EUHOMY Nugget Ice Maker IM017-NBL User Manual

Istruzzjonijiet Importanti dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel ma tuża dan l-apparat biex tiżgura tħaddim sikur u prestazzjoni ottimali. Żomm dan il-manwal għal referenza futura.

• Kun żgur li l-apparat huwa konness ma' sokit tal-enerġija ertjat bil-vultaġġ korretttage (115 Volts).
• Tgħaddasx il-korda tal-enerġija, il-plagg, jew kwalunkwe parti tal-apparat fl-ilma jew f'likwidi oħra.
• Issorvelja lit-tfal meta l-apparat ikun qed jintuża. Dan l-apparat mhuwiex maħsub għall-użu minn persuni b'kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa sakemm ma jkunux sorveljati.
• Unplug the ice maker before cleaning, servicing, or when not in use for extended periods.
• Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara, jew wara li l-apparat ma jaħdimx jew ikun ġie bil-ħsara b'xi mod.
• Place the ice maker on a stable, level surface, away from direct sunlight, heat sources, and corrosive gases.
• Ensure adequate ventilation around the appliance. Maintain at least 5 inches of space around the sides and back.
• Uża biss ilma tajjeb għax-xorb fir-riżervwar tal-ilma.
• Taħżinx sustanzi splussivi bħal bottijiet aerosol bi propellant li jaqbad f'dan l-apparat.

Prodott Overview

The EUHOMY Nugget Ice Maker IM017-NBL is a countertop appliance designed to produce chewable nugget ice efficiently. It features a self-cleaning function and intuitive controls for ease of use.

Komponenti Inklużi

• Magni li Jagħmlu s-Silġ
• Scoop tas-Silġ
• Manwal ta' Istruzzjoni

Deskrizzjoni tal-Immaġni: This image displays the EUHOMY Nugget Ice Maker with its dimensions (13.8"D x 9.8"W x 14.9"H) and highlights the included accessories: a 2-pound capacity ice basket, an ice scoop, and a 1.8-liter water tank.

Deskrizzjoni tal-Immaġni: Angolu ta' quddiem view of the EUHOMY Nugget Ice Maker. The ice collection bin is pulled out, revealing a generous amount of fresh nugget ice. The control panel with 'LIGHT', 'CLEAN', and 'ICE' buttons is visible at the top.

Setup

1. Spakkjar

Carefully remove all packaging materials, including any protective film or tape. Inspect the ice maker for any signs of damage during transit. If any damage is found, do not operate the appliance and contact customer support.

2 Tqegħid

Place the ice maker on a flat, stable, and heat-resistant surface. Ensure there is at least 5 inches (12.7 cm) of clear space around the back and sides for proper ventilation. Avoid placing the unit near heat sources or in direct sunlight.

3. Tindif Inizjali

Before first use, it is recommended to clean the ice maker. Refer to the 'Maintenance' section for detailed cleaning instructions, particularly the self-cleaning function.

4. Tħejjija għall-Ewwel Użu

After cleaning, ensure the drain plug is securely closed. Fill the water reservoir with potable water up to the 'MAX' fill line. Do not overfill. Allow the unit to sit for at least one hour before plugging it in to allow refrigerants to settle.

Deskrizzjoni tal-Immaġni: This image shows a hand pulling out the transparent water tank from the side of the ice maker, positioned under a kitchen faucet, illustrating the easy refill process.

Istruzzjonijiet Operattivi

1. Żieda tal-Ilma

Open the water tank cover and fill the reservoir with clean, potable water. Ensure the water level does not exceed the 'MAX' indicator. Close the cover securely.

2. Nagħmlu s-Silġ

Ipplaggja l-magna tas-silġ f'bokk elettriku ertjat. Agħfas il-buttuna SILĠ button on the control panel. The 'Making Ice' indicator light will illuminate, and the unit will begin the ice-making cycle. The first batch of ice typically takes 7-10 minutes.

Deskrizzjoni tal-Immaġni: A close-up view of the ice maker's control panel, showing a finger pressing the 'ICE' button to initiate the ice production cycle.

3. Understanding Indicator Lights

• Nagħmlu s-Silġ: Indicates the unit is actively producing ice.
• Low Water / Add Water: Illuminates when the water reservoir needs refilling. The ice maker will pause operation until water is added.

Deskrizzjoni tal-Immaġni: A visual representation of the 'Add Water' indicator light on the ice maker's display, signaling that the water reservoir requires refilling.
• Silġ sħiħ: Illuminates when the ice basket is full. The ice maker will automatically stop producing ice until some ice is removed.


Deskrizzjoni tal-Immaġni: A visual representation of the 'Ice Full' indicator light on the ice maker's display, indicating that the ice storage bin is at capacity.

• Tindif: Indicates the unit is performing a self-cleaning cycle.

4. L-Użu tal-Funzjoni tad-Dawl

Agħfas il- DAWL button to turn the internal illumination on or off, allowing you to monitor the ice-making process or simply illuminate the ice bin.

Manutenzjoni

It-tindif u l-manutenzjoni regolari huma kruċjali għall-lonġevità u t-tħaddim iġjeniku tal-magna tas-silġ tiegħek.

1. Funzjoni ta 'Awto-Tindif

The ice maker is equipped with an automatic self-cleaning system. To activate:

1. Kun żgur li r-riżervwar tal-ilma jimtela b'ilma nadif.
2. Agħfas il- NADIF buttuna fuq il-pannell tal-kontroll.
3. The unit will perform a 20-minute cleaning cycle. The 'Cleaning' indicator light will be on.
4. Once the cycle is complete, drain the water from the unit as described below.

Deskrizzjoni tal-Immaġni: An X-ray style illustration of the ice maker's internal components, depicting water actively circulating and splashing during the automatic self-cleaning process.

2. Regular Manual Cleaning

For thorough cleaning, especially if using hard water, perform manual cleaning:

1. Skonnettja l-magna tas-silġ mill-plagg tal-elettriku.
2. Neħħi l-basket tas-silġ u naddfu b'deterġent ħafif u ilma sħun. Laħlaħ sew.
3. Drain all water from the reservoir (see 'Draining Water' below).
4. Imsaħ l-intern tar-riżervwar tal-ilma u l-komponenti li jagħmlu s-silġ b'ċarruta ratbaampened with a solution of water and a small amount of vinegar or a food-grade cleaning agent.
5. Rinse the interior thoroughly with clean water to remove any cleaning solution residue.
6. Imsaħ il-barra tal-unità b'artab, damp drapp.
7. Kun żgur li l-partijiet kollha huma niexfa qabel ma terġa' tiġbor u tħaddem l-unità.

3. Tbattil tal-Ilma

Biex tbattal l-ilma mill-unità:

1. Place the ice maker near a sink or prepare a container to collect the water.
2. Sib it-tapp tad-drenaġġ fil-qiegħ tal-unità.
3. Carefully remove the drain plug to allow water to flow out.
4. Once all water has drained, securely reinsert the drain plug.

Issolvi l-problemi

If you encounter issues with your ice maker, please consult the following table before contacting customer support.

Speċifikazzjonijiet

Garanzija u Appoġġ

EUHOMY products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official EUHOMY websit.

If you require technical assistance, troubleshooting beyond this manual, or have questions about your product, please contact EUHOMY customer support. Contact details can typically be found on the manufacturer's webis-sit jew fuq l-imballaġġ tal-prodott.

When contacting support, please have your model number (IM017-NBL) and purchase information readily available.