1. Twissijiet ta 'Sigurtà Importanti
Before operating your Ausom DT2 Pro Electric Scooter, please read this manual thoroughly and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage.
- Always wear a helmet and appropriate safety gear (knee pads, elbow pads, gloves) when riding.
- Iffamiljarizza ruħek mal-liġijiet u r-regolamenti lokali dwar l-użu tal-iskuter elettriku.
- Issuqx f'kundizzjonijiet imxarrbin, xita qawwija, jew minn ġo għadajjar.
- Kun żgur li l-boltijiet u l-qafliet kollha jkunu ssikkati qabel kull rikba.
- Żomm veloċità sikura u dejjem oqgħod attent għal dak ta’ madwarek.
- Taqbiżx il-limitu massimu ta 'piż ta' 287 lbs (130 kg).
- Avoid sudden braking, especially at high speeds, to prevent loss of control.
2. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Ausom DT2 Pro Electric Scooter (folded)
- Ċarġer tal
- Manwal għall-Utent
- Ċwievet Allen (daqsijiet varji)
- Karti NFC
- Ingwanti
- Karta ta' tfakkira
3. Setup u Assemblea
The Ausom DT2 Pro Electric Scooter comes partially assembled. Follow these steps to complete the setup:
3.1 Kif tiftaħ l-iskuter
- Loosen the folding mechanism on the stem.
- Carefully unfold the stem until it locks into the upright position.
- Turn the folding mechanism clockwise to securely tighten it.
3.2 It-twaħħil tal-Manubriju
- Loosen the four screws on the stem clamp bl-użu taċ-ċavetta Allen provduta.
- Iftaħ il-clamp and place the handlebar onto the stem, ensuring it is centered.
- Tighten the four screws to secure the handlebar firmly.
3.3 Securing the LCD Display
- Place the LCD display onto the handlebar clamp.
- Secure the top of the display to the handlebar with four screws.
- Fasten the bottom of the display with two screws to further secure it to the handlebars.
Figure 3.1: Ausom DT2 Pro Electric Scooter, shown both folded for transport and fully unfolded for riding.
Video 3.1: Official unboxing and initial assembly guide for the DT2 Pro electric scooter, demonstrating the unfolding and handlebar attachment process.
4. Istruzzjonijiet Operattivi
Learn how to operate your Ausom DT2 Pro Electric Scooter safely and efficiently.
4.1 Powering On/Off and LCD Display
The smart LCD dashboard provides real-time information. Press the power button to turn the scooter on or off. The display shows speed, distance, remaining battery power, and current riding mode.
4.2 Riding Modes and Motor Control
The DT2 Pro features single and dual-motor drive options with 6 speed settings, including Eco, Sport, and Race modes. Use the DDM button (Single/Dual Motor Switching Button) to switch between motor configurations. The thumb throttle controls acceleration.
Figure 4.1: Illustration of the DT2 Pro's dual motor capability, highlighting its speed, uphill climbing ability, and triple speed modes (Eco/Sport/Race).
4.3 Sistema tal-Ibbrejkjar
The scooter is equipped with anti-lock braking (E-ABS) and dual hydraulic disc brakes for responsive and shorter stopping distances. Apply both brake levers evenly for optimal braking performance.
Figura 4.2: Dettaljat view of the scooter's dual hydraulic disc brakes and E-ABS system, designed for enhanced safety.
4.4 Sistema tad-Dawl
The all-round lighting system includes headlights, rear brake lights, ambient lights, and joystick-controlled turn signals to enhance visibility and safety, especially during night rides.
Figure 4.3: The comprehensive lighting system of the DT2 Pro, ensuring safer and more visible rides.
4.5 Karatteristiċi tas-Sigurtà
The DT2 Pro includes an NFC Security Lock for convenient and secure starting, preventing unauthorized use. It also features a Passcode Lock for added security. A hidden AirTag slot allows for discreet tracking (AirTag mhux inkluż).
Video 4.1: A riding demonstration video, showcasing the scooter's performance in various outdoor environments. While titled for L2 MAX, it provides a general riding experience overview relevant to Ausom scooters.
5. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u t-tħaddim sikur tal-iskuter tiegħek.
5.1 Kura tat-Tajers
The DT2 Pro is equipped with 10-inch puncture-proof tubeless tires. Regularly check tire pressure to ensure it is within the recommended range (refer to the tire sidewall for specific PSI). Proper tire pressure is crucial for ride quality, range, and preventing flats.
Figure 5.1: The robust 10-inch off-road tubeless tires, designed for stability on various terrains.
5.2 Brake System Inspection
Periodically inspect the hydraulic disc brakes for wear and tear. Ensure the brake levers operate smoothly and provide adequate stopping power. If you notice any issues, consult a qualified technician.
5.3 Kura tal-Batterija
Charge the 52V/23.4AH battery regularly, even when not in use, to maintain its health. Avoid completely draining the battery. Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
5.4 Tindif u Spezzjoni Ġenerali
Naddaf l-iskuter b'annunzjaamp cloth. Avoid using high-pressure water jets. Regularly check all visible cables, connections, and moving parts for any signs of damage or looseness. Ensure the dual swingarm suspension operates smoothly.
6 Issolvi l-problemi
This section addresses common issues you might encounter with your Ausom DT2 Pro Electric Scooter.
6.1 Tire Losing Air
- Kawża: Puncture, valve stem issue, or improper seating of the tubeless tire.
- Soluzzjoni: Check the tire for visible punctures. Ensure the valve stem is tight. If the tire continues to lose air, it may require professional repair or replacement. Regular inspection and maintaining correct tire pressure can help prevent this.
6.2 Scooter Not Reaching Max Speed or Single Motor Mode Not Working
- Kawża: Incorrect riding mode selected, low battery, motor malfunction, or controller issue.
- Soluzzjoni: Verify you are in the correct riding mode (e.g., Race mode for max speed). Ensure the battery is fully charged. Check the DDM button for proper function. If the issue persists, contact customer support.
6.3 Scooter Not Powering On
- Kawża: Low battery, loose connections, or power button malfunction.
- Soluzzjoni: Charge the scooter fully. Check all visible cable connections for looseness. If the scooter still does not power on, contact customer support.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | DT2 Pro |
| Qawwa tal-Mutur | 1100W*2 Brushless Motors (2200W total) |
| Veloċità Massima | 42 Mph |
| Medda Max | 71 Mil |
| Batterija | 52V/23.4AH (1216.8WH) |
| Daqs tat-Tajers | 10 Inches (Off-Road Tubeless) |
| Sistema tal-Ibbrejkjar | Anti-lock Braking (E-ABS) and Dual Hydraulic Disc Brakes |
| Tip ta' Sospensjoni | Dual Swingarm Suspension |
| Kapaċità massima tat-Tagħbija | 287 lbs (130 kg) |
| Materjal tal-qafas | Aluminju |
| Dimensjonijiet tal-oġġett (LxWxH) | 52 x 27 x 53.5 pulzieri |
| Angolu tat-Tlugħ | 53% (26°) |
8. Garanzija u Appoġġ
The Ausom DT2 Pro Electric Scooter comes with a limited warranty. For detailed information regarding warranty terms, coverage, and how to make a claim, please refer to the warranty card included in your package or visit the official Ausom websit.
For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact Ausom customer service through their official channels. Keep your purchase receipt and serial number handy for faster service.
