YISENCE 4K Underwater Camera 4k806 User Manual

1. Introduzzjoni

Thank you for choosing the YISENCE 4K Underwater Camera, model 4k806. This manual provides essential information for setting up, operating, and maintaining your camera to ensure optimal performance and longevity. Please read this manual thoroughly before using the camera.

Image 1.1: YISENCE 4K Underwater Camera 4k806 with included 32GB Micro SD card.

2. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• YISENCE 4K Underwater Camera (Model 4k806)
• 32GB Mikro SD Card
• Kejbil tal-Iċċarġjar tat-Tip C
• Manwal għall-Utent (dan id-dokument)
• Ċinga tal-polz (tista' tvarja skont il-pakkett)

3. Camera Matulview

Iffamiljarizza ruħek mal-komponenti u l-kontrolli tal-kamera.

Immaġni 3.1: Quddiem u Wara Views of the Camera.

Komponenti Ewlenin:

• Skrin ta' quddiem: For selfie mode.
• Skrin ta' wara: Main display for viewing and settings.
• Lenti: Digital lens with 16x digital zoom.
• Flash: Flash integrat għal kundizzjonijiet ta' dawl baxx.
• Buttuna tas-shutter: To capture photos and start/stop video recording.
• Buttuna tal-Qawwa: Biex tixgħel/titfi l-kamera.
• Buttuna tal-Modalità: To switch between photo, video, and playback modes.
• Buttuni tan-Navigazzjoni: For menu navigation and zoom control (W/T).
• Battery/SD Card Compartment: Located on the side, sealed for waterproofing.

4. Setup

4.1. Iċċarġjar tal-batterija

The camera is equipped with a 1250mAh Lithium-Ion battery. Before first use, fully charge the battery.

1. Sib il-kompartiment tal-batterija fuq il-ġenb tal-kamera.
2. Slide the small button over and push forward to open the compartment.
3. Insert the battery if not already installed.
4. Connect the camera to a power source using the provided Type-C USB cable.
5. The charging indicator light will illuminate (e.g., green) while charging and turn off when fully charged.

Important: Ensure the battery compartment is securely closed and latched before any water exposure to maintain waterproofing.

Image 4.1: The 1250mAh battery provides approximately 70 minutes of operation underwater.

4.2. Daħħal il-Micro SD Card

The camera supports Micro SD cards up to 128GB. A 32GB card is included.

1. Open the battery compartment as described above.
2. Sib l-islott tal-karta Micro SD.
3. Insert the Micro SD card with the gold contacts facing the correct direction (refer to the diagram inside the compartment if available) until it clicks into place.
4. Agħlaq il-kompartiment tal-batterija sew.

Warning: Failure to properly insert the SD card or secure the compartment can lead to data loss or water damage.

5. It-tħaddim tal-Kamera

5.1. Power On/Off

• Biex tixgħel, agħfas u żomm il-buttuna Power.
• Biex titfi, agħfas u żomm il-buttuna tal-Enerġija mill-ġdid.

5.2. Teħid tar-Ritratti

The camera captures photos at up to 56MP resolution.

1. Ensure the camera is in Photo mode (use the Mode button to switch).
2. Frame your shot using the rear or front screen.
3. For autofocus, half-press the Shutter button. The focus frame on the screen will turn green when focus is achieved.
4. Fully press the Shutter button to capture the photo.

Image 5.1: Autofocus in action, indicated by the green frame.

5.3. Reġistrar Vidjows

The camera records videos in 4K resolution (AVI format).

1. Aqleb għall-modalità Video billi tuża l-buttuna Mode.
2. Press the Shutter button to start recording. A recording indicator will appear on the screen.
3. Agħfas il-buttuna Shutter għal darb'oħra biex tieqaf tirrekordja.

Image 5.2: 4K video recording interface.

5.4. Dual-Screen Selfie Function

The camera features a front screen for easy selfie composition.

• When in Photo or Video mode, the camera automatically uses the appropriate screen.
• To switch between screens, look for a dedicated button or menu option (refer to on-screen prompts).

