1. Introduzzjoni
The Cecotec Bolero Flux TLT 604000 Inox A+++ is a 60cm telescopic extractor hood designed for efficient kitchen ventilation. This appliance integrates discreetly into your kitchen cabinetry, optimizing space without compromising performance. It features a powerful DC motor, an A+++ energy rating, and a suction capacity of 415m³/h to effectively remove smoke and odors. The hood is equipped with SS Touch Control for intuitive operation, three adjustable speed levels, and bright LED lighting to illuminate your cooking area. For comprehensive air purification, it includes both 5-layer dishwasher-safe aluminum filters for grease capture and carbon filters for odor elimination.
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Cecotec Bolero Flux TLT 604000 extractor hood. Please read it thoroughly before use and retain it for future reference.
2. Istruzzjonijiet tas-Sigurtà
Biex tiżgura tħaddim sikur u tevita ħsara, jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin:
- Tiżgura l-provvista tal-enerġija voltage jaqbel mat-tikketta tal-klassifikazzjoni fuq l-apparat.
- Dan l-apparat huwa maħsub għal użu domestiku biss. Tużahx għal skopijiet kummerċjali.
- Dejjem skonnettja l-apparat mill-provvista tal-enerġija qabel it-tindif jew il-manutenzjoni.
- Do not operate the hood without filters properly installed.
- Naddaf regolarment il-filtri tal-grass biex tevita perikli tan-nar.
- Aċċerta ruħek li jkun hemm ventilazzjoni adegwata fil-kamra meta l-kappa tintuża simultanjament ma' apparati tal-gass jew apparati oħra li jaħarqu l-fjuwil.
- M'għandekx flambe taħt il-barnuża tal-firxa.
- Żomm it-tfal 'il bogħod mill-apparat waqt it-tħaddim u t-tindif.
- Jekk il-korda tal-enerġija tkun bil-ħsara, għandha tiġi sostitwita mill-manifattur, mill-aġent tas-servizz tiegħu, jew minn persuni kwalifikati bl-istess mod biex jiġi evitat periklu.
3. Prodott Aktarview
3.1 Komponenti Inklużi
Upon unpacking, verify that the following components are present:
- 1 x Cecotec Bolero Flux TLT 604000 Telescopic Extractor Hood
- 1 x Manwal tal-Utent (dan id-dokument)
- 2 x Carbon Filters (for recirculation mode, not pre-installed)
3.2 Karatteristiċi ewlenin
- Disinn Teleskopiku: Allows for discreet integration into kitchen cabinetry, extending when in use.
- Daqs Ottimali: 60 cm width, suitable for standard kitchen layouts.
- Qawwa Għolja ta' Ġbid: 415 m³/h capacity to efficiently remove cooking fumes and odors.
- Effiċjenti fl-Enerġija: DC motor with A+++ energy rating for reduced power consumption and quiet operation.
- Kontroll Intuwittiv: SS Touch Control panel for easy selection of functions.
- Veloċitajiet Varjabbli: Three adjustable speed levels to match cooking intensity.
- Illuminazzjoni LED: Integrated LED lights provide clear visibility of the cooking surface.
- Filtrazzjoni Effettiva: 5-layer dishwasher-safe aluminum filters capture grease.
- Eliminazzjoni tar-riħa: Includes carbon filters for air recirculation, neutralizing cooking odors.
Figura 1: Quddiem view of the Cecotec Bolero Flux TLT 604000 telescopic extractor hood, highlighting its sleek design and energy efficiency rating.
Figura 2: Quddiem dettaljat view of the extractor hood, showing the integrated touch controls and LED lighting.
Figura 3: Ġenb view of the extractor hood, illustrating its telescopic mechanism and compact profile.
4. Setup u Installazzjoni
The Cecotec Bolero Flux TLT 604000 is designed for easy installation into a kitchen cabinet. It can operate in either extraction mode (ducting air outside) or recirculation mode (filtering air and returning it to the kitchen).
4.1 Rekwiżiti ta' Installazzjoni
- Spazju tal-Kabinett: Ensure sufficient space within the cabinet for the hood's dimensions (refer to Figure 4 for detailed measurements).
- Provvista tal-Enerġija: A grounded electrical outlet (220 Volts) must be available within reach of the power cord.
- Ducting (Extraction Mode): If using extraction mode, a 150 mm diameter ducting outlet is required to vent air outdoors.
- Carbon Filters (Recirculation Mode): For recirculation, ensure the carbon filters are installed (see Section 6.2).
4.2 Passi ta' Installazzjoni (Linji Gwida Ġenerali)
- Ipprepara l-Kabinett: Cut out the necessary openings in the cabinet for the hood body and the ducting (if applicable), according to the provided template or dimensions.
- Mount Hood: Secure the hood to the underside of the cabinet using appropriate screws and brackets. Ensure it is level and firmly attached.
- Connect Ducting (Extraction Mode): Attach the ducting hose to the hood's outlet and route it to the exterior vent. Ensure all connections are sealed to prevent air leaks.
- Install Carbon Filters (Recirculation Mode): If using recirculation, install the carbon filters as described in the maintenance section.
- Konnessjoni Elettrika: Plug the hood into a grounded electrical outlet.
