1. Introduzzjoni
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. X'hemm fil-Kaxxa
- 1x Dimmer Light Switch
- 1x Wall Plate
- 4x Ġewż tal-Wajer
- 2x Viti Twil
- 2x Viti Qosra
- 1x Manwal tal-Utent (dan id-dokument)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mod ta' Operazzjoni | ON-OFF |
| Klassifikazzjoni kurrenti | 3 Amps |
| Vol Operattivtage | 125 Volts |
| Apparati Kompatibbli | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Tip ta' Kontroll | Push Button Manwali |
| Protokoll tal-Konnettività | N.A (No WiFi) |
| Dimensjonijiet (L x W x H) | 4.49 x 2.76 x 1.34 pulzieri |
| Piż tal-oġġett | 5 uqija |
| Kulur | Abjad |
Image: Product dimensions of the dimmer switch.
4. Installazzjoni
Importanti: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Itfi l-Enerġija: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltagtester.
- Neħħi s-Swiċċ il-Qadim: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Identifika l-Wajers: Identify the following wires in your electrical box:
- Wajer tal-Linja: Iġġorr l-enerġija mis-circuit breaker.
- Wajer tat-Tagħbija: Connects to the light fixture.
- Wajer newtrali: Typically white, required for this dimmer switch.
- Wajer tal-art: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Swiċċ Dimmer Wajer Abjad to Wall Box Wajer newtrali
- Swiċċ Dimmer Wajer Iswed to Wall Box Power Supply's Line (Live)
- Swiċċ Dimmer Wajer Aħmar to Wall Box Wajer tat-Tagħbija
- Swiċċ Dimmer Wajer Aħdar to Wall Box Wajer mitħun
- Immonta l-Iswiċċ: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Installa Pjanċa tal-Ħajt: Attach the new wall plate over the dimmer switch.
- Irrestawra l-Enerġija: Ixgħel il-qawwa lura fis-circuit breaker.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Operazzjoni
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
L-Ewwel Użu
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Kontrolli Fuqview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Buttuna tal-Qawwa: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Aġġustament Fine: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Aġġustament Fine: Press and hold to gradually decrease brightness by 1% each time. - Dwal indikaturi: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Funzjoni tal-Memorja
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Kompatibilità
This dimmer switch is compatible with various dimmable light sources:
- LED dimmable: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- L inkandexxentiamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp u LED lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
