KERDOM Foldable Electric Wheelchair User Manual

Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your KERDOM Foldable Electric Wheelchair, Model KD-B02. Please read this manual thoroughly before using the wheelchair to ensure proper understanding and to prevent injury or damage.

Informazzjoni dwar is-Sigurtà

Is-sigurtà tiegħek hija importanti ħafna. Dejjem segwi l-linji gwida ta' sigurtà li ġejjin:

• Always ensure the wheelchair is fully unfolded and locked before use.
• Engage the EABS parking system when stationary.
• Taqbiżx il-kapaċità ta 'piż massimu ta' 330 lbs.
• Avoid operating the wheelchair on slopes exceeding 12 degrees.
• Regularly inspect tires, brakes, and electrical connections.
• Żomm l-idejn u l-ilbies ’il bogħod minn partijiet li jiċċaqilqu.
• Use the seat belt at all times.
• Consult a healthcare professional for guidance on safe operation if you have any medical conditions.

Setup

Tiżvolġi s-Siġġu tar-Roti

The KERDOM electric wheelchair features a 3-second folding design for portability. To unfold:

1. Place the folded wheelchair on a flat, stable surface.
2. Gently pull the backrest upwards until the frame locks into place.
3. Press down on the seat cushion until it is flat and secure.
4. Kun żgur li l-mekkaniżmi ta 'qfil kollha jkunu ingaġġati qabel l-użu.

Figure 1: The KERDOM Foldable Electric Wheelchair in its unfolded state, ready for use.

Attaching the Joystick Controller

The 360° joystick controller can be attached to either the left or right armrest for user convenience.

1. Locate the mounting bracket on the desired armrest.
2. Slide the joystick controller onto the bracket until it clicks into place.
3. Secure the controller using the provided screw or locking mechanism.
4. Connect the controller cable to the corresponding port on the wheelchair frame.

Figura 2: Dettaljat view of attaching the joystick controller to the armrest.

Kejbils tal-Enerġija li jgħaqqdu

Ensure all power cables are securely connected before operating the wheelchair. Incorrect connections can lead to improper function or charging issues.

1. Locate the main power cable connectors near the battery compartment.
2. Connect the red power cord securely. Failure to do so may result in the charging indicator lighting up while charging, but not actually charging.
3. Verify that all motor cables are correctly plugged in. If the wheelchair operates in the opposite direction, check and correct the left and right motor wire connections.

Istruzzjonijiet Operattivi

Tixgħel u Mitfi

• To power on: Press and hold the power button on the joystick controller until the indicator lights illuminate.
• Biex titfi: Agħfas u żomm il-buttuna tal-qawwa mill-ġdid sakemm id-dwal indikatur jintfew.

Driving the Wheelchair

The 360° flexible joystick provides precise control over movement.

• Quddiem/Lura: Gently push the joystick forward or pull it backward.
• Tidwir: Push the joystick left or right to steer.
• Waqfien: Release the joystick to its neutral position. The EABS parking system will automatically engage, stopping the wheelchair safely.

Figure 3: The intelligent 360° flexible joystick for precise maneuverability, showing controls for balance, steering sensitivity, and safe stopping on inclines.

Speed Adjustment and Horn

• Aġġustament tal-veloċità: Use the '+' and '-' buttons on the joystick controller to increase or decrease the speed. The LED display will show the current speed setting.
• Qarn: Press the horn button on the joystick controller to activate the horn for safety.

Operazzjoni tal-Modalità Manwali

To push the wheelchair manually without power, you need to disengage the motors.

1. Ensure the handbrake is in the down position.
2. Pull out the clutches on both sides of the wheelchair (located near the rear wheels). This disengages the motors, allowing the wheels to move freely.
3. To re-engage electric power, push the clutches back in.

Figure 4: Location of the manual brake and clutches for switching between electric and manual modes.

Manutenzjoni

Kura u Iċċarġjar tal-Batterija

• Iċċarġja l-batterija kompletament qabel l-ewwel użu.
• Uża biss iċ-ċarġer ipprovdut.
• Tiċċarġjax iżżejjed il-batterija. Skonnettja l-ċarġer ladarba l-batterija tkun mimlija.
• Store the wheelchair and battery in a cool, dry place.
• If storing for extended periods, charge the battery every 1-2 months to maintain its lifespan.

Figure 5: The LED display on the joystick shows battery life and speed clearly, aiding in timely charging.

Tindif u Ħażna

• Imsaħ il-qafas bir-reklamaramp drapp. Evita li tuża cleaners li joborxu.
• The breathable seat cushion can be removed for cleaning.
• For storage, fold the wheelchair as demonstrated in the setup section.
• Aħżen f'post niexef u protett 'il bogħod mix-xemx diretta u minn temperaturi estremi.

Figure 6: The compact, folded electric wheelchair fits easily into a car trunk for convenient transport and storage.

Kura tat-Tajers

The wheelchair is equipped with solid, puncture-resistant tires, eliminating the need for inflation. Periodically check for debris embedded in the treads and remove them to maintain traction.

Issolvi l-problemi

Jekk tiltaqa' ma' xi problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

• Mudell: KD-B02
• Kapaċità tal-piż: 330 lbs
• Dimensjonijiet tal-Prodott: 36.19"D x 24.8"W x 33.4"H
• Piż (mingħajr batterija): Madwar 57 lbs
• Mutur: Dual 250W motors (Total 500W)
• Batterija: 24V 12Ah Lithium-ion
• Materjal tal-qafas: Ħadid, Plastik
• Kontroll: 360° Joystick
• Sistema tal-Ibbrejkjar: EABS Parking System
• Anti-Tip Wheels: Inkluż
• Slope Capability: ≤12°
• Tajers: Puncture-resistant solid tires

Garanzija u Appoġġ

KERDOM provides a 12-month warranty for this electric wheelchair. For any queries, technical assistance, or warranty claims, please contact KERDOM's 24/7 US-based customer support. Our quick-response team aims to resolve issues within 24 hours.

Għal aktar informazzjoni, żur il- KERDOM Store.