SRAM Apex 1 11-Speed Long Cage Rear Derailleur Instruction Manual

Introduzzjoni

This manual provides essential instructions for the installation, operation, and maintenance of your SRAM Apex 1 11-Speed Long Cage Rear Derailleur. Designed for reliable performance and precise shifting in 1x drivetrain systems, this component features a lightweight aluminum cage, sealed cartridge bearings, and a roller bearing clutch for enhanced chain stability. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your derailleur.

Informazzjoni dwar is-Sigurtà

Dejjem ilbes tagħmir tas-sigurtà xieraq meta taħdem fuq ir-rota tiegħek.
Ensure all bolts are tightened to the manufacturer's specified torque settings. Overtightening or undertightening can lead to component failure.
If you are unsure about any installation or adjustment procedure, consult a qualified bicycle mechanic.
Żomm idejk u ħwejġek 'il bogħod mill-partijiet li jiċċaqalqu waqt it-tħaddim u l-aġġustament.

Setup

1. Installazzjoni

Immuntar tad-Derailleur: Attach the derailleur to the derailleur hanger on your bicycle frame. Ensure it is seated correctly and tighten the mounting bolt to the specified torque.
Rotot tal-kejbil: Route the shift cable from your shifter to the derailleur. Secure the cable to the derailleur's cable anchor bolt, ensuring proper tension.
Installazzjoni tal-katina: Install the bicycle chain, ensuring it is the correct length for your 1x drivetrain setup. The chain should pass through the derailleur's cage correctly.

2. Aġġustament

Limit Screws (H and L)

The H (High) and L (Low) limit screws prevent the derailleur from shifting the chain off the smallest or largest cogs, respectively.

H-Screw Adjustment: Shift the chain to the smallest cog. Adjust the H-screw so that the upper pulley is directly aligned with the smallest cog. The chain should run smoothly without rubbing.
L-Screw Adjustment: Shift the chain to the largest cog. Adjust the L-screw so that the upper pulley is directly aligned with the largest cog. This prevents the chain from overshifting into the spokes.

B-Aġġustament tat-Tensjoni

The B-tension screw adjusts the gap between the upper derailleur pulley and the cassette cogs.

Shift the chain to the largest cog.
Adjust the B-tension screw to achieve a gap of approximately 5-6mm between the upper pulley and the largest cog. This ensures smooth shifting across the entire cassette.

Figura 1: Quddiem view of the SRAM Apex 1 Rear Derailleur, highlighting its compact design and pulley system.

Close-up of SRAM Apex 1 Rear Derailleur with Roller Bearing Clutch and Exact Actuation labels

Figura 2: Close-up view of the SRAM Apex 1 Rear Derailleur, showing the "Roller Bearing Clutch" and "Exact Actuation" technologies.

Operating the Derailleur

The SRAM Apex 1 derailleur is designed for 1x (single chainring) drivetrains, offering a wide range of gears with simplified operation.

Nibdlu 'l Fuq: Use the shifter lever to move the chain to smaller cogs for higher gears.
Nimxu 'l isfel: Use the shifter lever to move the chain to larger cogs for lower gears.
Ensure you are pedaling forward with moderate pressure when shifting to allow the chain to engage smoothly. Avoid shifting under heavy load.

Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your derailleur.

Tindif: Periodically clean the derailleur, especially the pulleys and cage, to remove dirt and grime. Use a mild degreaser and a brush, then rinse with water and dry thoroughly.
Lubrikazzjoni: Apply a small amount of bicycle-specific lubricant to the pivot points of the derailleur and the pulley bearings after cleaning or as needed. Avoid over-lubrication.
Spezzjoni: Regularly inspect the derailleur for any signs of damage, wear, or loose bolts. Check the derailleur hanger for alignment. A bent hanger can cause poor shifting.
Cable and Housing: Inspect the shift cable and housing for fraying, kinks, or corrosion. Replace them if necessary to maintain crisp shifting.

