DONOW DN-08

Manku tad-Dip DONOW għal Magni Smith DN-DS938N, DN-DS938B, DN-DS938T - Manwal ta' Istruzzjoni

Mudell: DN-08

Introduzzjoni

This instruction manual provides essential information for the safe and effective use of your DONOW Dip Handle, specifically designed for compatibility with DN-DS938N, DN-DS938B, and DN-DS938T Smith Machines. Please read this manual thoroughly before installation and operation to ensure proper function and user safety.

Prodott Overview

The DONOW Dip Handle (Model DN-08) is an accessory crafted from durable alloy steel, designed to integrate seamlessly with specific DONOW Smith Machine models. It provides a stable and secure platform for performing dip exercises, enhancing the versatility of your existing fitness equipment.

DONOW Dip Handle

Figura 1: DONOW Dip Handle.

DONOW Dip Handle Dimensions

Figura 2: Key dimensions of the DONOW Dip Handle, showing a pin diameter of 0.55 inches and a handle length of 2.42 inches.

Kompatibilità

This Dip Handle is exclusively compatible with the following DONOW Smith Machine models:

Ensure your Smith Machine model matches one of the listed compatible models before attempting installation.

Setup u Installazzjoni

The Dip Handle is designed for straightforward installation onto compatible DONOW Smith Machines.

  1. Ħoll il-Komponenti: Carefully remove all parts from the packaging and verify that all components are present and undamaged.
  2. Identifika l-Punti tal-Immuntar: Locate the designated mounting points on your Smith Machine's uprights. These are typically pre-drilled holes designed to accommodate accessories.
  3. Insert Dip Handle: Align the Dip Handle's attachment pins with the desired height holes on the Smith Machine uprights.
  4. Sikur fil-post: Push the Dip Handle firmly into the holes until it is fully seated and stable. Ensure any locking mechanisms (if present on your Smith Machine) are engaged.
  5. Stabbiltà tat-Test: Before use, gently apply pressure to the Dip Handle to confirm it is securely attached and does not wobble.

For a visual guide on Smith Machine assembly, which includes similar attachment processes, please refer to the video below.

Vidjo 1: General assembly process for a DONOW Smith Machine, demonstrating how accessories are attached.

Istruzzjonijiet Operattivi

Once the Dip Handle is securely installed, it can be used for various exercises.

  1. Dips: Stand between the handles, grip them firmly, and lift your feet off the ground. Lower your body by bending your elbows until your shoulders are below your elbows, then push back up to the starting position.
  2. Tgħollija tas-Saqajn: Face away from the handles, grip them, and hang with your legs extended. Raise your legs towards your chest, keeping them straight or slightly bent, then slowly lower them.
  3. Assisted Exercises: The Dip Handle can also be used for assisted exercises with resistance bands or other aids, depending on your fitness level.

Always ensure proper form and control during exercises. Consult a fitness professional for guidance on exercise techniques.

Vidjo 2: Demonstrations of various exercises possible with a Smith Machine, including potential uses for dip handles.

Manutenzjoni

Issolvi l-problemi

Speċifikazzjonijiet

KaratteristikaDettall
BrandDONOW
Isem tal-MudellDN-08
MaterjalAzzar Liga
KulurIswed
Utenti SuġġeritiUnisex-adult
ManifatturDOMINO KUMMERĊ INTERNAZZJONALI INC

Garanzija

This DONOW Dip Handle comes with a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please contact DONOW customer support.

Appoġġ

For further assistance, technical support, or to inquire about replacement parts, please visit the official DONOW websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Manifattur: DOMINO KUMMERĊ INTERNAZZJONALI INC

Ħanut tal-Marka: Visit the DONOW Store on Amazon

Dokumenti Relatati - DN-08

Preview Manwal tal-Assemblaġġ DONOW Squat Rider DN-6334B
Manwal komprensiv tal-assemblaġġ għall-magna tal-fitness DONOW Squat Rider DN-6334B, dettalji tal-partijiet u struzzjonijiet pass pass.
Preview Sistemi ta' Reġistrazzjoni tal-Vidjo Diġitali KODICOM: Manwal tal-Installatur u tal-Utent
Manwal komprensiv għas-Sistemi ta' Reġistrazzjoni tal-Vidjo Diġitali KODICOM, li jkopri l-installazzjoni, is-setup, it-tħaddim, u s-soluzzjoni tal-problemi. Jinkludi gwidi dettaljati dwar il-modi ta' sorveljanza, il-funzjonijiet ta' tiftix, il-proċeduri ta' backup, u l-konfigurazzjoni tas-sistema għal diversi mudelli ta' DVR KODICOM.
Preview Gwida għall-Installazzjoni tad-DIGITUS Shielded Patch Panel
Gwida komprensiva għall-installazzjoni għal patch panels protetti ta' DIGITUS, li tkopri t-tneħħija tat-tensjoni, it-twaħħil tal-kejbil, u l-proċeduri ta' konnessjoni. Tinkludi speċifikazzjonijiet tal-prodott u informazzjoni dwar il-konformità mar-RoHS.
Preview Valv tat-Taħlit ESBE Serje 3F - Dejta Teknika, Speċifikazzjonijiet, u Tħaddim
Informazzjoni dettaljata dwar il-valv tat-taħlit ESBE Series 3F, inklużi speċifikazzjonijiet tekniċi, dimensjonijiet, tħaddim, manutenzjoni, installazzjoni examples, u gwidi tad-dimensjonar għal sistemi ta' tisħin. Adattat għal applikazzjonijiet ta' tisħin u tkessiħ.
Preview Skeda tad-Data tal-Valvijiet tal-Kontroll Indipendenti mill-Pressjoni (PICV) Danfoss AB-QM 4.0 / AB-QM DN 15-250
Din il-folja tad-dejta tipprovdi informazzjoni komprensiva dwar il-Valvijiet ta' Kontroll Indipendenti mill-Pressjoni (PICV) Danfoss AB-QM 4.0 u AB-QM għal daqsijiet DN 15 sa DN 250. Tkopri prodott fuqview, speċifikazzjonijiet tekniċi, informazzjoni dwar l-ordnijiet, kompatibilità tal-attwatur, disinn, funzjoni, metodi ta' kejl, informazzjoni dwar is-servizz, u dimensjonijiet.
Preview Engelmann FlowStar U: Skeda tad-Data tal-Miter tal-Fluss Ultrasoniku
Speċifikazzjonijiet tekniċi dettaljati u aktarview tal-miter tal-fluss ultrasoniku Engelmann FlowStar U, li jinkludi kejl preċiż, kostruzzjoni ta' kwalità għolja, u diversi daqsijiet u klassifikazzjonijiet tal-pressjoni.