1. Introduzzjoni
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your KATOOL Portable Mid-Rise Scissor Lift, Model AK-X66. Designed for automotive shops, home garages, and industrial use, this lift offers a robust 6000 LBS lifting capacity and a maximum lifting height of 48 inches. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.
2. Informazzjoni dwar is-Sigurtà
TWISSIJA: Nuqqas li ssegwi dawn l-istruzzjonijiet ta’ sigurtà jista’ jirriżulta fi korriment serju jew mewt.
- Always read and understand the entire manual before operating the lift.
- Ensure the lift is placed on a level, solid, and non-slip surface capable of supporting the lift's weight plus the maximum rated load.
- Do not exceed the maximum lifting capacity of 6000 LBS (2721 kg).
- Ensure the vehicle is properly centered and stable on the lift pads before raising. Use appropriate vehicle lifting points.
- Never work under a lift that is not properly secured by its mechanical safety locks.
- Keep hands, feet, and clothing clear of moving parts.
- Do not operate the lift if any part is damaged or malfunctioning. Contact KATOOL support for replacement parts.
- Persunal imħarreġ u awtorizzat biss għandu jħaddem dan it-tagħmir.
- Wear appropriate personal protective equipment (PPE), including safety glasses and steel-toed boots.
- Skonnettja l-enerġija qabel ma twettaq kwalunkwe manutenzjoni jew tiswija.
- Żomm iż-żona tax-xogħol nadifa u mdawwal sew.
3. Kontenut tal-Pakkett
Meta tiftaħ il-pakkett, ivverifika li l-komponenti kollha huma preżenti u mhux imħassra. Jekk xi oġġetti huma neqsin jew imħassra, ikkuntattja lill-fornitur tiegħek immedjatament.
- KATOOL Portable Mid-Rise Scissor Lift (AK-X66)
- Unità tal-Enerġija Idrawlika
- Lift Pads and Extensions
- Hydraulic Hoses and Fittings
- Manwal tat-Tħaddim (dan id-dokument)
- Ħardwer tal-Assemblea
4. Speċifikazzjonijiet
| Speċifikazzjoni | Valur |
|---|---|
| Mudell | AK-X66 |
| Brand | KATOOL |
| Kapaċità tat-Tagħbija | 6000 LBS (2721 kg) |
| Max. Għoli ta 'rfigħ | 48 pulzieri (121.9 ċm) |
| Kulur | Aħmar |
| Tip ta 'Waħħal tal-Karozzi | Waħħal Universali |
| UPC | 618716725171 |
5. Setup u Installazzjoni
Proper setup is crucial for the safe and effective operation of your scissor lift. Follow these steps carefully.
5.1 Preparazzjoni tas-Sit
- Choose a level, concrete floor with sufficient strength to support the lift and maximum load.
- Ensure adequate overhead clearance for the maximum lifting height of 48 inches plus the height of the vehicle.
- Provide sufficient clear space around the lift for safe operation and movement.
5.2 Assemblea
- Iftaħ il-komponenti kollha mill-pakkett u vverifika mal-lista tal-kontenut tal-pakkett.
- Position the main lift frame in the desired location.
- Connect the hydraulic hoses from the lift to the hydraulic power unit. Ensure all connections are tight and free of leaks.
- Fill the hydraulic power unit reservoir with appropriate hydraulic fluid (not included). Consult the power unit manual for fluid type and capacity.
- Connect the power unit to a suitable electrical supply as per its specifications.
- Install the adjustable lift pads onto the lift arms. These pads can be adjusted to fit various vehicle frame points.
6. Istruzzjonijiet Operattivi
Follow these steps for safe and effective operation of your KATOOL Scissor Lift.
6.1 Lista ta' Kontroll ta' Qabel l-Operazzjoni
- Ensure the lift is on a level surface.
- Check hydraulic fluid level.
- Inspect hydraulic hoses and connections for leaks or damage.
- Verify all safety locks are functioning correctly.
- Clear the area around the lift of any obstructions.
6.2 Lifting a Vehicle
- Carefully drive the vehicle onto the lift, ensuring it is centered and positioned correctly over the lift pads.
- Adjust the lift pads to contact the vehicle's designated lifting points. Ensure stable contact.
- Activate the "UP" button on the hydraulic power unit. The lift will begin to raise.
- Raise the vehicle slowly, observing its stability. If any instability is noted, lower the vehicle immediately and re-position.
- Once the desired height is reached, engage the mechanical safety locks. The lift is equipped with multiple locking positions.
- Slightly lower the lift onto the safety locks by pressing the "DOWN" button briefly until the weight rests on the locks. This ensures the vehicle is securely supported.
- Before working under the vehicle, gently shake the vehicle to confirm it is stable on the lift.
6.3 Lowering a Vehicle
- Ensure the area beneath and around the vehicle is clear of personnel and obstructions.
- Slightly raise the lift off the safety locks by pressing the "UP" button for a short duration.
- Disengage the mechanical safety locks. Refer to the specific mechanism on your lift for proper disengagement.
- Press the "DOWN" button on the hydraulic power unit. The lift will slowly descend.
- Once the lift is fully lowered, carefully drive the vehicle off the lift.
7. Manutenzjoni
Regular maintenance ensures the longevity and safe operation of your KATOOL Scissor Lift.
7.1 Verifiki ta' Kuljum
- Inspect for any visible damage, leaks, or loose connections.
- Iċċekkja l-livell tal-fluwidu idrawliku.
- Ensure safety locks engage and disengage smoothly.
7.2 Verifiki ta' Kull Xahar
- Lubricate all pivot points and moving parts with appropriate grease.
- Iċċekkja l-boltijiet u l-qafliet kollha għal issikkar.
- Inspect hydraulic hoses for wear, cracks, or bulges.
7.3 Manutenzjoni Annwali
- Replace hydraulic fluid.
- Inspect all structural components for signs of fatigue or corrosion.
- Have a qualified technician perform a thorough inspection and service.
8 Issolvi l-problemi
This section provides solutions to common issues you might encounter with your scissor lift.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lift does not raise | No power to hydraulic unit; Low hydraulic fluid; Air in hydraulic system; Malfunctioning pump. | Check power connection and circuit breaker; Fill hydraulic fluid to proper level; Bleed air from system; Contact KATOOL support. |
| Lift lowers slowly or erratically | Air in hydraulic system; Leaking hydraulic hose/fitting; Worn seals in cylinders. | Bleed air from system; Inspect and tighten/replace leaking components; Contact KATOOL support for seal replacement. |
| Safety locks not engaging | Obstruction; Damaged mechanism; Misalignment. | Clear obstruction; Inspect mechanism for damage; Ensure lift is level; Contact KATOOL support. |
9. Garanzija u Appoġġ
KATOOL stands behind the quality of its products. For warranty information, technical support, or to order replacement parts, please contact KATOOL customer service. Keep your purchase receipt and product model number (AK-X66) handy when contacting support.
For the most up-to-date warranty details and contact information, please visit the official KATOOL website or refer to the documentation provided at the time of purchase.
