1. Introduzzjoni
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your UTRAI JS-30 Jump Starter with Air Compressor and OBD II Scanner. Please read this manual thoroughly before using the device and retain it for future reference.
2. Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek. Jekk xi oġġetti huma neqsin jew bil-ħsara, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
- UTRAI JS-30 Portable Car Battery Jump Starter Pack
- Heavy Duty Smart Clamp
- Cable tal-Iċċarġjar tal-USB-C
- OBDⅡ Scanner
- Manka tal-Ajru
- Valve Connector (4 multi-purpose nozzles)
- DC Cigarette Lighter Converter
- Ingwanti iżolati
- Portable Storage Case (EVA Protection Case)
- User Guide (Instruction Manual)
- Karta ta' Garanzija Limitata ta' Sena
Image: The UTRAI JS-30 Jump Starter unit with its heavy-duty smart clamps, USB-C charging cable, OBD II scanner, air hose, various valve connectors, and insulated gloves, all neatly arranged.
3. Informazzjoni dwar is-Sigurtà
Your safety is paramount. This device incorporates multiple safety features. Always follow these guidelines to prevent injury or damage to the device or vehicle.
- V0 Flame-Retardant Casing: The device is constructed with fireproof materials for enhanced safety.
- Intelligent Protection Chips: Built-in chips prevent over-discharge, reverse polarity, sparks, overvoltage, overheating, and over-current.
- Temperatura operattiva: Use the device within the recommended temperature range.
- Ventilazzjoni: Ensure adequate ventilation during operation, especially when using the air compressor.
- Protezzjoni tal-għajnejn: Always wear safety glasses when jump-starting a vehicle.
- Tfal: Żomm l-apparat fejn ma jintlaħaqx mit-tfal.
Image: A visual representation of the 10 intelligent safety protections, including spark resistance, short-circuit protection, reverse connection, over-power protection, over-discharge protection, over-charge protection, over-heat protection, over-current protection, and over-voltagprotezzjoni.
4. Iċċarġjar tal-Apparat
Before first use, fully charge your UTRAI JS-30. It is recommended to recharge the device after each use to ensure it is ready for the next emergency.
- Connect the provided USB-C charging cable to the USB-C input port on the device.
- Connect the other end of the USB-C cable to a compatible USB wall adapter (not included) or the provided DC adapter for car charging.
- The digital display will indicate the charging status. The device is fully charged when the display shows 100%.
5. Istruzzjonijiet Operattivi
5.1 Aqbeż Startjar ta' Vettura
The UTRAI JS-30 delivers 7000A peak current, capable of starting all 12V cars, SUVs, trucks, motorcycles, ATVs, boats, and diesel engines up to 12L.
- Kun żgur li l-jump starter huwa ċċarġjat biżżejjed.
- Daħħal is-smart clamp plug into the jump starter's 12V output port. The device will show a green light indicating it's ready.
- Qabbad il-ċl aħmar (pożittiv).amp mat-terminal pożittiv (+) tal-batterija tal-vettura.
- Qabbad l-iswed (negattiv) clamp mat-terminal negattiv (-) tal-batterija tal-vettura.
- If the vehicle battery is completely dead, press and hold the 'Boost Mode' button on the smart clamp for 3 seconds to force start.
- Ibda l-magna tal-karozza.
- Ladarba tibda l-magna, neħħi immedjatament is-smart clamps from the vehicle battery, then disconnect the smart clamp mill-jump starter.
Image: Step-by-step illustration of inserting the clamp plug, connecting smart clamps to the car battery, and starting the car engine.
5.2 L-Użu tal-Kompressur tal-Arja
The 150PSI smart air compressor can inflate tires for various vehicles and inflatables.
- Screw the air hose into the air output port on the jump starter.
- Attach the appropriate valve connector to the air hose and then to the item you wish to inflate.
- Agħfas il-buttuna tal-qawwa biex tixgħel l-apparat.
- Select the desired mode (car, motorcycle, bike, ball, or custom) using the 'M' button. Long press 'M' to switch units (PSI, BAR, KPA, kg/cm²).
