1. Introduzzjoni
This manual provides detailed instructions for the setup, operation, and maintenance of your NOKLEAD Digital Alarm Clock Model 5252. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The NOKLEAD Digital Alarm Clock features a 5.9-inch large LED display, adjustable brightness, two volume levels for the alarm, a 9-minute snooze function, and supports both 12-hour and 24-hour time formats. It is designed for ease of use and is powered via a USB adapter.
2. Kontenut tal-Pakkett
Meta tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma preżenti u f'kundizzjoni tajba:
- 1 x NOKLEAD Digital Alarm Clock (Model 5252)
- 1 x USB-C Cable (78.7 inches / 2.0 meters)
- 1 x Adapter tal-Enerġija
- 1 x Manwal għall-Utent
Image: Contents of the NOKLEAD Digital Alarm Clock package, including the clock, USB-C cable, power adapter, and user manual.
3. Prodott Aktarview
Familiarize yourself with the main components and controls of your alarm clock.
Immaġni: Quddiem view of the NOKLEAD Digital Alarm Clock, showing the large LED display with time (10:30 AM) and alarm/snooze icons.
Immaġni: Wara view of the NOKLEAD Digital Alarm Clock, highlighting the control buttons: SNOOZE/LIGHT, Time Setting, Up, Down, Alarm Setting, Alarm ON/OFF, Reset, and Type-C Input Port.
Buttuni tal-Kontroll:
- SNOOZE/LIGHT Button (Top): Press to snooze the alarm or adjust display brightness.
- TIME SET Button (Back): Press to enter time setting mode.
- UP Button (Back): Adjusts values upwards during setting.
- DOWN Button (Back): Adjusts values downwards during setting.
- ALARM SET Button (Back): Press to enter alarm setting mode.
- ALARM ON/OFF Switch (Back): Toggles the alarm function on or off.
- RESET Button (Back): Resets the clock to factory defaults.
- Type-C Input Port (Back): Connects the USB-C power cable.
4. Istruzzjonijiet ta' Setup
4.1 Powering On the Clock
- Connect the provided USB-C cable to the Type-C Input Port on the back of the alarm clock.
- Plug the other end of the USB-C cable into the included power adapter.
- Daħħal l-adapter tal-enerġija f'sokit elettriku standard.
The clock display will illuminate, indicating it is powered on. Note that this clock is powered by USB only. In case of a power outage, the screen will go dark, and the alarm will not sound. However, time and alarm settings are automatically saved and will be restored once power is re-established.
Image: The NOKLEAD Digital Alarm Clock connected to a wall outlet via its USB cable and adapter, illustrating its power source.
5. Istruzzjonijiet Operattivi
5.1 Issettjar tal-Ħin
- Agħfas u żomm il- IL-ĦIN IPPOST button on the back of the clock. The hour digits will begin to flash.
- Uża l- UP or 'L isfel buttuni biex taġġusta s-siegħa.
- Agħfas il- IL-ĦIN IPPOST Agħfas il-buttuna mill-ġdid biex tikkonferma s-siegħa u tmur għall-issettjar tal-minuti. Iċ-ċifri tal-minuti jibdew jteptep.
- Uża l- UP or 'L isfel buttuni biex jaġġustaw il-minuti.
- Agħfas il- IL-ĦIN IPPOST button one last time to confirm the minutes and exit time setting mode.
5.2 Tibdil tal-Format ta' 12/24 Siegħa
While in normal time display mode (not setting time or alarm), press the IL-ĦIN IPPOST button briefly to toggle between 12-hour (with AM/PM indicator) and 24-hour (military time) formats.
Image: Comparison of the clock display in 12-hour format (10:30 PM) and 24-hour format (22:30).
5.3 Issettjar tal-Allarm
- Agħfas u żomm il- SET TA 'ALLARM button on the back of the clock. The alarm hour digits will begin to flash.
- Uża l- UP or 'L isfel buttuni biex taġġusta s-siegħa tal-allarm.
