Prodott Overview
The Pawfly 8 Inch 8 W Aquarium Color Enhancement LED Light (Model AL-2575) is designed to enhance the natural colors of fish and plants in 8 to 15-inch aquariums. This IPX8 waterproof light features brilliant RGB LEDs, offering 7 single color effects, a color-cycle mode, 6 intensity levels, and a smart timer function.
Karatteristiċi ewlenin:
- Quasi-Full Spectrum: 8 W power, 3600 LUX (at 12 inches) for enhanced aquatic colors.
- Dazzling Lighting: 7 single color effects (white, red, yellow, green, light blue, dark blue, purple) and a smooth color-cycle mode.
- Luminożità aġġustabbli: 6 intensity levels to customize lighting for your aquatic pets.
- Smart Timer & Memory: 8, 10, or 12-hour daily duration options with memory function for settings (excluding timing).
- Kostruzzjoni affidabbli: IPX8 waterproof design with an ETL-listed plug and 10.6-foot cable.
Setup Istruzzjonijiet
Follow these steps to properly install your Pawfly Aquarium Color Enhancement LED Light:
- Ippakkja: Carefully remove the light and all accessories from the packaging.
- Agħżel il-Metodu ta' Immuntar: The light can be installed using either the provided suction cups or sticky Velcro.
- Installazzjoni ta' Suction Cup: Attach the suction cups to the ends of the light bar. Press the suction cups firmly onto a clean, smooth, flat surface inside your aquarium, such as the tank wall. Ensure a secure grip.
- Velcro Installation: If using Velcro, clean and dry the desired mounting surface on the outside of your tank or under the hood. Apply one side of the Velcro strip to the light bar and the other side to the tank surface. Press firmly to secure.
- Pożizzjonament: Place the light in a position that provides optimal illumination for your aquarium.
- Qabbad l-Enerġija: Plug the ETL-listed power adapter into a suitable electrical outlet.
Istruzzjonijiet Operattivi
The Pawfly Aquarium Light is controlled via an inline controller with four buttons:
- Power On/Off & Mode Switching:
- Short Press (Power/Mode button): Turns the light on and cycles through the 7 single-color effects (white, red, yellow, green, light blue, dark blue, purple) and the color-cycle mode.
- Long Press (Power/Mode button): Itfi d-dawl.
- Aġġusta l-luminożità:
- Buttuna "+": Increases the brightness level (6 levels available).
- Buttuna "-": Decreases the brightness level (6 levels available).
- Issettja l-Timer:
- Buttuna tat-Tajmer: Cycles through 3 duration options: 8 hours, 10 hours, or 12 hours. Once set, the light will automatically turn on and off for the selected duration within each 24-hour cycle.
- Funzjoni tal-memorja: The light retains your last color and brightness settings even after a power outage. The timer setting, however, will need to be reset.
Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your aquarium light:
- Tindif: Regularly wipe the light bar with a soft, damp cloth to remove algae or mineral buildup. Do not use abrasive cleaners or solvents.
- Klassifikazzjoni li ma jgħaddix ilma minnha: The light is IPX8 waterproof, meaning it can effectively resist moisture intrusion and withstand soaking. However, ensure the power adapter and controller remain dry.
- Spezzjoni tal-Cable: Periodically check the power cable for any signs of damage. If the cable is damaged, discontinue use immediately.
Issolvi l-problemi
If you encounter issues with your Pawfly Aquarium Light, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Ebda provvista tal-enerġija; konnessjoni maħlula; adapter difettuż. | Check power outlet and connections. Ensure the adapter is securely plugged in. Try a different outlet. |
| Colors are not changing or brightness cannot be adjusted. | Controller malfunction; incorrect button press. | Ensure you are pressing the correct buttons as per operating instructions. If issues persist, contact customer support. |
| Il-funzjoni tat-tajmer mhix qed taħdem sew. | Timer not set properly; power interruption. | Re-set the timer by pressing the timer button until the desired duration is selected. Note that the timer needs to be reset after a power outage. |
| Id-dawl jidher baxx jew jitteptep. | Low brightness setting; power fluctuation; light damage. | Increase brightness using the "+" button. Ensure stable power supply. If flickering persists or light is damaged, discontinue use. |
Speċifikazzjonijiet
Detailed specifications for the Pawfly 8 Inch 8 W Aquarium Color Enhancement LED Light (Model AL-2575):
- Isem tal-Mudell: AL-2575
- Daqs: 8 Inch 8 W
- Qawwa: 8 Watts
- LUX (at 12 inches): 3600
- Dimensjonijiet tal-Prodott: 8.07 x 1.18 x 0.55 pulzieri
- Piż tal-oġġett: 6.7 uqija
- Tip ta' Sors tad-Dawl: LED
- Għażliet tal-Kulur Dawl: Red, Green, Blue, White, Yellow, Light Blue, Dark Blue, Purple
- Materjal: Aluminju
- Tip ta 'Finish: Miżbugħa
- Klassifikazzjoni li ma jgħaddix ilma minnha: IPX8
- Sors tal-Enerġija: Corded Elettriku
- Tul tal-Cable: 10.6 pied
- Komponenti Inklużi: Aquarium Color Enhancement Light
- Użu fuq ġewwa/barra: Ġewwa
Garanzija u Appoġġ
Pawfly products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the product packaging or contact Pawfly customer service. If you have any questions, require technical assistance, or need to report an issue, please reach out to our support team through the retailer's platform or the official Pawfly websit.