- Adjust the target air pressure using the '+' and '-' buttons.
- Press the inflation button to start the compressor. The device will automatically shut off once the target pressure is reached.
Image: Illustration showing how to connect the air hose, select the mode, adjust target pressure, and activate inflation.
5.3 L-użu tad-Dawl LED
The device features a 2000-lumen LED floodlight with multiple modes for various situations.
- Press the light button to cycle through modes: Flashlight, Strobe (white), SOS, Strobe (red), and Spotlight.
- The 90° rotatable panel allows for adjustable illumination.
Image: The UTRAI JS-30's multi-functional LED light providing illumination for an outdoor gathering, highlighting its various modes like flashlight, strobe, and SOS.
5.4 Użu bħala Power Bank
The 16000mAh power bank can charge phones, tablets, cameras via dual USB ports, and power 12V appliances with its 160W DC output.
- Connect your electronic device to one of the dual USB output ports using a compatible USB cable.
- For 12V appliances, use the provided DC cigarette lighter converter and plug it into the 12V DC output port.
Image: The UTRAI JS-30 acting as a portable power hub, charging a smartphone, tablet, and other small electronics via its USB and DC output ports.
5.5 Using the OBD II Scanner
The included OBD II diagnostic tool allows you to read fault codes and monitor vehicle performance.
- Download the YMBOD app from your smartphone's app store.
- Plug the OBD II scanner into your car's OBD2 port (usually located under the dashboard).
- Use Bluetooth on your phone to connect to the scanner via the YMBOD app.
- Access detailed diagnostics, check engine performance, and monitor fuel efficiency through the app.
Image: Illustration showing the steps to download the YMBOD app, plug in the OBD II adapter, and connect via Bluetooth for vehicle diagnostics.
6. Manutenzjoni u Ħażna
- Store the device in its EVA protection case when not in use.
- Żomm l-apparat f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Recharge the device every 3-6 months if not used regularly to maintain battery health.
- Naddaf l-apparat b'ċarruta niexfa u ratba. Tużax kimiċi ħarxa jew materjali li joborxu.
7 Issolvi l-problemi
- Apparat mhux qed jixgħel: Ensure the device is charged. If fully charged and still not turning on, contact support.
- Il-vettura ma tixgħelx: Iċċekkja li l-ismart clamps are correctly connected to the battery terminals (red to positive, black to negative). Ensure the smart clamp indicator is green. If the battery is completely dead, use the Boost Mode.
- Il-kompressur tal-arja mhux qed jintefaħ: Verify the air hose and valve connector are securely attached. Check the selected mode and target pressure. Ensure the device is charged.
- OBD II scanner not connecting: Ensure the scanner is properly plugged into the OBD2 port and your phone's Bluetooth is enabled. Restart the app and try reconnecting.
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | UTRAI |
| Mudell | JS-30 |
| L-ogħla Kurrent tal-Ħruġ | 7000 Amps |
| Pressjoni tal-Kompressur tal-Arja | 150 PSI |
| Kapaċità tal-batterija | 16000mAh |
| Produzzjoni DC | 160W (12V) |
| LED Floodlight Luminosity | 2000 Lumens |
| Dimensjonijiet tal-Prodott | 2.27"D x 9.09"W x 4.8"H |
| Piż tal-oġġett | 2.64 libbra (1.2 Kilogrammi) |
9. Vidjo Uffiċjali tal-Prodott
Video: An official product video from UTRAI demonstrating the features and usage of the UTRAI Jump Starter with Air Compressor.
10. Garanzija u Appoġġ
The UTRAI JS-30 Jump Starter comes with a 24-month warranty and lifetime technical support. For any questions, issues, or warranty claims, please contact UTRAI customer service.
- Servizz tal-Klijent: Disponibbli 7 ijiem fil-ġimgħa, 24 siegħa kuljum.
- Appoġġ Tekniku: Appoġġ tekniku tul il-ħajja huwa pprovdut.
- Kopertura tal-garanzija: 24 months of coverage for defects.
