1. Introduzzjoni
The FeiyuTech SCORP-C2 is a professional 3-axis gimbal stabilizer designed for DSLR and mirrorless cameras. It features an integrated AI tracking module, a high payload capacity, and intuitive controls to enhance your videography experience. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.
Image 1.1: FeiyuTech SCORP-C2 Gimbal Stabilizer with a camera and remote control.
2. X'hemm fil-Kaxxa
Carefully unpack your FeiyuTech SCORP-C2 and verify that all items listed below are present:
- Feiyu Scorp-C2 Gimbal (Main body)
- Slider
- Upper Quick Release Plate
- L-Bracket Base (Horizontal Mount Plate)
- Lens Support Screw
- Lens Support Bracket
- Kamera Muntaġġ Invita
- Ċavetta Hex
- Tripod
- USB-C to Type-C Camera Control Cable
- USB-C Gimbal Charging Cable
Image 2.1: Detailed packing list of the FeiyuTech SCORP-C2 Gimbal Stabilizer and its accessories.
3. Setup
3.1. Iċċarġjar tal-Gimbal
Before first use, fully charge the gimbal battery. Connect the USB-C Gimbal Charging Cable to the gimbal's charging port and a USB power adapter (not included). The charging indicator will show the charging status.
3.2. Twaħħil tat-Tripod
Screw the included tripod onto the 1/4-inch thread at the bottom of the gimbal handle. Ensure it is securely fastened to provide a stable base for setup and balancing.
3.3. Immuntar tal-Kamera
- Attach the Upper Quick Release Plate to the bottom of your camera using the Camera Mounting Screw.
- Slide the camera with the attached quick release plate onto the Slider.
- Secure the Slider to the gimbal's L-Bracket Base (Horizontal Mount Plate).
- If using a long lens, attach the Lens Support Bracket and Lens Support Screw to provide additional stability.
3.4. Il-Bilanċjar tal-Gimbal
Proper balancing is crucial for optimal performance and to prevent motor strain. The SCORP-C2 features a 3-axis buckle lock design for easier balancing.
Image 3.1: Key design features for balancing and adjustment, including the 3-Axis Buckle Lock Design.
- Unlock Axes: Release all three axis locks (pan, tilt, roll) using the buckle design.
- Bilanċ tal-Assi tal-Inklinazzjoni: Adjust the camera forward or backward on the quick release plate until the camera remains level when tilted at any angle. Use the Tilt Adjustment Knob for fine-tuning.
- Bilanċ tal-Assi tar-Roll: Adjust the camera left or right on the quick release plate until it remains level horizontally.
- Bilanċ tal-Assi Pan: Hold the gimbal horizontally and adjust the pan arm until the camera remains stable without drifting.
Utilize the 3-Axis Scale Marks for millimeter-level precision leveling, which helps in recalling previous balance settings.
3.5. Tixgħil / Mitfi
Press and hold the power button to turn the gimbal on or off. Ensure the gimbal is properly balanced before powering on to prevent motor damage.
4. It-Tħaddim tal-Gimbal
4.1. Basic Controls and OLED Display
The SCORP-C2 features an integrated OLED screen and refined controls for intuitive operation.
Image 4.1: Button controls and OLED status screen on the FeiyuTech SCORP-C2.
- Joysticks: Controls the pan and tilt movement of the camera.
- Buttuna Rekord: Jibda u jwaqqaf ir-reġistrazzjoni tal-vidjo.
- Buttuna tal-Modalità (M): Cycles through different gimbal modes (e.g., Pan Follow, Lock Mode, All Follow).
- Left/Right Buttons (L/R): Customizable functions, often used for focus/zoom or specific mode adjustments.
- Auto Rotation Button (A): Initiates automatic rotation for specific shooting modes.
- Skrin OLED: Displays real-time status updates, current mode, battery level, and other settings.
4.2. Traċċar tal-AI
The SCORP-C2 includes a built-in AI 4.0 tracking module, eliminating the need for external apps for basic tracking functions. It supports gesture recognition and face tracking from distances up to 59 feet.
Image 4.2: The AI Tracking 4.0 system supports gesture control and face tracking.
To activate AI tracking, refer to the specific instructions in the full user manual for gesture commands or direct activation via the gimbal's controls.
4.3. Sparar Vertikali Nattiv
The modular design of the SCORP-C2 allows for quick and easy native vertical shooting without additional accessories.
Image 4.3: The gimbal's design facilitates native vertical shooting and offers an upgraded structure for flexible camera positioning.
4.4. Camera Control (Wired or Bluetooth)
Control your camera wirelessly via Bluetooth or through a control cable. This allows you to switch modes, start/stop recording, and adjust settings directly from the gimbal.
Image 4.4: Wireless Bluetooth connectivity for camera control.
Refer to the compatibility list in Section 6 to determine the appropriate connection method for your camera model.
