Recaceik Dining Table Set with Faux Marble Top and Benches Instruction Manual

Informazzjoni Importanti dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel l-assemblaġġ u l-użu. Żomm dan il-manwal għal referenza futura.

• Kun żgur li l-partijiet kollha huma preżenti u mhux imħassra qabel tibda l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew imkissra.
• Arma l-prodott fuq wiċċ artab u nadif biex tevita l-grif.
• Tighten all fasteners securely, but do not overtighten. Periodically check and re-tighten fasteners as needed.
• Do not stand or sit on the table. The table is designed for dining and general surface use.
• Distribute weight evenly on the table and benches.
• Żomm partijiet żgħar 'il bogħod mit-tfal waqt l-assemblaġġ.
• Avoid placing hot items directly on the faux marble tabletop without protection.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek. Jekk xi partijiet huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

• 1 x Dining Table (Faux Marble Top, Metal Frame)
• 2 x Dining Benches (PU Leather Upholstered, Metal Frame)
• 1 x Hardware Pack (Screws, Allen Wrench, etc.)
• 1 x Assembly Instruction Sheet

Figura 1: Fuqview of the Recaceik 3-piece dining table set, showing the faux marble top table and two upholstered benches.

Istruzzjonijiet ta' Twaqqif u Assemblaġġ

Assembly typically takes less than 30 minutes. It is recommended to have two people for easier assembly.

1. Ħoll il-Komponenti: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Identify all table and bench components, including frames, tops, and hardware.
2. Arma l-Qafas tal-Mejda: Attach the table legs to the table frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
3. Waħħal il-wiċċ tal-mejda: Carefully place the faux marble tabletop onto the assembled table frame. Align the pre-drilled holes on the tabletop with the holes on the frame. Secure the tabletop to the frame using the appropriate screws. Once the tabletop is attached, fully tighten all screws on the table frame and tabletop.
4. Arma l-Oqfsa tal-Bank: For each bench, attach the bench legs to the bench frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
5. Attach Bench Seats: Carefully place each upholstered bench seat onto its assembled bench frame. Align the pre-drilled holes on the bench seat with the holes on the frame. Secure the bench seat to the frame using the appropriate screws. Once the bench seats are attached, fully tighten all screws on the bench frames and seats.
6. Kontroll Finali: Gently lift and move the assembled table and benches to their desired location. Ensure all parts are stable and level. Adjust the leveling feet if necessary to prevent wobbling.

Figura 2: Illustration of the table's dimensions and key construction elements, including the thickened metal frame and MDF material with marble decoration.

Istruzzjonijiet Operattivi (Użu)

This dining set is designed for versatile use in various living spaces.

• Dining: Use the table for meals, work, or other activities. The benches provide comfortable seating for up to four individuals.
• Iffrankar ta' Spazju: The benches are designed to tuck neatly under the table when not in use, maximizing floor space in smaller rooms or apartments.
• Pjazzament: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.

Figura 3: Demonstration of the space-saving design, showing benches both in use and neatly stored under the table.

Manutenzjoni u Kura

Proper care will extend the life and maintain the appearance of your dining set.

• Fuq il-Mejda tal-Irħam Falz:
  • Imsaħ it-tixrid immedjatament b'soft, damp drapp.
  • Clean regularly with a mild, non-abrasive cleaner and a soft cloth.
  • Evita kimiċi ħarxa, prodotti tat-tindif li joborxu, jew pads tal-għorik, għax dawn jistgħu jagħmlu ħsara lill-finitura.
  • Use coasters or placemats to protect the surface from hot dishes, scratches, and stains.
• PU Leather Benches:
  • Imsaħ nadif b'artab, damp drapp.
  • For tougher stains, use a mild soap solution and wipe dry immediately.
  • Avoid direct sunlight exposure to prevent fading and cracking.
  • Do not use abrasive cleaners, solvents, or furniture polish on PU leather.
• Qafas tal-metall: Imsaħ b'ċarruta ratba u niexfa biex tneħħi t-trab.
• Ġenerali: Periodically check and re-tighten all screws and bolts to ensure stability.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

Specific warranty details for this product are not provided in the available information. Please refer to your purchase documentation or contact the retailer for warranty information.

For any questions, missing parts, or assistance, please contact Recaceik customer support through the retailer where the product was purchased or visit the official Recaceik websit.