ORICO USB-C 4-Bay Hard Drive Docking Station with Offline Clone

Introduzzjoni

This manual provides comprehensive instructions for the ORICO 6646C3 USB-C 4-Bay Hard Drive Docking Station. This device is designed for efficient data management, offering both direct computer connectivity and standalone offline cloning capabilities for 2.5-inch and 3.5-inch SATA SSDs and HDDs.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• 1 x Aluminum 4-Bay Hard Drive Docking Station
• 1 x 2-in-1 USB Type-C to Type-A/C Cable
• 1 x 12V Adapter tal-Enerġija
• 1 x Manwal għall-Utent

Image: Contents of the ORICO 6646C3 package, showing the docking station, cables, power adapter, and manual.

Karatteristiċi tal-Prodott

• 1:3 Offline Hard Drive Duplicator: Supports duplicating three copies simultaneously via one button without connecting to a computer.
• 80TB Capacity Expansion: Accommodates 2.5-inch and 3.5-inch SATA SSD/HDD with a maximum capacity of 4x20TB.
• Aluminum-Alloy Heat Dissipation: Constructed from durable aluminum alloy with a vertical design for efficient heat management.
• USB 3.2 Gen 1 Interface: Features a USB 3.2 Type-C to C interface, supporting transfer speeds up to 5Gbps, S.M.A.R.T, and TRIM functionalities.
• Kompatibilità Wiesgħa: Includes a USB C-C/C-A data cable for compatibility with various USB-C and USB-A devices (laptops, PCs, Xbox, desktops, routers) and operating systems (Windows XP/7/8/10/11, Mac OS 10 or later).
• Disinn faċli għall-utent: Equipped with a dust-proof shield for the SATA interface and shock-absorbing pads to minimize vibration.

Image: The ORICO 6646C3 docking station with multiple drives, highlighting its 80TB capacity expansion capability.

Image: The docking station connected to a computer, demonstrating its 5Gbps data transfer rate.

Image: Close-up of the ORICO 6646C3, showcasing its aluminum alloy construction for durability and heat dissipation.

Image: The docking station connected to its 12V/6.5A power adapter, highlighting safety features like overcurrent and overvoltagprotezzjoni.

Image: The ORICO 6646C3 demonstrating its broad compatibility with laptops, MacBooks, PCs, TVs, tablets, phones, routers, and gaming consoles via Type-C and USB-A connections.

Setup

1. Qabbad l-Enerġija: Connect the provided 12V power adapter to the docking station and then to a power outlet.
2. Daħħal id-Drajvs: Gently insert your 2.5-inch or 3.5-inch SATA SSD/HDD into the drive bays. Ensure the drives are fully seated into the SATA connectors. The dust-proof shield will retract as the drive is inserted.
3. Qabbad mal-Kompjuter (Mhux obbligatorju): If using the docking station with a computer, connect the USB C-C/C-A data cable from the docking station to an available USB port on your computer.
4. Qawwa Mixgħul: Press the power button on the docking station. The power indicator light will illuminate.

Istruzzjonijiet Operattivi

A. PC Connection Mode

When connected to a computer via the USB cable, the docking station functions as an external drive enclosure. Insert your drives, power on the device, and they will appear as removable storage on your computer. You can then access, transfer, and manage files as with any other external drive.

B. Offline Clone Function (1:3 Duplication)

The offline clone function allows you to duplicate data from a source disk to up to three target disks without requiring a computer connection. Importanti: Ensure all target disks have equal or greater capacity than the source disk. Data on the target disks will be overwritten during the cloning process. Back up any important data on target disks before proceeding.

1. Ipprepara d-Drives: Insert the source disk into the 'Source Disk' bay (usually marked 'A' or 'Disk 1'). Insert the target disks into the 'Target Disk' bays (usually marked 'B', 'C', 'D' or 'Disk 2', 'Disk 3', 'Disk 4').
2. Skonnettja mill-PC: Ensure the docking station is le connected to any computer via the USB cable.
3. Qawwa Mixgħul: Connect the power adapter and turn on the docking station.
4. Ibda l-Klonu: Press and hold the 'Clone' button for approximately 3-5 seconds until the clone progress indicator lights begin to flash.
5. Confirm Clone: Release the button, then quickly press and release the 'Clone' button again to confirm. The progress indicator lights (25%, 50%, 75%, 100%) will illuminate sequentially, indicating the cloning process has started.
6. Immonitorja l-Progress: The LED indicators will show the cloning progress. Each light represents a 25% completion increment. When all lights are solid, the cloning process is complete.
7. Itfi: Once cloning is complete, power off the docking station before removing the drives.

Image: Diagram showing the ORICO 6646C3 performing a 1:3 offline clone, with data flowing from one source disk to three target disks.

Manutenzjoni

• Keep the device in a dry, well-ventilated area, away from direct sunlight and heat sources.
• Clean the exterior with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• Ensure the SATA interface dust-proof shield is clean and free of debris when no drives are inserted.
• Always power off the device before inserting or removing drives to prevent data corruption or damage.

Issolvi l-problemi

• Drives not recognized by computer:
  • Ensure the USB cable is securely connected to both the docking station and the computer.
  • Verify the docking station is powered on.
  • Check if the drives are properly seated in their bays.
  • For new drives, they may need to be initialized and formatted in your computer's disk management utility.
  • Ipprova port jew kejbil USB differenti.
• Offline clone fails or does not start:
  • Confirm the docking station is disconnected from the computer.
  • Ensure the target disk(s) capacity is equal to or greater than the source disk.
  • Verify all drives are properly inserted.
  • Follow the clone initiation steps precisely (press and hold, then quick press).
  • If the issue persists, try using different drives to rule out drive-specific problems.
• Veloċitajiet baxxi tat-trasferiment tad-dejta:
  • Ensure you are using a USB 3.0/3.2 compatible port on your computer.
  • The actual speed can be affected by the performance of the hard drives themselves.
  • Avoid connecting the docking station through a USB hub if possible, connect directly to the computer.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation included with your product or visit the official ORICO websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.