SEBSON Outdoor Motion Sensor IP65 User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Sensor IP65, Model IR_OUT_GA. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: The SEBSON Outdoor Motion Sensor IP65, a charcoal-colored unit designed for wall or ceiling mounting.

2. Istruzzjonijiet tas-Sigurtà

• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont ir-regolamenti lokali tal-wajers.
• Kun żgur li l-provvista tal-enerġija hija skonnettjata qabel l-installazzjoni jew il-manutenzjoni.
• Do not exceed the maximum load capacity specified in the technical data.
• This product is designed for outdoor use with IP65 protection; however, avoid direct high-pressure water jets.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

Il-pakkett jinkludi:

• 1 x SEBSON IR Motion Sensor IP65
• Aċċessorji tal-immuntar (viti, tappijiet tal-ħajt)
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Karatteristiċi tal-prodott

The SEBSON Outdoor Motion Sensor IP65 is an infrared (IR) motion sensor designed for reliable outdoor use. Key features include:

• Immuntar versatili: Suitable for both wall and ceiling surface mounting.
• Firxa Wiesgħa ta' Sejbien: Up to 24 meters with a 360° angle when ceiling-mounted, or 12 meters with a 180° angle when wall-mounted.
• Settings programmabbli: Adjustable duty cycle (light duration), ambient brightness (LUX), and detection sensitivity.
• Funzjoni ta' Dawwar: The sensor head can be vertically swiveled by 180° for precise detection area adjustment.
• High Protection Class: IP65 rated for outdoor weather resistance.
• Kompatibbli LED: Supports LED lighting up to 600W and incandescent lamps sa 1200W.

Immaġni 4.1: Fuqview of key features including detection range, power compatibility, IP rating, and adjustable settings.

Image 4.2: The sensor head can be swiveled vertically by 180 degrees to adjust the detection area.

5. Setup u Installazzjoni

5.1 Post tal-Immuntar

Choose a suitable location for mounting the sensor. Consider the desired detection area and avoid placing it near heat sources, air conditioning units, or areas with frequent, unwanted movement (e.g., swaying branches) that could trigger false detections.

• Immuntar tas-saqaf: Provides a 360° detection angle with a range of 10m to 24m. Ideal for open areas.
• Immuntar tal-ħajt: Provides a 180° detection angle with a range of 5m to 12m. Suitable for pathways or specific directional coverage.

Immaġni 5.1: Eż.ample of the motion sensor installed on an outdoor wall.

Image 5.2: Detection range and angle variations for ceiling and wall installations.

5.2 Wiring (3-Wire Installation)

The sensor requires a 3-wire connection. Ensure the power supply is OFF before proceeding.

1. Connect the Live (L) wire from the power supply to the Live input terminal on the sensor.
2. Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the sensor.
3. Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture.
4. Connect the Neutral (N) wire from the lighting fixture to the Neutral input terminal on the sensor (or directly to the main Neutral).
5. Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.

Image 5.3: Base of the sensor showing wiring access points.

5.3 Installazzjoni Fiżika

1. Mark the drilling points on the wall or ceiling using the sensor's base as a template.
2. Agħmel toqob u daħħal tappijiet tal-ħajt jekk meħtieġ.
3. Secure the sensor base to the mounting surface with screws.
4. Perform wiring as described in section 5.2.
5. Attach the sensor body to the base, ensuring a tight seal for IP65 protection.
6. Adjust the sensor head to the desired angle using the swivel mechanism.

6. Istruzzjonijiet Operattivi u Aġġustamenti

The SEBSON motion sensor features three adjustable settings to customize its operation:

Image 6.1: Adjustment dials for TIME, SENS (Sensitivity), and LUX (Ambient Brightness).

6.1 TIME (Switch-off Delay)

This dial adjusts how long the connected light remains ON after motion is no longer detected. The range is approximately 10 seconds to 15 minutes.

• Turn the dial clockwise to increase the duration.
• Turn the dial counter-clockwise to decrease the duration.

6.2 LUX (Ambient Brightness)

This dial determines the ambient light level at which the sensor will activate. The range is 0.1 LUX (darkness) to 2000 LUX (daylight).

• Set to the 'sun' symbol (max LUX) for activation during both day and night.
• Set to the 'moon' symbol (min LUX) for activation only in low light conditions or darkness.
• Adjust incrementally to find the desired activation threshold.

6.3 SENS (Sensitivity/Detection Range)

This dial adjusts the sensitivity of the motion detection, effectively controlling the detection range.

• Turn clockwise for maximum sensitivity and detection range.
• Turn counter-clockwise for minimum sensitivity and detection range.
• Adjust to prevent false triggers from distant objects or small animals.

7. Manutenzjoni

• Regularly clean the sensor lens with a soft, damp cloth to ensure optimal detection performance. Do not use abrasive cleaners.
• Check wiring connections periodically for any signs of wear or corrosion.
• Ensure the sensor is free from obstructions like spiderwebs, leaves, or snow, which can impair its function.
• No user-serviceable parts inside. Do not attempt to open the main housing.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

Immaġni 9.1: Dimensjonijiet tal-prodott.

10. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.