1. Informazzjoni Importanti dwar is-Sigurtà
Please read all instructions carefully before using the Mayer MMIWD30-BY Instant Heating Water Dispenser. Retain this manual for future reference.
- Ensure the appliance is placed on a stable, flat, and heat-resistant surface.
- Tgħaddix l-apparat, il-korda tad-dawl, jew il-plagg fl-ilma jew kwalunkwe likwidu ieħor.
- Żomm fejn ma jintlaħaqx mit-tfal. Dan l-apparat mhuwiex maħsub għall-użu minn persuni b'kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa sakemm ma jkunux sorveljati.
- Always unplug the dispenser from the power outlet before cleaning or when not in use.
- Tħaddimx l-apparat jekk il-korda tal-enerġija jew il-plagg ikunu bil-ħsara, jew jekk l-apparat ma jaħdimx sew jew ikun ġarrab ħsara b'xi mod.
- The appliance features boil dry and overheating protection. If the water tank is empty, the dispenser will automatically shut off.
- Uża biss ilma tajjeb għax-xorb fit-tank tal-ilma.
- Exercise caution when dispensing hot water to prevent burns.
2. Prodott Aktarview
Familiarize yourself with the components of your Mayer Instant Heating Water Dispenser.
Figura 1: Naħa ta' quddiem view of the Mayer MMIWD30-BY Instant Heating Water Dispenser. The image shows the main unit with the water outlet on the left and the translucent water tank on the right. A drip tray is visible at the base.
Figura 2: Ġenb view of the Mayer MMIWD30-BY Instant Heating Water Dispenser, illustrating the detachable water tank being removed or inserted. The ultrafiltration filter is visible inside the water tank.
Komponenti:
- Main Dispenser Unit (with water outlet and control panel)
- Detachable Water Tank (3L capacity)
- Ultrafiltration Filter (pre-installed in water tank)
- Trej taqtir li jinqala'
- Korda tal-Enerġija
3. Setup
Follow these steps for the initial setup of your water dispenser.
- Ippakkja: Neħħi bir-reqqa l-materjali tal-ippakkjar kollha u kun żgur li l-komponenti kollha huma preżenti.
- Pjazzament: Place the dispenser on a stable, level, and dry surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
- Tank tal-Ilma Nadif: Before first use, remove the detachable water tank and rinse it thoroughly with clean water. The ultrafiltration filter is pre-installed; ensure it is securely in place.
- Imla t-Tank tal-Ilma: Fill the water tank with potable water up to the maximum fill line. Reattach the water tank securely to the main unit.
- Pożizzjoni tat-Trej tat-Tqattar: Place the detachable drip tray onto its designated slot at the base of the dispenser.
- Qabbad l-Enerġija: Plug the power cord into a grounded electrical outlet. The dispenser will enter standby mode.
- Initial Flush (Recommended): For first-time use or after filter replacement, dispense at least 500ml of water at 99°C to flush the system. Discard this water.
4. Istruzzjonijiet Operattivi
Your Mayer MMIWD30-BY dispenser features a sensor touch control panel for easy operation.
Funzjonijiet tal-Panew tal-Kontroll:
- Buttuna tal-Qawwa: To turn the dispenser on/off or enter standby mode.
- Għażla tat-Temperatura: Cycle through preset temperatures: 25°C, 45°C, 65°C, 85°C, 99°C. Precise 1°C interval control is available within these ranges.
- Għażla tal-Volum: Choose from preset cup sizes: 200ml, 350ml, 500ml.
- Buttuna tad-Dispensa: Press to start dispensing water.
- Lock tat-tfal: A safety feature to prevent accidental dispensing of hot water. Activate/deactivate by pressing and holding the child lock icon.
- Wiri LED: Shows selected temperature, volume, and status indicators.
Dispensing Ilma:
- Ensure the water tank is filled and the dispenser is plugged in.
- Place a cup or container on the drip tray directly under the water outlet.
- Select your desired water temperature using the temperature selection button.
- Select the desired water volume (200ml, 350ml, or 500ml) using the volume selection button.
- If the child lock is active, deactivate it.
- Press the dispense button. The dispenser will heat and dispense water in approximately 5 seconds.
- To stop dispensing before the selected volume is reached, press the dispense button again.
5. Manutenzjoni
Regular cleaning and maintenance will ensure optimal performance and longevity of your dispenser.
Tindif tat-Trej tat-Tqattar:
The detachable drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene.
- Carefully remove the drip tray from the dispenser.
- Vojta kwalunkwe ilma miġbur.
- Wash the drip tray with mild soap and warm water. Rinse thoroughly.
- Dry completely before reattaching to the dispenser.
Water Tank and Filter Maintenance:
The ultrafiltration filter helps remove impurities and reduce limescale. The filter should be replaced periodically based on water quality and usage, typically every 3-6 months.
- Unplug the dispenser and remove the water tank.
- Neħħi l-filtru l-antik mit-tank tal-ilma.
- Clean the water tank with mild soap and water, then rinse thoroughly.
- Insert a new ultrafiltration filter securely into the water tank.
- Refill the tank with potable water and reattach it to the dispenser.
- Perform an initial flush as described in the Setup section.
Tindif ta' barra:
Imsaħ il-barra tad-dispenser b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
6 Issolvi l-problemi
Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ilma mqassam | Water tank is empty or not properly seated. Child lock is active. Dispense button not pressed. | Refill water tank and ensure it is seated correctly. Deactivate child lock. Press the dispense button. |
| L-ilma mhux sħun biżżejjed | Incorrect temperature selected. | Verify the desired temperature is selected on the control panel. Allow a few seconds for heating. |
| Low water level indicator is on | Water level in the tank is low. | Imla t-tank tal-ilma b'ilma tajjeb għax-xorb. |
| Id-dispenser mhux qed jinxtegħel | Not plugged in. Power outage. | Ensure the power cord is securely plugged into a working outlet. Check your household's power supply. |
| L-ilma għandu togħma mhux tas-soltu | New filter or filter needs replacement. | Perform an initial flush if it's a new filter. Replace the ultrafiltration filter if it's old. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Mayer |
| Mudell | MMIWD30-BY |
| Kapaċità | 3 Litri |
| Voltage | 2200 Volts |
| Materjal | Plastik |
| Dimensjonijiet tal-Prodott (L x W x H) | 26L x 14.4W x 29.5H ċentimetri |
| Karatteristiċi Speċjali | Ultrafiltration Filter, Instant Heating, Child Lock, Detachable Drip Tray, Low Water Level Indicator, Boil Dry and Overheating Protection |
| Temperaturi ssettjati minn qabel | 25°C, 45°C, 65°C, 85°C, 99°C (with 1°C interval control) |
| Preset Volumes | 200ml, 350ml, 500ml |
| Ħin tat-Tisħin | Madwar 5 sekonda |
8. Garanzija u Appoġġ
Specific warranty terms and conditions for the Mayer MMIWD30-BY Instant Heating Water Dispenser are not provided in this document. For detailed warranty information, product registration, or technical support, please refer to the warranty card included with your purchase or contact Mayer customer service directly.
Please have your model number (MMIWD30-BY) and proof of purchase ready when contacting support.