- Operazzjoni tat-Test: Turn on the hood and test all functions (speeds, lights) to ensure proper operation.
Figure 4: Technical diagram showing the dimensions of the Cecotec Bolero Flux TLT 604000 extractor hood for installation planning. All measurements are in millimeters.
Figure 5: The telescopic extractor hood seamlessly integrated into a modern kitchen setting, demonstrating its discreet design.
5. Istruzzjonijiet Operattivi
The Cecotec Bolero Flux TLT 604000 features an intuitive SS Touch Control panel for easy operation.
5.1 Funzjonijiet tal-Panew tal-Kontroll
Figure 6: Close-up of the SS Touch Control panel, showing the power, speed, and light icons.
- Buttuna tal-Qawwa (⏻): Agħfas biex tixgħel jew titfi l-kappa.
- Speed Control (☯): Press repeatedly to cycle through the three suction speeds (Low, Medium, High).
- Buttuna tad-Dawl (☀): Agħfas biex tixgħel jew titfi d-dwal LED.
Figure 7: Visual representation of the three adjustable speed levels, allowing users to select appropriate suction power for different cooking needs.
Figure 8: The extractor hood with its LED lighting activated, providing clear illumination over the cooking area.
Figure 9: Illustration of the hood's 415m³/h suction power effectively removing cooking fumes and odors from the kitchen environment.
6. Manutenzjoni
Regular maintenance ensures the longevity and optimal performance of your extractor hood. Always disconnect the appliance from the power supply before performing any maintenance.
6.1 Cleaning Aluminum Grease Filters
The hood is equipped with 5-layer aluminum grease filters designed to capture airborne grease particles. These filters should be cleaned regularly, depending on usage, typically every 2-4 weeks.
- Tneħħija: Carefully unlatch and remove the aluminum filters from the hood.
- Tindif: The filters are dishwasher-safe. Alternatively, they can be washed by hand in hot water with a mild detergent. Ensure all grease residue is removed.
- Tnixxif u Installazzjoni mill-ġdid: Allow the filters to dry completely before reinstalling them into the hood.
Figure 10: Diagram illustrating the multi-layer structure of the aluminum grease filters, designed for effective grease capture.
6.2 Installing and Replacing Carbon Filters (Recirculation Mode)
If your hood is operating in recirculation mode, carbon filters are essential for removing cooking odors. These filters are not washable and must be replaced periodically, typically every 3-6 months, depending on usage.
- Installazzjoni: Attach the carbon filters to the motor housing or filter grids as per the specific design. Ensure they are securely fastened.
- Sostituzzjoni: When replacing, remove the old carbon filters and dispose of them. Install new carbon filters following the installation steps.
Figure 11: Image of the included carbon filters, which are crucial for odor elimination in recirculation mode.
6.3 Tindif Ġenerali
Clean the exterior surfaces of the hood regularly with a soft cloth and a mild, non-abrasive detergent. Avoid using harsh chemicals or abrasive cleaning pads, which can damage the stainless steel finish.
7 Issolvi l-problemi
Qabel ma tikkuntattja l-appoġġ għall-klijenti, jekk jogħġbok irreferi għall-gwida li ġejja għas-soluzzjoni tal-problemi għal kwistjonijiet komuni:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-kappa ma tixgħelx. | Ebda provvista ta 'enerġija. | Check if the power cord is securely plugged in and the circuit breaker has not tripped. |
| Qawwa baxxa ta 'ġbid. | Clogged grease filters or saturated carbon filters. | Clean aluminum grease filters. Replace carbon filters if operating in recirculation mode. |
| Storbju eċċessiv. | Komponenti maħlula jew installazzjoni mhux xierqa. | Ensure all mounting screws are tight. Check for obstructions in the fan or ducting. |
| Id-dwal ma jaħdmux. | Faulty LED bulb or electrical connection. | Check connections. If the bulb is replaceable, replace it. Contact service if issue persists. |
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Cecotec |
| Numru tal-Mudell | A01_EU01_110281 (TLT 604000) |
| Dimensjonijiet tal-Prodott | 30 x 59.8 x 21.5 ċm (Fond x Wisa' x Għoli) |
| Piż | 5.76 kg |
| Kulur | Inox (Stainless Steel finish) |
| Kapaċità ta 'Ġbid | 415 m³/h |
| Tip ta' Mutur | Mutur DC |
| Klassi tal-Enerġija | A+++ |
| Livelli ta' Veloċità | 3 |
| Tip ta' Kontroll | SS Touch Control |
| Dawl | LED |
| Livell ta' Storbju | 60 dB |
| Voltage | 220 Volts |
| Tip ta' Filtru tal-Grese | 5-layer Aluminum (Dishwasher-safe) |
| Odor Filter Type | Carbon (Included) |
| Pajjiż ta' Oriġini | Spanja |
9. Garanzija u Appoġġ
Cecotec products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to the warranty terms provided at the time of purchase.
- Disponibbiltà ta' Spare Parts: Spare parts for this appliance are available in the EU for a duration of 10 years from the date of purchase.
- Appoġġ għall-Klijent: For technical assistance, warranty claims, or to purchase replacement parts, please contact Cecotec customer service through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.