4.5. Karatteristiċi Avvanzati
The Feiyu SCORP app unlocks additional advanced features for cinematic shots:
- A/B Motion Path Memory: Preset two points (A and B) for camera movement paths with customizable speed, angle, and dwell time.
- Time-lapse: Create dynamic time-lapse sequences.
- Panorama: Aqbad ritratti panoramiċi wesgħin.
- Mod tal-bidu: Achieve a spinning camera effect.
The high-precision Magic Wheel enables ultra-smooth focus or zoom control, enhancing creative possibilities.
Image 4.5: The Electric Multifunction Knob and A/B Point Trajectory Memory for precise control.
5. Manutenzjoni
5.1. Tindif
Wipe the gimbal with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the device. Keep the gimbal free from dust and debris, especially around the motors and joints.
5.2. Ħażna
When not in use, store the gimbal in a dry, cool place. Engage all axis locks to prevent accidental movement and protect the motors. If storing for an extended period, ensure the battery is charged to approximately 50-60% to prolong its lifespan.
5.3. Kura tal-batterija
Avoid fully discharging the battery frequently. Recharge the battery regularly, even if the gimbal is not in use, to maintain battery health. Use only the provided charging cable.
6. Speċifikazzjonijiet
Key technical specifications for the FeiyuTech SCORP-C2 Gimbal Stabilizer:
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | SCORP-C2 |
| Dimensjonijiet tal-Prodott | 9.83 x 6.91 x 13.56 pulzieri (24.97 x 17.55 x 34.44 ċm) |
| Daqs mitwi | 11.77 x 2.59 x 9.95 inches (Stowed and Locked) |
| Piż tal-oġġett | 2.91 liri (1.32 kg) |
| Tagħbija Massima | 7.72 lbs (3.5 kg) |
| Tip ta 'batterija | 1 Batterija Mhux Standard (inkluża) |
| Runtime tal-batterija | Sa 14 sigħat |
| Traċċar AI | Built-in AI 4.0 module, gesture recognition, face tracking (up to 59ft) |
| Konnettività | Wired (USB-C) or Bluetooth |
Image 6.1: The SCORP-C2 offers an upgraded payload capacity of 7.7 lbs.
6.1. Camera Compatibility List
Refer to the following tables for compatible camera models and tested lenses. Always check the latest compatibility information on the official FeiyuTech websit għall-aġġornamenti.
Image 6.2: Sony Camera and Lens Compatibility List.
Image 6.3: Canon Camera and Lens Compatibility List.
Image 6.4: Nikon, Sigma, and BMPCC Camera and Lens Compatibility List.
Image 6.5: Panasonic and Fujifilm Camera and Lens Compatibility List.
Compatibility Reminder: Always check your camera model using the compatibility list before mounting to ensure optimal performance. Some camera brands restrict third-party access to control features due to closed-source protocols, which may limit advanced controls on specific models.
7 Issolvi l-problemi
This section addresses common issues you might encounter with your FeiyuTech SCORP-C2 gimbal.
7.1. Gimbal Vibrates or Motors Overheat
- Iċċekkja l-Bilanċ: Ensure the camera is perfectly balanced on all three axes. Improper balance is the most common cause of vibration and motor strain.
- Tagħbija: Verify that your camera and lens combination does not exceed the gimbal's maximum payload capacity of 7.72 lbs (3.5 kg).
- Motor Strength: Adjust the motor strength settings via the gimbal's menu or the Feiyu SCORP app. If the motors are too strong or too weak for your setup, it can cause issues.
7.2. Camera Connection Status Not Displaying (Fujifilm/Panasonic)
If you are using a Fujifilm or Panasonic camera and the connection status does not appear on the gimbal screen, this is expected behavior. Both brands often use the audio jack for connection and control, and their transmission protocols do not support displaying the connection status on the gimbal's screen.
7.3. AI Tracking Not Responding
- Distanza: Ensure the subject is within the effective tracking range (up to 59 feet).
- Dawl: Good lighting conditions are essential for accurate AI tracking.
- Ostruzzjonijiet: Ensure there are no obstructions between the gimbal's AI module and the subject.
- Firmware: Check for and install any available firmware updates for the gimbal, as these often improve AI performance.
7.4. Il-Gimbal Mhux qed Jixgħel
- Livell tal-batterija: Ensure the battery is sufficiently charged. Connect the gimbal to a power source using the USB-C charging cable.
- Buttuna tal-Qawwa: Confirm that the power button is pressed and held for the required duration to power on the device.
8. Garanzija u Appoġġ
FeiyuTech products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official FeiyuTech websit jew ikkuntattja l-appoġġ tal-klijent.
8.1. Appoġġ għall-Klijent
If you encounter any issues not covered in this manual or require further assistance, please contact FeiyuTech customer support through their official channels. Provide your product model (SCORP-C2) and a detailed description of the issue for efficient service.
FeiyuTech is committed to continuously improving its products. Firmware updates are regularly released to enhance functionality and compatibility. It is recommended to keep your gimbal's firmware updated for the best user experience.
