Cecotec Conga Rockstar RX70 AquaPet Flex Cordless Stick Vacuum Cleaner User Manual

1. Istruzzjonijiet tas-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha tas-sigurtà bir-reqqa qabel ma tuża l-apparat. Żomm dan il-manwal għal referenza futura.

• Tiżgura l-provvista tal-enerġija voltage jaqbel mal-voltage indikat fuq l-appliance.
• Do not immerse the motor unit, battery, or charger in water or other liquids.
• Żomm ix-xagħar, il-ħwejjeġ laxki, is-swaba’, u l-partijiet kollha tal-ġisem 'il bogħod minn fetħiet u partijiet li jiċċaqilqu.
• Do not vacuum flammable or combustible materials, hot ashes, or sharp objects.
• This appliance is for household use only. Do not use outdoors or on wet surfaces unless specifically designed for it (e.g., mopping function).
• Issorvelja lit-tfal biex tiżgura li ma jilagħbux bl-apparat.
• If the power cord or plug is damaged, contact authorized technical support.

2. Komponenti tal-Prodott

Familiarize yourself with the components included with your Cecotec Conga Rockstar RX70 AquaPet Flex vacuum cleaner.

Stampa 2.1: The Cecotec Conga Rockstar RX70 AquaPet Flex cordless stick vacuum cleaner shown with its main body, extension tube, motorized brush, and various included accessories.

Stampa 2.2: A selection of accessories including the wall mount, upholstery brush, narrow nozzle, flexible hose, and pet grooming tool, designed for versatile cleaning.

Komponenti ewlenin:

• Motor Unit with Digital Display
• Batterija li tista 'titneħħa
• Extension Tube (with Flex joint)
• Motorizzat HairLess XL Brush with LED light
• ErgoWet Mopping Accessory

Aċċessorji inklużi:

• Mount Wall
• Għodda tal-Xquq
• Pinzell tat-Tapizzerija
• Manka Flessibbli
• Pinzell għall-grooming tal-annimali domestiċi
• Ċarġer tal

3. Setup u Assemblea

3.1 Iċċarġjar inizjali

1. Before first use, fully charge the battery. Connect the charger to the battery or the vacuum cleaner directly.
2. The digital display will show charging progress. A full charge typically takes several hours.

3.2 L-Immuntar tal-Vacuum Cleaner

1. Insert the extension tube into the motor unit until it clicks securely.
2. Attach the motorized brush head to the other end of the extension tube, ensuring it clicks into place.

Stampa 3.1: The main vacuum unit fully assembled, showing the motor, extension tube, and motorized brush head.

3.3 Aċċessorji twaħħil

The vacuum can be used in handheld mode by attaching accessories directly to the motor unit, or with the extension tube for extended reach.

Stampa 3.2: The handheld motor unit configured with different attachments for specialized cleaning tasks, such as a crevice tool or upholstery brush.

• To attach an accessory, align it with the opening on the motor unit or extension tube and push until it locks.
• To remove, press the release button (if present) and pull the accessory off.

4. Istruzzjonijiet Operattivi

4.1 Powering On and Selecting Modes

1. Press the power button on the motor unit to turn the vacuum on.
2. Use the mode selection button to cycle through the available power modes: Eko, Medju, Għoli, u Auto. The digital display will show the selected mode and remaining battery percentage.
3. In Auto mode, the vacuum automatically adjusts suction power based on the detected dirt level, optimizing battery life.

Stampa 4.1: A close-up of the vacuum's handle and digital display, indicating battery level and current operating mode.

4.2 Vacuuming

Il- HairLess XL motorized brush is designed for effective cleaning on various floor types, including carpets and hard floors, and prevents hair tangles.

Stampa 4.2: A dettaljata view tal- HairLess XL brush, highlighting its V-shaped design and integrated teeth for efficient hair collection and prevention of tangles.

• The integrated LED light on the brush head illuminates dark areas, making hidden dirt visible.
• Il- Flex Tube allows you to bend the extension tube to reach under furniture without bending down.

Stampa 4.3: A user demonstrating the flexibility of the vacuum's tube, allowing easy access to low areas under furniture.

