1. Introduzzjoni
The pTron KWM-1 is an omnidirectional Type C wireless microphone system designed for high-quality audio recording. It features DSP noise cancellation, a 25-meter wireless range, and a plug-and-play design for ease of use with compatible Type C devices. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
2. Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:
- 2 x Mikrofoni bla fili (Trasmettituri)
- 1 x Riċevitur tat-Tip C
- 1 x Cable tal-Iċċarġjar
- 1 x User Guide Card
- 4 x Mic Muffs (Windshields)
Image 2.1: The pTron KWM-1 wireless microphone system, showing two microphones with furry wind muffs and one Type C receiver.
3. Prodott Aktarview
The pTron KWM-1 system consists of two wireless microphones (transmitters) and one Type C receiver. Each microphone is equipped with an omnidirectional pickup pattern and DSP noise reduction technology for clear audio capture. The receiver connects directly to your device's Type C port.
Image 3.1: An infographic illustrating key features such as 360-degree audio sensing, DSP noise reduction, 1-hour charging for 5 hours endurance, Type-C charging, plug-and-play connectivity, and clear audio with foam and furry filters.
4. Gwida ta' Setup
4.1 Charging the Microphones and Receiver
Before initial use, ensure both microphones and the receiver are fully charged. Use the provided charging cable to connect the devices to a standard USB power source. A full charge typically takes approximately 1 hour and provides up to 5 hours of operation.
Image 4.1: Illustration showing the microphone and its battery performance: 1 hour charging time for 5 hours of endurance.
4.2 Connecting to Your Device (Plug & Play)
- Insert the Type C receiver into the Type C port of your smartphone or tablet. Ensure your device supports OTG (On-The-Go) function for external audio devices.
- Agħfas il-buttuna tal-qawwa fuq kull mikrofonu biex tixgħelhom.
- The microphones will automatically pair with the receiver. A successful connection is indicated by a stable light on the microphone.
Image 4.2: Step-by-step visual guide demonstrating the plug-and-play connection process: plug in the receiver, power on the microphone, and the devices will automatically pair for recording.
5. Istruzzjonijiet Operattivi
5.1 L-Ilbies tal-Mikrofonu
Clip the microphone onto your collar or clothing, ensuring the microphone head is facing towards your mouth for optimal sound capture. Use the provided mic muffs to reduce wind noise, especially in outdoor environments.
Image 5.1: A person wearing the pTron KWM-1 microphone clipped to their jacket, demonstrating its discreet placement and the furry wind filter for clear audio.
5.2 Reġistrar Awdjo
Once the microphone and receiver are paired, open your device's camera or audio recording application. The system will automatically use the external microphone for audio input. Begin recording as usual.
5.3 Omnidirectional Sound Pickup and Noise Reduction
The KWM-1 features an omnidirectional microphone, capturing sound equally from all directions. Integrated DSP (Digital Signal Processing) technology actively reduces background noise, enhancing the clarity of your recordings.
Image 5.2: Visual representation of the microphone's 360-degree omnidirectional sound pickup capability, indicating audio sensing from all directions.
Image 5.3: An illustration demonstrating the effect of DSP noise reduction technology, showing a 'before' waveform with noise and an 'after' waveform with enhanced, clearer audio.
5.4 Firxa bla fili
The system operates on a 2.4GHz wireless frequency, providing a stable connection up to 25 meters in open environments. Performance may vary depending on obstacles and electromagnetic interference.
Image 5.4: A scenic outdoor image illustrating the 25-meter long-range transmission capability of the 2.4GHz wireless microphone system.
6. Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf il-mikrofonu u r-riċevitur. Tużax prodotti tat-tindif likwidi jew solventi.
- Ħażna: Aħżen l-apparati f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Kura tal-batterija: For optimal battery life, avoid fully discharging the devices frequently. Charge them regularly, even if not in use for extended periods.
7 Issolvi l-problemi
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ħoss irreġistrat | Il-mikrofonu mhux mixgħul Ir-riċevitur mhux imqabbad sew Apparat mhux paired Device OTG function disabled | Ensure microphone is on Re-insert receiver firmly Check pairing indicator light Enable OTG in device settings |
| Poor audio quality / Excessive noise | Il-mikrofonu 'l bogħod wisq mis-sors Strong environmental noise Interferenza tar-riħ | Position microphone closer Uża f'ambjent aktar kwiet Ensure mic muff is properly installed |
| Intermittent connection / Short range | Obstacles between mic and receiver Batterija baxxa Interferenza elettromanjetika | Reduce distance, clear line of sight Recharge devices Itlaq minn apparati oħra mingħajr fili |
| Mikrofonu mhux qed jiċċarġja | Cable difettuż jew sors ta 'enerġija | Ipprova kejbil għall-iċċarġjar jew port USB differenti |
8. Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | KWM-1 |
| Brand | pTron |
| Teknoloġija tal-Konnettività | RF (2.4GHz) |
| Tip ta' Konnettur | USB Tip-Ċ |
| Mudell Polari | Omnidirezzjonali |
| Karatteristiċi Speċjali | Clip, Noise Reduction (DSP) |
| Apparati Kompatibbli | Smartphone, Tablet (with Type-C and OTG support) |
| Firxa Wireless | Sa 25 metri |
| Ħajja tal-batterija | Sa 5 sigħat |
| Ħin tal-Iċċarġjar | Appross. 1 siegħa |
| Fattur tal-Forma tal-Mikrofonu | Lavalier |
| Piż tal-oġġett | 30 Grams (per microphone) |
| Materjal | Acrylonitrile Butadiene Styrene |
| Dimensjonijiet tal-Prodott (LxWxH) | 5.7 x 2.8 x 3.4 Ċentimetru |
| Batteriji | 3 9V batteries required (included), Lithium Polymer |
9. Garanzija u Appoġġ
9.1 Garanzija tal-Manifattur
The pTron KWM-1 comes with a Garanzija tal-manifattur ta 'sena covering manufacturing defects only. Please retain your purchase receipt for warranty claims.
9.2 Appoġġ għall-Klijent
For technical assistance, warranty claims, or any product-related inquiries, please contact pTron customer support:
- Telefon: 040-67138888
- Email: support@ptron.in
Manifattur: PALRED ELECTRONICS PVT. LTD., SY.NR. 56, L-1 SULAR, GUNDLAPOCHAMPALLY VILLAGE, TECH PARK MTP, TSIIC-IALA NACHARAM, HYDERABAD - 500076, TELANGANA, L-INDJA