- Agħfas il- SET TA 'ALLARM button again to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
- Uża l- UP or 'L isfel buttuni biex taġġusta l-minuti tal-allarm.
- Agħfas il- SET TA 'ALLARM button one last time to confirm the alarm minutes and exit alarm setting mode.
- Biex tattiva l-allarm, żżerżaq il- ALLARM ON / OFF switch to the "ON" position. An alarm icon will appear on the display.
The alarm will sound for up to 30 minutes if not turned off or snoozed.
5.4 Funzjoni Snooze
Meta jdoqq l-allarm, agħfas il-buttuna l-kbira SNOOZE / DAWL button on the top of the clock. The alarm will pause for 9 minutes and then sound again. You can repeat the snooze function multiple times.
Image: A hand pressing the top SNOOZE/LIGHT button on the alarm clock, indicating the snooze function.
5.5 Aġġustament tal-Luminożità tad-Displej
Agħfas il-kbir SNOOZE / DAWL button on the top of the clock (when the alarm is not sounding) to cycle through 5 brightness levels (100%, 70%, 50%, 30%, 10%) and a full OFF option. This allows you to adjust the display to your preference for day or night viewing.
Image: Visual representation of the five adjustable brightness levels (100%, 70%, 50%, 30%, 10%) and the OFF option for the clock display.
5.6 Adjusting Alarm Volume
The alarm features two volume levels: Soft (70dB) and Loud (85dB). To switch between these levels, locate the small switch on the back of the clock, usually near the ALARM ON/OFF switch, labeled for volume adjustment. Slide it to your desired volume setting.
6. Manutenzjoni
- Tindif: Use a soft, dry cloth to wipe the clock's surface. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Pjazzament: Place the clock on a stable, flat surface. Avoid direct sunlight, extreme temperatures, or high humidity.
- Qawwa: Always use the provided power adapter and USB-C cable to ensure optimal performance and prevent damage.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-arloġġ huwa mitfi. | No power supply or power outage. | Ensure the USB-C cable and power adapter are securely connected to the clock and a working electrical outlet. Check the power outlet. |
| L-allarm ma jdoqqx. | L-allarm mhux attivat jew issettjat ħażin. | Verify the ALARM ON/OFF switch is in the "ON" position. Recheck alarm time settings (Section 5.3). Ensure the clock has power. |
| Id-displej huwa qawwi wisq jew mudlam wisq. | Brightness level needs adjustment. | Press the SNOOZE/LIGHT button on top to cycle through brightness levels (Section 5.5). |
| Cannot change time/alarm settings. | Not in setting mode or buttons are unresponsive. | Ensure you are pressing and holding the correct TIME SET or ALARM SET button. If unresponsive, try pressing the RESET button on the back with a thin object (e.g., paperclip) to restart the clock. |
8. Speċifikazzjonijiet
| Brand | NOKLEAD |
| Numru tal-Mudell | 5252 |
| Tip ta 'Wiri | LED diġitali |
| Daqs tal-Wiri | 5.9 pulzieri |
| Dimensjonijiet tal-Prodott | 5.5"W x 3"H x 1.6"D (14cm x 7.7cm x 4.1cm) |
| Sors tal-Enerġija | Elettriku bil-Fili (USB-C) |
| Alarm Volume Levels | 2 (70dB, 85dB) |
| Tul ta' Snooze | minuti 9 |
| Livelli ta 'luminożità | 5 + MITFI |
| Format tal-Ħin | 12H/24H Switchable |
| Materjal | Acrylonitrile Butadiene Styrene (ABS), Plastic, Polypropylene (PP) |
| Piż tal-oġġett | 6 uqija (170 gramma) |
9. Garanzija u Appoġġ
The NOKLEAD Digital Alarm Clock Model 5252 comes with an Extended Warranty. For specific warranty details and terms, please refer to the warranty information provided with your purchase or contact NOKLEAD customer support.
If you encounter any issues or have questions regarding your product, please contact NOKLEAD customer support through the retailer's platform or the official NOKLEAD websit għall-għajnuna.
