ECO-WORTHY MPPT Solar Charge Controller

1. Introduzzjoni

This manual provides essential information for the safe installation, operation, and maintenance of your ECO-WORTHY MPPT Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Kontenut tal-Pakkett:

• 1x 20A MPPT Solar Charge Controller
• 1x 1.5m Temperature Sensor
• 5x M4*30mm Screws
• 5x M6*30mm Expansion Screws
• 1x English Language Instruction Manual

2. Istruzzjonijiet tas-Sigurtà

Jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin waqt l-installazzjoni u t-tħaddim:

• Ensure all wiring is correctly polarized (positive to positive, negative to negative).
• Always connect the battery to the charge controller FIRST, then the solar panel, and finally the load. Disconnect in reverse order.
• Uża gauges tal-wajer xierqa għall-konnessjonijiet kollha biex tevita li jisħnu żżejjed.
• Install the controller in a well-ventilated area, away from direct sunlight, high temperatures, and water.
• Ensure proper ventilation clearance above and below the controller (at least 100mm above and 200mm below).
• Tiżżarmax jew tippruvax issewwi l-kontrollur int stess. Ikkuntattja persunal kwalifikat għas-servizz.

3. Prodott Aktarview

The ECO-WORTHY MPPT Solar Charge Controller is designed for efficient power management in off-grid solar systems. It features a clear LCD display, intuitive buttons, and robust terminals for reliable connections.

Figura 3.1: Quddiem view of the ECO-WORTHY 20A MPPT Solar Charge Controller with Bluetooth app monitoring.

Karatteristiċi ewlenin:

• Bluetooth Monitoring: Built-in Bluetooth allows remote monitoring and parameter setting via a mobile application (10-40 meters range).
• Multi-Battery Compatibility: Automatically identifies 12V/24V battery types (GEL, SLA, FLD, LFP) and supports lithium battery activation.
• MPPT ta' Effiċjenza Għolja: Achieves ≥99% tracking efficiency and ≥99% peak conversion efficiency for optimal solar energy utilization.
• Display LCD: High-resolution display shows real-time working status, fault information, battery type, and voltage data.
• Intelliġenti 3-Stage Iċċarġjar: Includes bulk charging, balanced charging, and float charging to extend battery life.
• Multi-Protection Functions: Equipped with over-voltage, over-charging, over-discharging, over-temperature, and short-circuit protections.

Figura 3.2: Dettaljat view tal-wiri LCD u l-buttuni tal-kontroll.

4. Setup u Installazzjoni

Follow these steps for safe and correct installation of your solar charge controller.

4.1 Immuntar tal-Kontrollur

Choose a vertical surface protected from direct sunlight, high temperatures, and water. Ensure good ventilation around the controller.

• Agħżel Post tal-Immuntar: Select a vertical surface protected from direct sunlight, high temperatures, and water. Ensure good ventilation.
• Immarka toqob: Use the provided mounting template to mark the screw positions on the wall.
• Waħħal il-viti: Install screws at the marked positions, leaving a small gap for mounting.
• Align and Mount: Align the controller with the screws and slide it into place. Tighten the screws securely.

4.2 Konnessjonijiet tal-Wiring

Follow the connection sequence carefully to avoid damage to the controller or other components.

1. Qabbad il-batterija: Connect the battery to the controller's battery terminals (+ and -). Ensure correct polarity. The controller will power on and display battery voltage.
2. Qabbad il-Panel Solari: Connect the solar panel to the controller's PV terminals (+ and -). Ensure correct polarity.
3. Qabbad it-Tagħbija: Connect your DC loads to the controller's load terminals (+ and -). Ensure correct polarity.

Figure 4.1: 3-Step Connection Diagram.

4.3 Installation Video Guide:

5. Istruzzjonijiet Operattivi

The controller features an LCD display and buttons for easy operation and monitoring. It also supports Bluetooth connectivity for app-based control.

5.1 Wiri u Buttuni LCD

The LCD displays various parameters such as PV voltage, batterija voltage, charging current, and load status. Use the buttons to navigate through the display pages and adjust settings.

• Stampa qasira: Cycles through different display pages (e.g., operating status, fault information, battery type, voltage data).
• Stampa Twila: Enters or exits the setting mode for adjustable parameters.
• Buttuni 'l fuq /' l isfel: Used to adjust values when in setting mode.

5.2 Għażla tat-Tip ta' Batterija

The controller automatically identifies 12V/24V battery types. However, you can manually select the battery type if needed, especially for lithium batteries to ensure proper charging parameters.

• Long press the 'SET' button to enter parameter setting mode.
• Use the 'UP' or 'DOWN' buttons to navigate to the battery type setting.
• Use the 'SET' button to select the desired battery type (GEL, SLA, FLD, LFP, etc.).
• Long press 'SET' again to save and exit.

5.3 Bluetooth APP Monitoring

Download the dedicated mobile application to monitor your system remotely and adjust parameters. The app provides real-time data and historical trends.

• Kun żgur li l-Bluetooth huwa attivat fuq it-tagħmir mobbli tiegħek.
• Open the ECO-WORTHY app and search for your controller.
• Connect to the controller to view real-time data and access settings.

6. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-kontrollur tal-iċċarġjar solari tiegħek.

• Spezzjona perjodikament il-konnessjonijiet tal-wajers kollha għal issikkar u korrużjoni.
• Clean the controller's exterior with a dry cloth to remove dust and debris.
• Ensure the ventilation areas are clear and unobstructed.
• Check the battery terminals for any signs of corrosion and clean if necessary.

7 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil-kontrollur tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

• Il-Kontrollur Mhux Qed Jixgħel: Check battery connections and ensure correct polarity. Verify battery voltage huwa fil-medda operattiva.
• L-ebda Kurrent tal-Iċċarġjar: Check solar panel connections and ensure they are receiving sufficient sunlight. Verify solar panel voltage jinsab fil-medda tal-input tal-kontrollur.
• It-Tagħbija Mhux Taħdem: Check load connections and ensure correct polarity. Verify load output is enabled in the controller settings. Check for any short circuits in the load wiring.
• App Disconnection: Ensure the controller is within Bluetooth range (10-40m unobstructed). Restart the app or re-pair the device.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please refer to the contact information provided in your product packaging or on the ECO-WORTHY official websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.