate screws.
- Connect the ducting (if in extraction mode) or ensure the recirculation outlet is clear.
- Connect the hood to the electrical supply.
Figura 4.1: Dimensional diagram of the extractor hood, crucial for accurate installation planning.
5. Operazzjoni
Your Cecotec Bolero Flux TLT 604400 extractor hood offers intuitive control options for a seamless cooking experience.
5.1. Control Panel (Invisible Touch Control)
The hood features an invisible touch control panel that becomes visible when the hood is active. When off, it blends seamlessly with the black glass front.
Figura 5.1: The invisible touch control panel, showing power, speed, and light controls.
- Buttuna tal-Qawwa: Press to turn the hood on/off.
- Għażla tal-Veloċità: Cycle through 3 extraction speeds (Low, Medium, High) to suit your cooking needs.
- Funzjoni Booster: Activate for maximum extraction power during intense cooking. This function typically runs for a set period before returning to the previous speed.
- Buttuna tad-Dawl: Turn the integrated LED lighting on/off.
5.2. Hand Movement Control
For enhanced hygiene and convenience, the hood can be operated using hand gestures.
Figura 5.2: Demonstrating the Hand Movement Control feature for adjusting extraction speed.
- Żid il-Veloċità: Wave your hand from left to right in front of the sensor.
- Naqqas il-Veloċità: Wave your hand from right to left in front of the sensor.
- Refer to the full manual for precise sensor location and gesture recognition.
5.3. Extraction Performance and Lighting
Figura 5.3: Visual representation of the hood's powerful 431.2 m³/h suction, ensuring a smoke-free kitchen.
Figura 5.4: The integrated LED lighting provides clear and energy-efficient illumination for your cooking zone.
6. Manutenzjoni
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your extractor hood.
6.1. Cleaning Aluminum Grease Filters
The 5-layer aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain suction efficiency.
Figura 6.1: Illustration of the 5-layer aluminum filter, designed to capture grease effectively.
- Turn off and unplug the hood from the power supply.
- Open the hood panel and release the filter latches. Carefully remove the aluminum filters.
- Il-filtri jistgħu jinħaslu fil-magna tal-ħasil tal-platti. Inkella, aħsilhom bl-idejn b'ilma sħun u deterġent ħafif. Kun żgur li jkunu niexfa għalkollox qabel ma terġa' tinstallahom.
- Re-install the filters, ensuring they are securely latched.
6.2. Replacing Carbon Filters (Recirculation Mode)
If your hood is operating in recirculation mode, the carbon filters absorb odors and should be replaced every 3-6 months, depending on usage.
Figura 6.2: Carbon filters, essential for improving air quality in recirculation mode.
- Turn off and unplug the hood from the power supply.
- Remove the aluminum grease filters as described above.
- Locate the carbon filters (usually attached to the motor housing). Remove the old carbon filters by twisting or unlatching them.
- Install new carbon filters, ensuring they are securely in place.
- Re-install the aluminum grease filters.
6.3. Tindif ta' barra
Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the stainless steel or glass finish.
7 Issolvi l-problemi
Qabel ma tikkuntattja l-appoġġ għall-klijenti, jekk jogħġbok irreferi għall-kwistjonijiet u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-kappa ma tixgħelx | No power supply; Power cord not plugged in; Fuse blown; Control panel malfunction. | Check power connection; Check circuit breaker/fuse box; Contact qualified technician if issue persists. |
| Qawwa baxxa ta 'ġbid | Grease filters clogged; Carbon filters saturated (recirculation mode); Ducting obstructed; Incorrect installation distance from hob. | Clean aluminum filters; Replace carbon filters; Check ducting for obstructions; Verify installation height. |
| Storbju eċċessiv | Loose components; Improper installation; Obstruction in fan; Motor issue. | Check for loose screws or parts; Ensure correct installation; Inspect fan for foreign objects; Contact service if motor noise is unusual. |
| Id-dwal ma jaħdmux | LED bulb failure; Electrical connection issue. | Check if lights are properly connected; Replace LED bulbs if necessary (consult manual for type); Contact service. |
| Hand Movement Control unresponsive | Sensor obstructed or dirty; Incorrect gesture. | Clean the sensor area; Ensure clear path for gestures; Refer to operation section for correct gestures. |
8. Speċifikazzjonijiet
Detailed technical specifications for the Cecotec Bolero Flux TLT 604400 Extractor Hood:
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | A01_EU01_110282 |
| Brand | Cecotec |
| Dimensjonijiet tal-Prodott | 60 x 22 x 46.3 ċm (Tul x Wisa x Għoli) |
| Piż | 5.99 kg |
| Kulur | Iswed |
| Kapaċità ta 'Ġbid | 431.2 m³/h |
| Klassi tal-Enerġija | A+++ |
| Tip ta' Mutur | Mutur DC |
| Tip ta' Kontroll | Invisible Touch Control, Hand Movement Control |
| Livelli ta' Veloċità | 3 speeds + Booster function |
| Dawl | Dawl LED integrat |
| Filtri | 5-layer washable aluminum filters, Carbon filters included (for recirculation) |
| Livell ta' Storbju | 62 Deċibel |
| Voltage | 220 Volts |
| Pajjiż ta' Oriġini | Spanja |
9. Garanzija u Appoġġ
Cecotec is committed to providing high-quality products and customer satisfaction.
9.1. Disponibbiltà ta' Spare Parts
Spare parts for this appliance are guaranteed to be available for a duration of 10 snin within the EU, ensuring long-term usability and repairability.
9.2. Appoġġ għall-Klijent
For technical assistance, warranty claims, or to purchase spare parts, please contact Cecotec customer service through their official website or the contact information provided with your purchase documentation. When contacting support, please have your model number (TLT 604400 or A01_EU01_110282) and purchase date ready.