SRAM Apex 1 Rear Derailleur, rear view showing pulleys

Figura 3: Wara view of the SRAM Apex 1 Rear Derailleur, showing the jockey wheels and cage. Regular cleaning of these parts is crucial.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Tibdil bil-mod jew inkonsistenti	Incorrect cable tension Dirty or worn cable/housing Hanger tad-derailleur mgħawweġ	Adjust barrel adjuster for proper tension. Replace cable and housing. Check and straighten/replace derailleur hanger.
Chain rubs on derailleur cage	Incorrect limit screw adjustment Hanger tad-derailleur mgħawweġ	Re-adjust H or L limit screws. Check and straighten/replace derailleur hanger.
Chain falls off smallest/largest cog	Incorrect limit screw adjustment	Re-adjust H or L limit screws to prevent overshifting.
Operazzjoni storbjuża	Nuqqas ta 'lubrikazzjoni Dirty pulleys Incorrect B-tension	Lubricate pivot points and pulleys. Clean pulleys. Adjust B-tension screw.

Speċifikazzjonijiet

Ditta: SRAM
Isem tal-Mudell: Apiċi 1
Numru tal-Mudell: 00.7518.094.000
Veloċità: 11-Veloċità
Cage Length: Long Cage
Materjal: Aluminju
Piż tal-oġġett: 0.35 Kilogrammi
Tip ta 'Immuntar: Braze-On Mount (standard)
Teknoloġija: Exact Actuation, Roller Bearing Clutch, X-Horizon
Max Cog Capacity: Up to 32 teeth (standard, can be extended with specific hangers)

Garanzija u Appoġġ

The SRAM Apex 1 Rear Derailleur comes with a limited warranty. For detailed warranty information, claims, or technical support, please refer to the official SRAM website or contact your authorized SRAM dealer. Keep your proof of purchase for warranty purposes.

Għal aktar riżorsi u informazzjoni dwar il-prodott, żur il- SRAM Store on Amazon.

	Gwida għall-Installazzjoni u l-Manutenzjoni tad-Derailleurs SRAM 22 Gwida komprensiva għall-installazzjoni, l-aġġustament, u l-manutenzjoni tad-derailleurs SRAM 22, li tkopri s-setup tad-derailleur ta' quddiem u ta' wara, iż-żamma tal-katina, u l-proċeduri ġenerali ta' manutenzjoni.
	Gwida għall-Installazzjoni u l-Aġġustament tad-Derailleur ta' Wara SRAM Gwida komprensiva għall-installazzjoni u l-aġġustament tad-derailleurs ta' wara SRAM Max 33T/36T u XPLR, inkluż l-installazzjoni tal-katina, l-aġġustamenti tal-viti tal-limitu, u s-settings tad-distakk tal-katina.
	Manwal tal-Utent tas-Sistemi tat-Toroq SRAM 1x: Gwida għall-Installazzjoni u l-Aġġustament Manwal komprensiv għall-utent għas-Sistemi tat-Toroq SRAM 1x, li jiddeskrivi l-proċeduri ta' installazzjoni, aġġustament u manutenzjoni għall-komponenti tas-sistema ta' trasmissjoni tar-roti. Jinkludi struzzjonijiet pass pass u twissijiet ta' sigurtà.
	Gwida għall-Bidu Mgħaġġel tal-SRAM AXS Eagle Gwida komprensiva ta' bidu rapidu għall-komponenti tar-roti SRAM AXS Eagle, li tiddeskrivi l-użu tal-App SRAM AXS, l-iċċarġjar u l-installazzjoni tal-batterija, it-tqabbil tas-sistema, l-operazzjonijiet tal-bdil tal-gerijiet, u l-indikaturi tal-istatus tal-batterija.
	Manwal tal-Utent tas-Sistema SRAM eTap AXS: Gwida għall-Installazzjoni u t-Tħaddim Manwal komprensiv għall-utent għas-sistemi elettroniċi tal-bidla tal-gerijiet SRAM eTap AXS. Ikopri l-installazzjoni, is-setup, it-tħaddim, l-istruzzjonijiet tas-sigurtà, l-użu tal-App AXS, il-ġestjoni tal-batterija, u l-manutenzjoni għar-roti tat-triq u tal-grava. Gwida essenzjali għaċ-ċiklisti.
	Manwal tal-Utent tal-Miter tal-Enerġija SRAM Manwal komprensiv għall-utent għall-SRAM Power Meters, li jagħti dettalji dwar l-installazzjoni, is-setup, it-tqabbil, iż-żero, is-sostituzzjoni tal-batterija, il-manutenzjoni, u s-soluzzjoni tal-problemi għall-mudelli SRAM AXS u DUB-PWR.