1. Introduzzjoni
Thank you for choosing the AIYIMA P600 6.5" Bookshelf Speakers. These passive speakers are designed to deliver high-fidelity audio for desktop and home audio stereo systems. This manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and longevity of your speakers.
2. Prodott Aktarview
2.1 Kontenut tal-Pakkett
- One pair of AIYIMA P600 Passive Bookshelf Speakers
- Manwal għall-Utent
- Rubber Feet (8 pieces)
Image: The AIYIMA P600 speakers shown with the user manual and rubber feet included in the package.
2.2 Karatteristiċi ewlenin
- 6° Elevated Design: The unique 6-degree upward-tilting baffle design angles tweeters towards your ears for an optimized desktop listening experience.
- Carbon Fiber Woofer: Equipped with a 6.5-inch carbon fiber composite cone woofer for tight, precise, and impactful low-frequency performance down to 30Hz.
- Silk Dome Horn Tweeter: Features a 25mm imported silk dome tweeter loaded into an acoustic horn waveguide for detailed and smooth high-frequency reproduction.
- Solid Build Quality: Constructed with an 18mm thick MDF front baffle and 15mm walls to minimize resonance, with high-quality polyfill damping.
- Gold-plated Binding Posts: Ensures maximum signal transfer from your ampaktar ħaj.
Immaġni: Dettaljata view highlighting the 25mm silk dome horn tweeter and the 6.5-inch carbon fiber woofer of the AIYIMA P600 speaker.
Image: A diagram showing the side profile of the AIYIMA P600 speaker, emphasizing its 6-degree upward tilt.
3. Setup
3.1 Poġġiment ta' Speaker
For optimal sound, place the speakers on a stable surface such as a desktop or speaker stands. The 6-degree tilted design is specifically engineered for desktop listening, directing sound towards your ears. Ensure there is adequate space around the speakers for proper sound dispersion and to prevent obstruction of the rear port (if applicable).
3.2 Konnessjoni ma' Ampaktar ħaj
The AIYIMA P600 are passive speakers and require an external amplifier or AV receiver to operate. Follow these steps to connect your speakers:
- Tiżgura tiegħek amplifier/receiver is turned off and unplugged from the power outlet.
- Use high-quality speaker wire to connect the speakers to the amplifier. Match the positive (+) terminal on the speaker (red) to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker (black) to the negative (-) terminal on the ampaktar ħaj.
- The P600 speakers feature gold-plated binding posts for secure and efficient connections. Unscrew the binding post cap, insert the stripped speaker wire, and tighten the cap firmly.
- Once both speakers are connected, plug in and turn on your amplifier/riċevitur.
Immaġni: Close-up view of the gold-plated binding posts on the back of an AIYIMA P600 speaker, showing the connection terminals.
Image: A comprehensive diagram illustrating how different audio sources (CD player, pre-amplifier, streamer, DAC, computer) connect to an amplifier (e.g., AIYIMA A20), which then outputs to the AIYIMA P600 passive speakers.
4. Istruzzjonijiet Operattivi
Once properly connected to an amplifier, the AIYIMA P600 speakers are ready for use. Control volume and source selection through your connected amplifier or audio source device. Ensure the amplifier's power output is within the recommended range for the P600 speakers (up to 150 Watts) to prevent damage.
5. Manutenzjoni
To maintain the appearance and performance of your AIYIMA P600 speakers, follow these guidelines:
- Tindif: Use a soft, dry cloth to wipe down the speaker cabinets. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Tneħħija tat-Trab: Gently use a soft brush or a vacuum cleaner with a brush attachment to remove dust from the speaker cones and grilles.
- Ambjent: Keep speakers away from direct sunlight, excessive heat, moisture, and extreme temperature changes.
- Immaniġġjar: Avoid touching the speaker cones directly, as this can cause damage.
6 Issolvi l-problemi
If you encounter issues with your AIYIMA P600 speakers, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ħoss mill-kelliema | Loose speaker wire connections; Amplifier not powered on or set to correct input; Ampmalfunzjoni tal-lifier. | Iċċekkja l-konnessjonijiet kollha tal-wajers tal-ispiker kemm fl-ispiker kif ukoll amplifier ends. Ensure amplifier is powered on and the correct input source is selected. Test amplifier with other speakers if available. |
| Ħoss distort jew mhux ċar | Overdriving speakers (volume too high); Incorrect impedance match; Damaged speaker wire; Ampkwistjonijiet ta 'lifier. | Reduce volume. Ensure amplifier impedance matches speaker impedance (4 Ohm). Inspect speaker wires for damage. Consult amplifier manual for troubleshooting. |
| Kelliem wieħed mhux qed jaħdem | Faulty speaker wire; Loose connection; AmpKwistjoni tal-kanal tal-lifer. | Swap speaker wires between left and right channels at the amplifier to determine if the issue is with the speaker or the amplifier channel/wire. Check connections. |
If the problem persists after trying these solutions, please contact AIYIMA customer support or your retailer for further assistance.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | P600 |
| Tip ta' Kelliem | Bookshelf, Passive |
| Daqs tal-Woofer | 6.5 Inches (Carbon Fiber) |
| Tip ta 'Tweeter | 25mm Silk Dome Horn Tweeter |
| Rispons ta' Frekwenza | 30Hz-20kHz |
| Impedenza | 4 Ohm |
| Qawwa tal-Ħruġ Massimu tal-Ispeaker | 150 Watts |
| Dimensjonijiet tal-Prodott (kull wieħed) | 10.63"D x 8.27"W x 13.98"Għ (270mm D x 210mm W x 355mmGħ) |
| Piż tal-Oġġett (par) | 27.7 libbra (12.57 Kilogrammi) |
| Materjal | Injam (MDF) |
| Teknoloġija tal-Konnettività | Bil-fili |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
The AIYIMA P600 speakers come with a Limited Warranty. Please refer to the warranty card included in your package or visit the official AIYIMA websit għal termini u kundizzjonijiet dettaljati dwar il-kopertura u t-tul tal-garanzija.
8.2 Appoġġ għall-Klijent
For technical assistance, troubleshooting, or any inquiries regarding your AIYIMA P600 speakers, please contact AIYIMA customer support. You can find contact information on the official AIYIMA websit jew permezz tal-bejjiegħ bl-imnut tax-xiri tiegħek.
