1. Introduzzjoni
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ergosolid G70 Gas Spring Articulated Monitor Arm. Please read this manual thoroughly before installation and retain it for future reference.
2. Informazzjoni dwar is-Sigurtà
Jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin waqt l-installazzjoni u l-użu:
- Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-installazzjoni. Tużax jekk xi partijiet huma neqsin jew difettużi.
- This product contains a high-pressure gas spring. Do not attempt to disassemble the gas spring unit.
- Do not exceed the maximum weight capacity of 12 kg (26.4 lbs) or the specified monitor size range of 22-35 inches.
- Install the monitor arm on a sturdy desk surface capable of supporting the combined weight of the arm and your monitor.
- Issikka l-viti kollha sew, imma tissikkax iżżejjed biex tevita li l-ħjut jitqaxxru jew li tagħmel ħsara lill-komponenti.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha li ġejjin huma inklużi fil-pakkett tiegħek:
- Assemblea tad-Driegħ tal-Monitor
- Desk Clamp Bażi
- Bażi tal-Immuntar tal-Grommet
- Pjanċa VESA
- Kit tal-Ħardwer (viti, woxers, spacers)
- Hex Keys for adjustment
- Manwal ta' Istruzzjoni
4. Kompatibilità
The Ergosolid G70 monitor arm is designed for optimal performance with the following specifications:
- Daqs tal-Monitor: 22 sa 35 pulzieri (56 sa 89 ċm)
- Piż tal-monitor: 2 sa 12 kg (4.4 sa 26.4 lbs)
- Kompatibbiltà VESA: 75x75 mm and 100x100 mm
5. Installazzjoni
The monitor arm offers two installation methods: desk clamp and grommet mount.
5.1. Choose Your Mounting Method
5.1.1. Desk Clamp Installazzjoni
- Waħħal l-iskrivanija clamp base to the edge of your desk.
- Issikka l-clamp screw until the base is securely fastened to the desk.
- Insert the main pole of the monitor arm into the clamp bażi.
5.1.2. Grommet Mount Installation
- If your desk has a grommet hole, insert the grommet mount base through the hole.
- Secure the base from underneath the desk using the provided plate and nut.
- Insert the main pole of the monitor arm into the grommet base.
5.2. Twaħħil tal-Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the VESA plate is oriented correctly (usually with an "UP" indicator).
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
- Secure the monitor to the arm by tightening the locking screw on the VESA head.
5.3. Ġestjoni tal-Kejbil
The monitor arm features an integrated cable management system. Route your monitor's power and video cables through the designated channels along the arm to maintain a tidy workspace.
6. Adjustments and Operation
The Ergosolid G70 monitor arm offers a range of adjustments for optimal ergonomic positioning.
6.1. Aġġustament tat-Tensjoni tal-Mola tal-Gass
The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.
6.2. Aġġustament tal-Għoli
Once the gas spring tension is correctly set, you can effortlessly raise or lower your monitor by gently pushing or pulling the monitor to the desired height. The arm allows for a height adjustment range of up to 530 mm.
6.3. Aġġustament tal-Mejjel
The monitor can be tilted from +85° (upwards) to -30° (downwards) to reduce glare and optimize viewing angles. Simply grasp the monitor and tilt it to your preferred angle.
6.4. Aġġustament tad-dawrien
The arm allows for a 90° lateral rotation (swivel) to the left and right, enabling you to share your screen or adjust your viewing position easily.
6.5. Rotation (Pivot)
The monitor can be rotated 360° from landscape to portrait orientation without removing it from the arm.
6.6. Retraction/Extension
The articulated arm allows for extension and retraction, providing a maximum reach of 650 mm to position your monitor at the ideal distance from your eyes.
7. Manutenzjoni
To ensure the longevity and optimal performance of your Ergosolid G70 monitor arm, follow these maintenance guidelines:
- Tindif: Wipe the arm surfaces with a soft, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Kontrolli perjodiċi: Iċċekkja l-viti u l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati. Issikka mill-ġdid jekk meħtieġ, imma tissikkax iżżejjed.
- Rebbiegħa tal-Gass: Il-molla tal-gass ma teħtieġx manutenzjoni. Tippruvax tillubrikha jew tiżżarmaha.
8 Issolvi l-problemi
If you encounter any issues with your monitor arm, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Monitor drifts down or up | Gas spring tension is incorrect for monitor weight. | Adjust the gas spring tension using the hex key. Increase tension for heavier monitors (clockwise), decrease for lighter monitors (counter-clockwise). |
| Monitor is wobbly or unstable | Mounting screws are loose or desk is unstable. | Ensure all mounting screws (clamp/grommet and VESA plate) are securely tightened. Verify desk stability. |
| Difficulty moving the arm | Gas spring tension is too high or joints are too tight. | Decrease gas spring tension. Check and slightly loosen any joint screws if movement is excessively stiff. |
| Monitor cannot be rotated (pivot) | Rotation mechanism is too tight. | Check for any locking screws on the rotation mechanism and loosen slightly if present. |
9. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | G70 |
| Brand | Ergosolid |
| Materjal | Aluminju |
| Kulur | Grafita |
| Daqs tal-Monitor Kompatibbli | 22 - 35 pulzier (56 - 89 ċm) |
| Kapaċità tal-piż | 2 - 12 kg (4.4 - 26.4 liri) |
| Kompatibilità VESA | 75x75 mm, 100x100 mm |
| Tip ta 'Immuntar | Desk Clamp, Grommet Mount |
| Aġġustament Għoli | Sa 530 mm |
| Angolu Mejjel | +85° / -30° |
| Angolu li jdur | 90° (xellug/lemin) |
| Rotation (Pivot) | 360° |
| Estensjoni Max | 650 mm |
| Dimensjonijiet tal-Prodott | 44 x 23 x 13 ċm (ippakkjat) |
| Piż tal-Prodott | 4.91 kg |
10. Garanzija u Appoġġ
For warranty information and customer support, please refer to the official Ergosolid website or contact your retailer. The return policy for this product, if purchased through Amazon, is typically 6 days for refund/replacement, fulfilled by Amazon. Specific warranty terms are provided by the manufacturer.
You can visit the Ergosolid brand store for additional information and support: Ergosolid Brand Store