4.3 Using the ErgoWet Mopping System

Il- ErgoWet system allows for simultaneous vacuuming and mopping.

1. Fill the water tank of the ErgoWet accessory with clean water. You may add a small amount of neutral floor cleaner if desired.
2. Attach the mop pad securely to the accessory.
3. Waħħal il- ErgoWet accessory to the motorized brush head.
4. Proceed with vacuuming as usual. The system will simultaneously mop the floor.

Stampa 4.4: The vacuum cleaner equipped with the ErgoWet mopping accessory, ready for combined vacuuming and wet cleaning.

4.4 Using Pet Grooming Brush

The specialized pet grooming brush can be attached directly to the motor unit for grooming pets and collecting loose hair.

Stampa 4.5: A woman using the pet grooming brush attachment to gently remove loose hair from a dog, with the vacuum collecting the hair.

5. Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-vacuum cleaner tiegħek.

5.1 Tbattil tat-Tank tat-Trab

1. Kun żgur li l-vacuum cleaner ikun mitfi u skonnettjat mill-ċarġer.
2. Locate the dust tank release button and press it to detach the tank from the motor unit.
3. Open the bottom lid of the dust tank and empty its contents into a waste bin.
4. Close the lid and reattach the dust tank to the motor unit until it clicks.

5.2 Tindif tal-Filtri

The vacuum uses a HEPA filter system. Clean filters regularly to maintain suction power.

1. Remove the dust tank. The filters are located inside.
2. Carefully remove the pre-filter and HEPA filter.
3. Tap the filters gently to remove dust. For thorough cleaning, rinse them under running water.
4. Allow filters to air dry completely for at least 24 hours before reinserting them. Do not use a dryer or direct heat.

5.3 Cleaning the HairLess XL Brush

1. Itfi l-vacuum cleaner u aqla’ r-ras tal-pinzell motorizzata.
2. Sib il-mekkaniżmu tar-rilaxx tar-romblu tal-pinzell (ġeneralment lukkett jew kamin) u neħħi r-romblu tal-pinzell.
3. Remove any tangled hair or debris from the brush roll. The V-shaped design and integrated teeth minimize tangles, but occasional cleaning is still recommended.
4. Reinsert the brush roll and secure it.

5.4 ErgoWet Mopping Accessory Maintenance

1. Wara kull użu, vojta kull ilma li jkun fadal mit-tank.
2. Remove and wash the mop pad. It can typically be hand-washed or machine-washed.
3. Allow all components to air dry before storing.

6 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil-vacuum cleaner tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin.

7. Speċifikazzjonijiet

Key technical specifications for the Cecotec Conga Rockstar RX70 AquaPet Flex.

• Ditta: Cecotec
• Isem tal-Mudell: Conga Rockstar RX70 AquaPet Flex
• Numru tal-Mudell: A01_EU01_115939
• Qawwa: 780 W
• Qawwa tal-ġbid: 300 AW (Air Watts)
• Pressjoni tal-ġbid: 30 kPa
• Batterija: 33.6 V Max, 4000 mAh Pulsar Battery
• Runtime (Eco Mode): Up to 100 minutes (handheld), up to 70 minutes (motorized brush)
• Tip ta' filtru: Filtru HEPA
• Karatteristiċi Speċjali: Cordless, Flex Tube, LED Light, ErgoWet Mopping System, HairLess XL Brush
• Fattur tal-Formola: Waħħal, jinżamm fl-idejn
• Dimensjonijiet tal-Prodott: 26 ċm (L) x 12.5 ċm (W) x 37 ċm (H)
• Dimensjonijiet tal-pakkett: 69.5 x 34.5 x 18.5 ċm
• Piż: 2.08 kg

8. Garanzija u Appoġġ

Your Cecotec Conga Rockstar RX70 AquaPet Flex comes with a manufacturer's warranty. Please refer to the warranty card included in the packaging for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact Cecotec customer support through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fid-dokumentazzjoni tal-prodott tiegħek.

Always provide your model number (A01_EU01_115939) and purchase date when contacting support.