Introduzzjoni
This manual provides essential information for the proper installation, operation, and maintenance of your Jensen JW124 12-inch subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Informazzjoni dwar is-Sigurtà
- Dejjem skonnettja l-batterija tal-vettura qabel ma tagħmel xi xogħol elettriku.
- Kun żgur li l-wajers kollha huma iżolati sew biex tevita short circuits.
- Immonta s-subwoofer sew biex tevita li jiċċaqlaq waqt it-tħaddim tal-vettura.
- Evita li tesponi s-subwoofer għal umdità eċċessiva jew temperaturi estremi.
- Ikkonsulta installatur professjonali tal-awdjo tal-karozzi jekk m'intix ċert dwar xi passi tal-installazzjoni.
Kontenut tal-Pakkett
- Jensen JW124 12-inch Subwoofer
- Manwal tas-Sid (dan id-dokument)
Karatteristiċi Ewlenin
- 12-Inch High Performance Subwoofer: Designed for deep and profound bass reproduction.
- Double Stitched Extra Wide Surround: Enhances heat resistance, internal damping, bass response, and reliability.
- Low Resonance Basket Design: Minimizes vibrations for consistent and accurate bass.
- Steel Stamped Reinforced Structure: Provides strength and flexibility for linearity and greater movement.
- Flessibilità tal-Immuntar: Compatible with sealed, ported, or bandpass enclosures.
- Digitally Optimized: Engineered for efficient, low-sounding bass while generating 1600 Watts Peak Power (400 Watts RMS) at 4 Ohms.
Setup u Installazzjoni
Proper installation is crucial for optimal performance. Consider professional installation if you are unfamiliar with car audio wiring and enclosure construction.
Tipi ta' Mehmużin
The JW124 subwoofer is versatile and can be installed in various enclosure types:
- Kompartimenti Issiġillati: Provide tight, accurate bass response, ideal for musicality.
- Kompartimenti portati: Offer louder, more extended bass, suitable for higher output.
- Bandpass Enclosures: Deliver very high output within a narrow frequency range.
Consult your enclosure manufacturer's recommendations or car audio resources for specific enclosure volume and port tuning guidelines.
Wiring
The JW124 features a 4 Ohm impedance. Ensure your amplifier is stable at 4 Ohms or the impedance resulting from multiple subwoofers wired in series or parallel. Always use appropriate gauge wiring for power, ground, and speaker connections to prevent power loss and ensure safety.
Immaġni: Quddiem view of the Jensen JW124 12-inch subwoofer, showcasing its black woofer cone and blue foam surround.
Immaġni: Wara view of the Jensen JW124 subwoofer, displaying the magnet assembly, model number, impedance (4 Ohm), and power rating (1600 Watts Peak).
Istruzzjonijiet Operattivi
Once installed, connect the subwoofer to a suitable amplifer. Aġġusta l- amplifier's gain, crossover, and phase settings according to your system's requirements and personal preference. Start with low gain settings and gradually increase to avoid distortion and potential damage to the subwoofer or ampaktar ħaj.
- L-issettjar tal-gwadann: Qabbel mal- ampis-sensittività tad-dħul tal-lifer għall-volum tal-ħruġtage of your head unit.
- Filtru Low-Pass (LPF): Issettja l-LPF fuq tiegħek amplifier or head unit to filter out frequencies above the subwoofer's optimal range (typically 80-120 Hz).
- Kontroll tal-Fażi: Adjust the phase (0° or 180°) to ensure the subwoofer's output is in sync with your main speakers, preventing cancellation.
Manutenzjoni
- Keep the subwoofer cone free from dust and debris. Use a soft, dry cloth for cleaning.
- Iċċekkja perjodikament il-konnessjonijiet tal-wajers kollha għal issikkar u korrużjoni.
- Avoid exposing the subwoofer to direct sunlight for extended periods, as this can degrade materials.
- Do not apply excessive power beyond the subwoofer's rated limits to prevent damage.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda Ħoss | Ebda setgħa li ampwajers maħlula; amplifier in protect mode; incorrect input signal. | Check power and ground connections; verify remote turn-on wire; inspect speaker wires; check amplifier fuses; ensure head unit is sending signal. |
| Ħoss Mgħawġ | Gain set too high; incorrect crossover settings; damaged subwoofer. | Naqqas amplifier gain; adjust LPF; inspect subwoofer for physical damage. |
| Bass Dgħajjef | Incorrect phase setting; insufficient power; improper enclosure. | Adjust phase control; ensure adequate power supply to amplifier; verify enclosure volume and type. |
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | JW124 12" Subwoofer |
| Tip ta' Kelliem | Subwoofer |
| Daqs tal-Kelliem | 12 Pulzier |
| Ogħla tal-Qawwa tal-Qawwa | 1600 Watts |
| Ħruġ ta 'Qawwa RMS | 400 Watts |
| Impedenza | 4 Ohms |
| Teknoloġija tal-Konnettività | Bil-fili |
| Tip ta 'Immuntar | Egħluq |
| Materjal (Kon) | Polipropilene |
| Kulur | Iswed u Blu |
| Dimensjonijiet tal-Prodott | 1"D x 1"W x 1"H |
| Piż tal-oġġett | 10 Liri |
| UPC | 827204122051 |
Note: The listed product dimensions (1"D x 1"W x 1"H) appear to be placeholders and may not reflect the actual physical size of a 12-inch subwoofer. Product specifications are subject to change without notice.
Garanzija u Appoġġ
The Jensen JW124 subwoofer comes with a Garanzija standard ta '3 sninEstiża garanzija ta 'sena is available upon online registration at jensenmobile.com.
For technical support, service, or warranty inquiries, please visit the official Jensen websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.