5.5. Zoom Diġitali

Use the W (Wide) and T (Telephoto) buttons to adjust the 16x digital zoom.

5.6. Settings oħra

The camera includes various settings accessible via the menu:

• Flash: Toggle on/off or set to auto.
• Modi tax-Xena: Optimize settings for different environments.
• Riżoluzzjoni tar-Ritratti: Aġġusta l-kwalità tal-immaġni.
• Kontra t-Tħawwad: Digital image stabilization.
• Sejbien tal-wiċċ: Helps focus on faces.
• Sparar Kontinwu: Capture multiple photos in quick succession.
• Self-Timer: Set a delay before taking a photo.

5.7. Riviewing u Tħassir tal-Midja

• Switch to Playback mode using the Mode button.
• Use the navigation buttons to browse through photos and videos.
• To delete a single photo, select it, then access the menu for the delete option. Confirm deletion for each item.
• To delete all media, select the 'Delete All' option from the menu.
• Individual photos can be locked to prevent accidental deletion.

6. Użu li ma jgħaddix ilma minnu

The YISENCE 4k806 camera is waterproof up to 11 feet (3.3 meters).

Image 6.1: The camera is designed for underwater exploration up to 11 feet.

6.1. Before Water Exposure

• Ensure the battery and SD card compartment is completely sealed and latched.
• Check for any debris or foreign objects around the seals that could compromise waterproofing.
• Confirm the camera is free from cracks or damage.

6.2. During Water Exposure

• Do not exceed the 11-foot depth limit.
• Avoid opening the battery/SD card compartment while wet or submerged.
• The camera is floatable, which can help prevent loss in water.

Image 6.2: The camera's floatable design for easy retrieval.

6.3. After Water Exposure

• Rinse the camera with fresh water to remove salt, sand, or chlorine.
• Imsaħ il-kamera niexfa b'ċarruta ratba.
• Allow the camera to air dry completely before opening the battery/SD card compartment.

7. Manutenzjoni

7.1. Tindif

• Use a soft, lint-free cloth to clean the camera body and screens.
• Għal-lenti, uża drapp u soluzzjoni speċjalizzati għat-tindif tal-lentijiet biex tevita l-grif.
• Tużax tindif jew solventi li joborxu.

7.2. Ħażna

• Aħżen il-kamera f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Jekk taħżinha għal perjodu estiż, neħħi l-batterija.

8 Issolvi l-problemi

8.1. Il-Kamera Mhux Tixgħel

• Kun żgur li l-batterija hija kompletament iċċarġjata.
• Iċċekkja li l-batterija tkun imdaħħla sew.

8.2. Kwalità Fqira tal-Immaġni/Vidjo

• Naddaf il-lenti.
• Check lighting conditions; the camera may perform less optimally in very low light without flash.
• Ensure the camera is in focus (half-press shutter for autofocus).
• Verify resolution settings are set to desired quality.

8.3. Tnixxija ta 'Ilma

• Immediately remove the camera from water.
• Open the battery compartment and remove the battery and SD card.
• Allow the camera to dry completely.
• Inspect the seals for damage or debris. If damage is found, discontinue use and contact support.

8.4. Żball tal-Kard SD

• Kun żgur li l-kard SD hija mdaħħla sew.
• Try formatting the SD card (this will erase all data).
• Test with a different compatible Micro SD card.

Għal aktar assistenza, jekk jogħġbok irreferi għat-taqsima tal-Garanzija u l-Appoġġ.

9. Speċifikazzjonijiet

Detailed technical specifications for the YISENCE 4K Underwater Camera 4k806.

Image 9.1: Camera dimensions and weight.

10. Garanzija u Appoġġ

10.1. Informazzjoni dwar Garanzija

The YISENCE 4K Underwater Camera 4k806 comes with a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or failure to follow the instructions in this manual.

10.2. Appoġġ għall-Klijent

If you encounter any issues or have questions not addressed in this manual, please contact YISENCE customer support. Refer to the product packaging or the official YISENCE websit għad-dettalji tal-kuntatt.