1. Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your Carrera GO!!! Champion's Racing Slot Car Race Track Set. This set offers a realistic racing experience with two 1:43 scale cars, a track spanning over 14 feet, and includes a lap counter for competitive play. Please read these instructions carefully before use to ensure proper setup and enjoyment.
2. Informazzjoni dwar is-Sigurtà
Caution - Electric Toy - Not recommended for children under 8 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.
3. X'hemm fil-Kaxxa
Ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:
- Carrera GO 1:43 Scale Track sections
- Adapter tal-Enerġija
- Two 1:43 Scale Carrera GO Cars (Oracle Red Bull Racing RB21 "M. Verstappen, No.1" and Ferrari SF-25 "L. Hamilton, No.44")
- Two Speed Controllers with Turbo Boost
- Lap Counter
- Track Supports and Guardrails
- Manwal ta 'Istruzzjoni (dan id-dokument)
Immaġni: Fuqview of the Carrera GO!!! Champion's Racing Slot Car Race Track Set, showing the track layout, two race cars, and controllers.
4. Istruzzjonijiet ta' Setup
Follow these steps to assemble your Carrera GO!!! race track:
- Ipprepara l-wiċċ: Choose a flat, stable surface for assembly. The recommended track layout dimensions are 6.00 ft x 2.62 ft.
- Assemble the Track: Connect the track sections firmly. Ensure all connections are secure to maintain electrical continuity. The set includes straightaways, curves, and a track crossover. Refer to the included layout diagram for guidance.
- Install Supports and Guardrails: Place track supports under elevated sections and attach guardrails to the outer edges of curves to prevent cars from leaving the track.
- Connect the Lap Counter: Integrate the lap counter section into the track layout as indicated in the diagram.
- Connect Power and Controllers:
- Connect the connection track piece to the main track layout.
- Plug the two speed controllers into the designated ports on the connection track.
- Connect the power adapter to the connection track, then plug the adapter into a suitable electrical outlet.
- Ipprepara l-Karozzi: Place the Oracle Red Bull Racing RB21 and Ferrari SF-25 cars onto the track, ensuring the guide pins are correctly seated in the track slots and the double contact brushes are making full contact with the track rails.
Immaġni: Dettaljata view of the assembled Carrera GO!!! track layout, showing the various track sections, lap counter, and supports.
5. Istruzzjonijiet Operattivi
Once the track is assembled and powered, you are ready to race:
- Starting the Race: Ensure both cars are correctly positioned on their respective track slots.
- Using the Speed Controller: Press the trigger on your speed controller to accelerate your car. The further you press, the faster the car will go.
- Turbo Boost: Each controller features a turbo boost button. Press this button for a temporary burst of speed, useful for overtaking or navigating straightaways.
- Corners: Reduce speed when approaching curves to prevent your car from derailing. The magnets in the cars help keep them on track, but excessive speed in turns will cause them to fly off.
- Lap Counting: The integrated lap counter will automatically record laps as cars pass over it.
Image: Close-up of the Oracle Red Bull Racing RB21 slot car, showing its detailed design and guide pin.
Image: Close-up of the Ferrari SF-25 slot car, highlighting its design and contact brushes.
Image: The two Carrera GO!!! speed controllers, featuring the trigger for acceleration and the red button for turbo boost.
6. Manutenzjoni
Regular maintenance ensures optimal performance and longevity of your slot car set:
- Tindif tal-binarji: Periodically wipe down the track rails with a clean, dry cloth to remove dust and debris, which can interfere with electrical contact.
- Car Contact Brushes: Ensure the double contact brushes underneath each car are clean and positioned correctly to make good contact with the track. Replace worn brushes as needed.
- Wheel and Axle Inspection: Check car wheels and axles for any hair or lint that might impede smooth movement. Remove any obstructions carefully.
- Car Body Inspection: Inspect car bodies, especially spoilers and other delicate parts, for damage. Minor breaks can often be repaired with appropriate adhesive.
- Ħażna: When not in use, store the track and cars in a clean, dry place away from direct sunlight and extreme temperatures.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-karozza ma tiċċaqlaqx jew tiċċaqlaq b'mod intermittenti. |
|
|
| Car frequently derails on curves. |
|
|
| Car parts (e.g., spoilers) break easily. |
|
|
8. Speċifikazzjonijiet
- Numru tal-Mudell: 20062603
- Tul tal-binarju: 14.11 pied (4.3 metru)
- Track Layout Dimensions (assembled): 6.00 pied x 2.62 pied (183 cm x 80 cm)
- Skala tal-Karozza: 1:43
- Cars Included: Oracle Red Bull Racing RB21 "M. Verstappen, No.1", Ferrari SF-25 "L. Hamilton, No.44"
- Età Rakkomandata: 6 snin 'il fuq
- Product Dimensions (Box): 22.83 x 15.74 x 3.15 pulzieri
- Piż tal-oġġett: 6.04 liri
- Manifattur: Carrera
- Data ta' Rilaxx: 5 ta’ Settembru, 2025
9. Garanzija u Appoġġ
For specific warranty information, please refer to the documentation included with your product packaging or visit the official Carrera website. For technical support or inquiries regarding replacement parts, please contact Carrera customer service directly.
Tista' ssib aktar informazzjoni u dettalji ta' kuntatt fuq Ħanut Carrera fuq Amazon.
